Relands #114356. Compared to the last version, this patch only merges
poison-generating/nsz flags from the select to fix LV regression in
`llvm/test/Transforms/PhaseOrdering/AArch64/predicated-reduction.ll`.
Given a recursive phi with select:
%p = phi [ 0, entry ], [ %sel, loop]
%sel = select %c, %other, %p
The fp state can be calculated using the knowledge that the select/phi
pair can only be the initial state (0 here) or from %other. This adds a
short-cut into computeKnownFPClass for PHI to detect that the select is
recursive back to the phi, and if so use the state from the other
operand.
This helps to address a regression from #83200.
This is a follow up to 924907bc6, and is mostly motivated by consistency
but does include one additional optimization. In general, we prefer 0.0
over -0.0 as the identity value for an fadd. We use that value in
several places, but don't in others. So, let's be consistent and use the
same identity (when nsz allows) everywhere.
This creates a bunch of test churn, but due to 924907bc6, most of that
churn doesn't actually indicate a change in codegen. The exception is
that this change enables the use of 0.0 for nsz, but *not* reasoc, fadd
reductions. Or said differently, it allows the neutral value of an
ordered fadd reduction to be 0.0.
The idea behind this canonicalization is that it allows us to handle less
patterns, because we know that some will be canonicalized away. This is
indeed very useful to e.g. know that constants are always on the right.
However, this is only useful if the canonicalization is actually
reliable. This is the case for constants, but not for arguments: Moving
these to the right makes it look like the "more complex" expression is
guaranteed to be on the left, but this is not actually the case in
practice. It fails as soon as you replace the argument with another
instruction.
The end result is that it looks like things correctly work in tests,
while they actually don't. We use the "thwart complexity-based
canonicalization" trick to handle this in tests, but it's often a
challenge for new contributors to get this right, and based on the
regressions this PR originally exposed, we clearly don't get this right
in many cases.
For this reason, I think that it's better to remove this complexity
canonicalization. It will make it much easier to write tests for
commuted cases and make sure that they are handled.
This patch moves branch condition creation to enter the scalar epilogue
loop to VPlan. Modeling the branch in the middle block also requires
modeling the successor blocks. This is done using the recently
introduced VPIRBasicBlock.
Note that the middle.block is still created as part of the skeleton and
then patched in during VPlan execution. Unfortunately the skeleton needs
to create the middle.block early on, as it is also used for induction
resume value creation and is also needed to properly update the
dominator tree during skeleton creation.
After this patch lands, I plan to move induction resume value and phi
node creation in the scalar preheader to VPlan. Once that is done, we
should be able to create the middle.block in VPlan directly.
This is a re-worked version based on the earlier
https://reviews.llvm.org/D150398 and the main change is the use of
VPIRBasicBlock.
Depends on https://github.com/llvm/llvm-project/pull/92525
PR: https://github.com/llvm/llvm-project/pull/92651
Use VPIRBasicBlock to wrap the middle block and implement patching up
branches in predecessors in VPIRBasicBlock::execute. The IR middle block
is only created after skeleton creation. Initially a regular
VPBasicBlock is created, which will later be replaced by a
VPIRBasicBlock once the middle IR basic block has been created.
Note that this slightly changes the order of instructions created in the
middle block; code generated by recipe execution in the middle block
will now be inserted before the terminator (and in between the compare
to used by the terminator). The original order will be restored in
https://github.com/llvm/llvm-project/pull/92651.
PR: https://github.com/llvm/llvm-project/pull/95816
Folding a `select` into a floating point binary operators can only be
done if the result is preserved for both case. In particular, if the
other operand of the `select` can be a NaN, then the transformation
won't preserve the result value.
This patch canonicalizes getelementptr instructions with constant
indices to use the `i8` source element type. This makes it easier for
optimizations to recognize that two GEPs are identical, because they
don't need to see past many different ways to express the same offset.
This is a first step towards
https://discourse.llvm.org/t/rfc-replacing-getelementptr-with-ptradd/68699.
This is limited to constant GEPs only for now, as they have a clear
canonical form, while we're not yet sure how exactly to deal with
variable indices.
The test llvm/test/Transforms/PhaseOrdering/switch_with_geps.ll gives
two representative examples of the kind of optimization improvement we
expect from this change. In the first test SimplifyCFG can now realize
that all switch branches are actually the same. In the second test it
can convert it into simple arithmetic. These are representative of
common optimization failures we see in Rust.
Fixes https://github.com/llvm/llvm-project/issues/69841.
Check lines for some of these tests were regenerated. The difference
is that with opaque pointers SCEVExpander always emits i8 GEPs,
making the address calculation explicit. This is a known problem
that will be solved long term by making all address calculations
explicit.
MVE can treat v16i1, v8i1, v4i1 and v2i1 as different views onto the
same 16bit VPR.P0 register, with v2i1 holding two 8 bit values for the
two halves. This was never treated as a legal type in llvm in the past
as there are not many 64bit instructions and no 64bit compares. There
are a few instructions that could use it though, notably a VSELECT (as
it can handle any size using the underlying v16i8 VPSEL), AND/OR/XOR for
similar reasons, some gathers/scatter and long multiplies and VCTP64
instructions.
This patch goes through and makes v2i1 a legal type, handling all the
cases that fall out of that. It also makes VSELECT legal for v2i64 as a
side benefit. A lot of the codegen changes as a result - usually in way
that is a little better or a little worse, but still expensive. Costs
can change a little too in the process, again in a way that expensive
things remain expensive. A lot of the tests that changed are mainly to
ensure correctness - the code can hopefully be improved in the future
where it comes up in practice.
The intrinsics currently remain using the v4i1 they previously did to
emulate a v2i1. This will be changed in a followup patch but this one
was already large enough.
Differential Revision: https://reviews.llvm.org/D114449
This patch marks the induction increment of the main induction variable
of the vector loop as NUW when not folding the tail.
If the tail is not folded, we know that End - Start >= Step (either
statically or through the minimum iteration checks). We also know that both
Start % Step == 0 and End % Step == 0. We exit the vector loop if %IV +
%Step == %End. Hence we must exit the loop before %IV + %Step unsigned
overflows and we can mark the induction increment as NUW.
This should make SCEV return more precise bounds for the created vector
loops, used by later optimizations, like late unrolling.
At the moment quite a few tests still need to be updated, but before
doing so I'd like to get initial feedback to make sure I am not missing
anything.
Note that this could probably be further improved by using information
from the original IV.
Attempt of modeling of the assumption in Alive2:
https://alive2.llvm.org/ce/z/H_DL_g
Part of a set of fixes required for PR50412.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D103255
D99674 stopped the folding of certain select operations into and/or, due
to incorrect folding in the presence of poison. D97360 added some costs
to attempt to account for the change, but only worked at the getUserCost
level, not the getCmpSelInstrCost that the vectorizer will use directly.
This adds similar logic into the vectorizer to handle these logical
and/or selects, treating them like and/or directly.
This fixes 60% performance regressions from code like the attached test
case.
Differential Revision: https://reviews.llvm.org/D99884
