Instead of using several callbacks to identify the pointer escape event,
checkers now can register for the checkPointerEscape.
Converted the Malloc checker to use the new callback.
SimpleStreamChecker will be converted next.
llvm-svn: 170625
performance heuristic
After inlining a function with more than 13 basic blocks 32 times, we
are not going to inline it anymore. The idea is that inlining large
functions leads to drastic performance implications. Since the function
has already been inlined, we know that we've analyzed it in many
contexts.
The following metrics are used:
- Large function is a function with more than 13 basic blocks (we
should switch to another metric, like cyclomatic complexity)
- We consider that we've inlined a function many times if it's been
inlined 32 times. This number is configurable with -analyzer-config
max-times-inline-large=xx
This heuristic addresses a performance regression introduced with
inlining on one benchmark. The analyzer on this benchmark became 60
times slower with inlining turned on. The heuristic allows us to analyze
it in 24% of the time. The performance improvements on the other
benchmarks I've tested with are much lower - under 10%, which is
expected.
llvm-svn: 170361
We don't handle array destructors correctly yet, but we now apply the same
hack (explicitly destroy the first element, implicitly invalidate the rest)
for multidimensional arrays that we already use for linear arrays.
<rdar://problem/12858542>
llvm-svn: 170000
top level.
This heuristic is already turned on for non-ObjC methods
(inlining-mode=noredundancy). If a method has been previously analyzed,
while being inlined inside of another method, do not reanalyze it as top
level.
This commit applies it to ObjCMethods as well. The main caveat here is
that to catch the retain release errors, we are still going to reanalyze
all the ObjC methods but without inlining turned on.
Gives 21% performance increase on one heavy ObjC benchmark, which
suffered large performance regressions due to ObjC inlining.
llvm-svn: 169639
This is the case where the analyzer tries to print out source locations
for code within a synthesized function body, which of course does not have
a valid source location. The previous fix attempted to do this during
diagnostic path pruning, but some diagnostics have pruning disabled, and
so any diagnostic with a path that goes through a synthesized body will
either hit an assertion or emit invalid output.
<rdar://problem/12657843> (again)
llvm-svn: 169631
This reduces analysis time by 1.2% on one test case (Objective-C), but
also cleans up some of the code conceptually as well. We can possible
just make RegionBindingsRef -> RegionBindings, but I wanted to stage
things.
After this, we should revisit Jordan's optimization of not canonicalizing
the immutable AVL trees for the cluster bindings as well.
llvm-svn: 169571
Previously we would search for the last statement, then back up to the
entrance of the block that contained that statement. Now, while we're
scanning for the statement, we just keep track of which blocks are being
exited (in reverse order).
llvm-svn: 169526
This doesn't seem to make much of a difference in practice, but it does
have the potential to avoid a trip through the constraint manager.
llvm-svn: 169524
Whenever we touch a single bindings cluster multiple times, we can delay
canonicalizing it until the final access. This has some interesting
implications, in particular that we shouldn't remove an /empty/ cluster
from the top-level map until canonicalization.
This is good for a 2% speedup or so on the test case in
<rdar://problem/12810842>
llvm-svn: 169523
This feature was probably intended to improve diagnostics, but was currently
only used when dumping the Environment. It shows what location a given value
was loaded from, e.g. when evaluating an LValueToRValue cast.
llvm-svn: 169522
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
llvm-svn: 169237
The stop-gap here is to just drop such objects when processing the InitListExpr.
We still need a better solution.
Fixes <rdar://problem/12755044>.
llvm-svn: 168757
This was also covered by <rdar://problem/12753384>. The static analyzer
evaluates a CXXConstructExpr within an initializer expression and
RegionStore doesn't know how to handle the resulting CXXTempObjectRegion
that gets created. We need a better solution than just dropping the
value, but we need to better understand how to implement the right
semantics here.
Thanks to Jordan for his help diagnosing the behavior here.
llvm-svn: 168741
The AllocaRegion did not have the superRegion (based on LocationContext)
as part of it's hash. As a consequence, the AllocaRegions from
different frames were uniqued to be the same region.
llvm-svn: 168599
In code like this:
void foo() {
bar();
baz();
}
...the location for the call to 'bar()' was being used as a backup location
for the call to 'baz()'. This is fine unless the call to 'bar()' is deemed
uninteresting and that part of the path deleted.
(This looks like a logic error as well, but in practice the only way 'baz()'
could have an invalid location is if the entire body of 'foo()' is
synthesized, meaning the call to 'bar()' will be using the location of the
call to 'foo()' anyway. Nevertheless, the new version better matches the
intent of the code.)
Found by Matt Beaumont-Gay using ASan. Thanks, Matt!
llvm-svn: 168080
This fixes a few cases where we'd emit path notes like this:
+---+
1| v
p = malloc(len);
^ |2
+---+
In general this should make path notes more consistent and more correct,
especially in cases where the leak happens on the false branch of an if
that jumps directly to the end of the function. There are a couple places
where the leak is reported farther away from the cause; these are usually
cases where there are several levels of nested braces before the end of
the function. This still matches our current behavior for when there /is/
a statement after all the braces, though.
llvm-svn: 168070
This allows us to properly remove dead bindings at the end of the top-level
stack frame, using the ReturnStmt, if there is one, to keep the return value
live. This in turn removes the need for a check::EndPath callback in leak
checkers.
This does cause some changes in the path notes for leak checkers. Previously,
a leak would be reported at the location of the closing brace in a function.
Now, it gets reported at the last statement. This matches the way leaks are
currently reported for inlined functions, but is less than ideal for both.
llvm-svn: 168066
We do this by using the "most recent" good location: if a synthesized
function 'A' calls another function 'B', the path notes for the call to 'B'
will be placed at the same location as the path note for calling 'A'.
Similarly, the call to 'A' will have a note saying "Entered call from...",
and now we just don't emit that (since the user doesn't have a body to look
at anyway).
Previously, we were doing this for the "Calling..." notes, but not for the
"Entered call from..." or "Returning to caller". This caused a crash when
the path entered and then exiting a call within a synthesized body.
<rdar://problem/12657843>
llvm-svn: 168019
conditions.
The adjustment is needed only in case of dynamic dispatch performed by
the analyzer - when the runtime declaration is different from the static
one.
Document this explicitly in the code (by adding a helper). Also, use
canonical Decls to avoid matching against the case where the definition
is different from found declaration.
This fix suppresses the testcase I added in r167762, so add another
testcase to make sure we do test commit r167762.
llvm-svn: 167780
Suppresses a leak false positive (radar://12663777).
In addition, we'll need to rewrite the adjustReturnValue() method not to
return UnknownVal by default, but rather assert in cases we cannot
handle. To make it possible, we need to correctly handle some of the
edge cases we already know about.
llvm-svn: 167762
Previously, RegionStore was being VERY conservative in saying that because
p[i].x and p[i].y have a concrete base region of 'p', they might overlap.
Now, we check the chain of fields back up to the base object and check if
they match.
This only kicks in when dealing with symbolic offset regions because
RegionStore's "base+offset" representation of concrete offset regions loses
all information about fields. In cases where all offsets are concrete
(s.x and s.y), RegionStore will already do the right thing, but mixing
concrete and symbolic offsets can cause bindings to be invalidated that
are known to not overlap (e.g. p[0].x and p[i].y).
This additional refinement is tracked by <rdar://problem/12676180>.
<rdar://problem/12530149>
llvm-svn: 167654
As Anna pointed out, ProgramStateTrait.h is a relatively obscure header,
and checker writers may not know to look there to add their own custom
state.
The base macro that specializes the template remains in ProgramStateTrait.h
(REGISTER_TRAIT_WITH_PROGRAMSTATE), which allows the analyzer core to keep
using it.
llvm-svn: 167385
This will simplify checkers that need to register for leaks. Currently,
they have to register for both: check dead and check end of path.
I've modified the SymbolReaper to consider everything on the stack dead
if the input StackLocationContext is 0.
(This is a bit disruptive, so I'd like to flash out all the issues
asap.)
llvm-svn: 167352
