Depends on #120010
Support `R_AARCH64_AUTH_TLSDESC_ADR_PAGE21`, `R_AARCH64_AUTH_TLSDESC_LD64_LO12`
and `R_AARCH64_AUTH_TLSDESC_LD64_LO12` static relocations and
`R_AARCH64_AUTH_TLSDESC` dynamic relocation. IE/LE optimization is not
currently supported for AUTH TLSDESC.
ecb5ea6a266d5cc4e05252f6db4c73613b73cc3b tried to fix cases when LLD
links what seems to be import library header objects from MSVC. However,
the fix seems incorrect; the review at https://reviews.llvm.org/D133627
concluded that if this (treating this kind of symbol as a common symbol)
is what link.exe does, it's fine.
However, this is most probably not what link.exe does. The symbol
mentioned in the commit message of
ecb5ea6a266d5cc4e05252f6db4c73613b73cc3b would be a common symbol with a
size of around 3 GB; this is not what might have been intended.
That commit tried to avoid running into the error ".idata$4 should not
refer to special section 0"; that issue is fixed for a similar style of
section symbols in 4a4a8a1476b1386b523dc5b292ba9a5a6748a9cf.
Therefore, revert ecb5ea6a266d5cc4e05252f6db4c73613b73cc3b and extend
the fix from 4a4a8a1476b1386b523dc5b292ba9a5a6748a9cf to also work for
the section symbols in MSVC generated import libraries.
The main detail about them, is that for symbols of type
IMAGE_SYM_CLASS_SECTION, the Value field is not an offset, but it is an
optional set of flags, corresponding to the Characteristics of the
section header (although it may be empty).
This change implements support for the /stub flag to align with MS
link.exe. This option is useful when a program needs to optimize the DOS
program that executes when the PE runs on DOS, avoiding the traditional
hardcoded DOS program in LLD.
This commit improves the memory efficiency of the lld-macho linker by
optimizing how thunks are printed in the map file. Previously, merging
vectors of input sections required creating a temporary vector, which
increased memory usage and in some cases caused the linker to run out of
memory as reported in comments on
https://github.com/llvm/llvm-project/pull/120496. The new approach
interleaves the printing of two arrays of ConcatInputSection in sorted
order without allocating additional memory for a merged array.
When LLD links against an import library (for the regular, short import
libraries), it doesn't actually link in the header/trailer object files
at all, but synthesizes new corresponding data structures into the right
sections.
If the whole of such an import library is forced to be linked, e.g. with
the -wholearchive: option, we actually end up linking in those
header/trailer objects. The header objects contain a construct which LLD
fails to handle; previously we'd error out with the error ".idata$4
should not refer to special section 0".
Within the import library header object, in the import directory we have
relocations towards the IAT (.idata$4 and .idata$5), but the header
object itself doesn't contain any data for those sections.
In the case of GNU generated import libraries, the header objects
contain zero length sections .idata$4 and .idata$5, with relocations
against them. However in the case of LLVM generated import libraries,
the sections .idata$4 and .idata$5 are not included in the list of
sections. The symbol table does contain section symbols for these
sections, but without any actual associated section. This can probably
be seen as a declaration of an empty section.
If the header/trailer objects of a short import library are linked
forcibly and we also reference other functions in the library, we end up
with two import directory entries for this DLL, one that gets
synthesized by LLD, and one from the actual header object file. This is
inelegant, but should be acceptable.
While it would seem unusual to link import libraries with the
-wholearchive: option, this can happen in certain scenarios.
Rust builds libraries that contain relevant import libraries bundled
along with compiled Rust code as regular object files, all within one
single archive. Such an archive can then end up linked with the
-wholarchive: option, if build systems decide to use such an option for
including static libraries.
This should fix https://github.com/msys2/MINGW-packages/issues/21017.
This works for the header/trailer object files in import libraries
generated by LLVM; import libraries generated by MSVC are vaguely
different. ecb5ea6a266d5cc4e05252f6db4c73613b73cc3b did an attempt at
fixing the issue for MSVC generated libraries, but it's not entirely
correct, and isn't enough for making things work for that case.
Move `LinkerDriver::addUndefined` to` SymbolTable` to allow its use with
both symbol tables on ARM64X and rename it to `addGCRoot` to clarify its
distinct role compared to the existing `SymbolTable::addUndefined`.
Command-line `-include` arguments now apply to the EC symbol table, with
`mainSymtab` introduced in `linkerMain`. There will be more similar
cases. For `.drectve` sections, the corresponding symbol table is used
based on the context.
Follow up to PR118508, to avoid unnecessary compile time for an empty
combind regular LTO module if all modules end up being ThinLTO only.
This required minor changes to a few tests to ensure they weren't empty.
According to the binutils spec:
https://sourceware.org/binutils/docs/ld/Input-Section-Basics.html
You should be able to specify all files in an archive using this syntax
`archivename:` , however, lld currently will only accept `archivename:*`
to match all files within an archive.
This patch will, only when necessary, create a copy of the file
specification and add an implicit wildcard `*` to the end. It also
updates the filename-spec linkerscript test to check for this behavior.
---------
Co-authored-by: Peter Smith <peter.smith@arm.com>
This change ensures the load config in the hybrid image view is handled
correctly. It introduces a new Arm64XRelocVal class to abstract
relocation values, allowing them to be relative to a symbol. This class
will also be useful for managing ARM64X relocation offsets in the
future.
This change ensures that base relocations are sorted in the output,
aligning with MSVC linker behavior. While input files typically provide
sorted relocations, this update guarantees correct sorting even if the
input relocations are unordered.
This patch extends the MachO linker's map file generation to include
branch extension thunk symbols. Previously, thunks were omitted from the
map file, making it difficult to understand the final layout of the
binary, especially when debugging issues related to long branch thunks.
This change ensures thunks are included and correctly interleaved with
other symbols based on their address, providing an accurate
representation of the linked output.
Port https://reviews.llvm.org/D117354 from the MachO port.
If both --symbol-ordering-file and call graph profile are present, the
--symbol-ordering-file takes precedence, but the call graph profile is
still used for symbols that don't appear in the order file.
In addition, call graph profile described sections are now ordered
before other sections.
cg_profile in object is from CGProfilePass and it is often inaccurate.
While call-graph-ordering-file is provided by user. It is weird to
aggregate them together especially when call-graph-ordering-file is
accurate enough.
This already worked without /wholearchive; now it works with it too.
(Only for thin archives containing relative file names, matching the ELF
and Mach-O ports.)
The commit 22b7b84860d39da71964c9b329937f2ee1d875ba
made the symbols provided by shared libraries "defined",
and thus effectively made it impossible to generate non-pie
dynamically linked executables using
--unresolved-symbols=import-dynamic.
This commit, based on https://github.com/llvm/llvm-project/pull/109249,
fixes it by checking sym->isShared() explictly.
(as a bonus, you don't need to rely on
--unresolved-symbols=import-dynamic
anymore.)
Fixes https://github.com/llvm/llvm-project/issues/107387
This can be used with /llvmlibthin to create thin archives without an
index, which is a prerequisite for porting
https://reviews.llvm.org/D117284 to lld-link.
Creating files like this is already possible with `llvm-ar rcS`, so this
doesn't add additional problems.
That change forgot to set `lazy` to false before calling `addFile()` in
`forceLazy()` which caused `addFile()` to parse the file we want to
force a load for to be added as a lazy object again instead of adding
the file to `ctx.objFileInstances`.
This is caught by a pretty simple test (included).
If foo.obj is eagerly loaded (due to a prior undef referencing one if
its symbols) and has more than one symbol, we used to assert:
SymbolTable::addLazyObject() for the first symbol would set `lazy` to
false and load all symbols from the file, but the outer
ObjFile::parseLazy() loop would continue to run and call addLazyObject()
for the second symbol, which would assert.
Instead, just stop adding lazy symbols if the file got loaded for real
while adding a symbol.
(The ELF port has a similar early exit in `ObjFile<ELFT>::parseLazy()`.)
Depends on #114525
Support `R_AARCH64_AUTH_GOT_ADR_PREL_LO21` and `R_AARCH64_AUTH_GOT_LD_PREL19`
GOT-generating relocations. A corresponding `RE_AARCH64_AUTH_GOT_PC` member
of `RelExpr` is added, which is an AUTH-specific variant of `R_GOT_PC`.
Previously, we'd collect all input files in Driver::filePaths, and then
write filePaths after all other flags in
createResponseFile(). This meant that `-start-lib foo.obj -end-lib`
would be written as `-start-lib -end-lib foo.obj`, changing semantics.
Instead, remove Driver::filePaths, and handle things that fed into it
directly:
* OPT_INPUT is now handled in the same way as other flags, so that we
now get `-start-lib foo.obj -end-lib` in response.txt as desired. Add a
test for -start-lib / -end-lib and /reproduce:.
* OPT_wholearchive_file needs explicit handling now -- but before, this
was buggy as well: We'd put the flag without a rewritten path in
response.txt, but also the rewritten input file without wholearchive
semantics via filePaths. So this commit makes --whole-archive work with
/reproduce: too, and adds test coverage.
* /defaultlib:foo is now written as /defaultlib:foo into response.txt,
instead of writing the resolved path previously. While response.txt
looks slightly differently, both should have the same semantics, and
this should be mostly a no-op. (It does require updating a test.)
* /defaultlib: from .drectve sections are no longer recorded in
response.txt. This seems like a progression -- in the non-repro case
they come from .obj files, so they should come (only) from there in the
repro case too. This adds test coverage for this case.
Makes createResponseFile() look more like the versions in the ELF and
MachO ports too.
Depends on #113811
Support `R_AARCH64_AUTH_ADR_GOT_PAGE`, `R_AARCH64_AUTH_GOT_LO12_NC` and
`R_AARCH64_AUTH_GOT_ADD_LO12_NC` GOT-generating relocations. For preemptible
symbols, dynamic relocation `R_AARCH64_AUTH_GLOB_DAT` is emitted. Otherwise,
we unconditionally emit `R_AARCH64_AUTH_RELATIVE` dynamic relocation since
pointers in signed GOT needs to be signed during dynamic link time.
On hybrid ARM64X targets, ARM64 and ARM64EC input files operate in
separate namespaces and cannot reference each other. This change
introduces separate `SymbolTable` instances and associates each
`InputFile` with the appropriate table to reflect this behavior.
