Summary:
This function existed (with identical code) in both NativeProcessLinux
and NativeProcessNetBSD, and it is likely that it would be useful to any
future implementation of NativeProcessProtocol.
Therefore I move it to the base class.
Reviewers: krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52719
llvm-svn: 343683
This is a follow-up to https://reviews.llvm.org/D46362.
When evaluating a complex expression in DWARFExpression::Evaluate,
file addresses must be resolved to load addresses before we can
perform operations such as DW_OP_deref on them.
For this the address goes through three steps
1. Read the file address as stored in the DWARF
2. Link/relocate the file address (when reading from a .dSYM, this is a no-op)
3. Convert the file address to a load address.
D46362 implemented step (3) by resolving the file address using the
Module that the original DWARF came from. In the case of a dSYM that
is correct, but when reading from .o files, we need to look up
relocated/linked addresses, so the right place to look them up is the
current frame's module. This patch fixes that by setting the
expression's Module to point to the linked debugmap object.
A word a bout the unorthodox testcase: The motivating testcase for
this fix is in Swift, but I managed to hand-modify LLVM-IR for a
trivial C program to exhibit the same problem, so we can fix this in
llvm.org.
rdar://problem/44689915
Differential Revision: https://reviews.llvm.org/D52678
llvm-svn: 343612
Summary:
If there is no newline the "lldb" prompt could be on the wrong line. To reproduce the missing newline you can do 'image dump smytab' on any binary.
Previously
Symtab, file = D:\upstream\build\Debug\bin\clang-diff.exe, num_symbols = 0(lldb)
Now
Symtab, file = D:\upstream\build\Debug\bin\clang-diff.exe, num_symbols = 0
(lldb)
Reviewers: zturner, aleksandr.urakov, lldb-commits
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D52627
llvm-svn: 343497
Currently we reject our own default disassembly-format string because it
contains two backticks which causes everything in between to be
interpreter as an expression by the command interpreter. This patch
fixes that by escaping backticks when dumping format strings.
llvm-svn: 343471
Summary:
This function encodes the knowledge of whether the PC points to the
breakpoint instruction of the one following it after the breakpoint is
"hit". This behavior mainly(*) depends on the architecture and not on the
OS, so it makes sense for it to be implemented in the base class, where
it can be shared between different implementations (Linux and NetBSD
atm).
(*) It is possible for an OS to expose a different API, perhaps by doing
some fixups in the kernel. In this case, the implementation can override
this function to implement custom behavior.
Reviewers: krytarowski, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52532
llvm-svn: 343409
Summary: A RichManglingContext constructed with an invalid demangled name or with a demangled function name without any context will have an empty context. This triggers an assertion in RichManglingContext::GetBufferRef() when debugging a native Windows process on x86 when it shouldn't. Remove the assertion.
Reviewers: aleksandr.urakov, zturner, lldb-commits
Reviewed By: zturner
Subscribers: erik.pilkington
Differential Revision: https://reviews.llvm.org/D52626
llvm-svn: 343292
- Add latency timings to GDB packet log summary if timestamps are on log
- Add the ability to plot the latencies for each packet type with --plot
- Don't crash the script when target xml register info is in wierd format
llvm-svn: 343243
Summary:
The `ClangUserExpression::GetLanguageForExpr` method is currently a big
source of sadness, as it's name implies that it's an accessor method, but it actually
is also initializing some variables that we need for parsing. This caused that we
currently call this getter just for it's side effects while ignoring it's return value,
which is confusing for the reader.
This patch renames it to `UpdateLanguageForExpr` and merges all calls to the
method into a single call in `ClangUserExpression::PrepareForParsing` (as calling
this method is anyway mandatory for parsing to succeed)
While looking at the code, I also found that we actually have two language
variables in this class hierarchy. The normal `Language` from the UserExpression
class and the `LanguageForExpr` that we implemented in this subclass. Both
don't seem to actually contain the same value, so we probably should look at this
next.
Reviewers: xbolva00
Reviewed By: xbolva00
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52561
llvm-svn: 343191
Summary:
This patch implements restoring of the calling convention from PDB.
It is necessary for expressions evaluation, if we want to call a function
of the debuggee process with a calling convention other than ccall.
Reviewers: clayborg, zturner, labath, asmith
Reviewed By: clayborg
Subscribers: teemperor, lldb-commits, stella.stamenova
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D52501
llvm-svn: 343084
NativeProcessProtocol::ReadMemoryWithoutTrap had a bug, where it failed
to properly remove inserted breakpoint opcodes if the memory read
partially overlapped the trap opcode. This could not happen on x86
because it has a one-byte breakpoint instruction, but it could happen on
arm, which has a 4-byte breakpoint instruction (in arm mode).
Since triggerring this condition would only be possible on an arm
machine (and even then it would be a bit tricky). I test this using a
NativeProcessProtocol unit test.
llvm-svn: 343076
Summary:
* This patch fixes hanging of the test in case of using python3, changes callback
function that will be called if the timer ends, changes python interpreter to
`%python` that is set up by llvm-lit.
* Also, the test didn't work properly since it didn't contain a call of
filecheck_proc.communicate(), that means that filecheck didn't run and its
return code was equal to 0 in all cases.
Reviewers: teemperor, labath, tatyana-krasnukha, aprantl
Reviewed By: teemperor, labath
Subscribers: ki.stfu, lldb-commits
Differential Revision: https://reviews.llvm.org/D52498
llvm-svn: 343033
max number of stack frames to backtrace, make it a setting,
target.process.thread.max-backtrace-depth.
Add a test case for the setting.
<rdar://problem/28759559>
llvm-svn: 343029
Set the "mydir" attribute of an inline test on the test-specific class,
instead of on the base InlineTest class.
This makes it possible to run dotest.py on a directory containing inline
tests. This wasn't really possible prior to this patch, because what
would happen is that one test would just run over and over again, even
though the test infrastructure would claim that different tests were
being run.
Example:
The test infrastructure claimed that all of these different tests were passing,
which couldn't be true --
$ ./bin/lldb-dotest /Users/vsk/src/tailcall/lldb/test/testcases/functionalities/tail_call_frames/ -G dwarf -t 2>&1 | grep PASS
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestDisambiguateTailCallSeq)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestArtificialFrameStepOutMessage)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestAmbiguousTailCallSeq1)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestDisambiguatePathsToCommonSink)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestDisambiguateCallSite)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestUnambiguousTailCalls)
PASS: LLDB (/Users/vsk/src/builds/tailcall-RA/bin/clang-8-x86_64) :: test_dwarf (lldbsuite.test.lldbtest.TestAmbiguousTailCallSeq2)
RESULT: PASSED (7 passes, 0 failures, 0 errors, 24 skipped, 0 expected failures, 0 unexpected successes)
... because it wasn't even looking at some of these tests:
$ ./bin/lldb-dotest /Users/vsk/src/tailcall/lldb/test/testcases/functionalities/tail_call_frames/ -G dwarf -t 2>&1 | grep "Change dir"
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/sbapi_support
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/thread_step_out_or_return
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
Change dir to: /Users/vsk/src/tailcall/lldb/packages/Python/lldbsuite/test/functionalities/tail_call_frames/ambiguous_tail_call_seq2
E.g it was only building one of them:
$ ls lldb-test-build.noindex/functionalities/tail_call_frames/
ambiguous_tail_call_seq2
Differential Revision: https://reviews.llvm.org/D52516
llvm-svn: 343023
On linux, we do not support automatic loading of dependent modules, so
the module list will always contain just one module (until the target is
launched).
llvm-svn: 343016
Summary:
The target-select-so-path test might hang on
some platforms. The reason of that behavior
was in incorrect usage of Filecheck and lldb-mi
processes. Instead of redirecting lldb-mi's output
to Filecheck, we should run lldb-mi session,
finish the session, collect its output and then pass
it to Filecheck.
Also, this patch adds a timer to the test to prevent
it from hanging in the future.
Reviewers: tatyana-krasnukha, aprantl, teemperor
Reviewed By: tatyana-krasnukha, teemperor
Subscribers: apolyakov, aprantl, teemperor, ki.stfu, abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D52139
llvm-svn: 342915
Summary:
NativeProcessProtocol is an abstract class, but it still contains a
significant amount of code. Some of that code is tested via tests of
specific derived classes, but these tests don't run everywhere, as they
are OS and arch-specific. They are also relatively high-level, which
means some functionalities (particularly the failure cases) are
hard/impossible to test.
In this approach, I replace the abstract methods with mocks, which
allows me to inject failures into the lowest levels of breakpoint
setting code and test the class behavior in this situation.
Reviewers: zturner, teemperor
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D52152
llvm-svn: 342875
AbsPosToLineColumnPos is the only reader of m_user_expression_start_pos
and actually treats it like a size_t. Also the value we store in
m_user_expression_start_pos is originally a size_t, so it makes sense
to change the type of this variable to size_t.
llvm-svn: 342804
The 'test_filename' property in TestBase changes over time, so
attempting to find a check file relative to the directory containing
'test_filename' is flaky.
Use the absolute path of the check file as that's always correct (and
simpler). This relies on the test driver changing into the test
directory, which it seems we can safely assume.
As a drive-by, make self.filecheck respect the trace (-t) option.
llvm-svn: 342699
When creating a target, lldb loads all dependent files (i.e. libs in
LC_LOAD_DYLIB for Mach-O). This can be confusing, especially when two
versions of the same library end up in the shared cache. It's possible
to change this behavior, by specifying target create -d <target> these
dependents are not loaded.
This patch changes the default behavior to only load dependent files
only when the target is an executable. When creating a target for a
library, it is now no longer necessary to pass -d. The user can still
override this behavior by specifying the -d option to change this
behavior.
rdar://problem/43721382
Differential revision: https://reviews.llvm.org/D51934
llvm-svn: 342634
