Although it is located under tools/lldb-server, this test is very
different that other lldb-server tests. The most important distinction
is that it does not test lldb-server directly, but rather interacts with
it through the lldb client. It also tests the relevant client
functionality (the platform connect command, which is even admitted in
the test name). The fact that this test is structured as a lldb-server
test means it cannot access most of the goodies available to the
"normal" lldb tests (the runCmd function, which it reimplements; the
run_break_set_by_symbol utility function; etc.).
This patch makes it a full-fledged lldb this, and rewrites the relevant
bits to make use of the standard features. I also move the test into the
"commands" subtree to better reflect its new status.
BlockPointerSyntheticFrontEnd does a CopyType which results in it copying the type
back into its own context. This will result in a call to ASTImporterDelegate::setOrigin
with &decl->getASTContext() == origin.ctx this can result in an infinite recursion
later on in ASTImporter since it will attempt to find the decl in its origin which will be itself.
Differential Revision: https://reviews.llvm.org/D96366
There is a .categories file in the python_api directory that makes all nested tests
belong to the category "pyapi". The decorator is unnecessary for these tests.
Native register descriptions in LLDB specify lldb register numbers in
value_regs and invalidate_regs lists. These register numbers may not
match with Process gdb-remote register numbers which are generated by
native process after counting all registers in its register sets.
It was coincidentally not causing any problems as we never came across
a native target with dynamically changing register sets and register
numbers generated by counter matched with LLDB native register numbers.
This came up while testing target AArch64 SVE which can choose register
sets based on underlying hardware.
This patch fixes this behavior and always tries to use remote register
numbers while reading/writing registers over gdb-remote protocol.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D77043
This patch tries to improve memory-read from core files
(in order to improve disassembly functionality).
I am using RHEL 7.7 (linux kernel 3.10) and for a lot of cases,
I was not able to disassemble some functions from backtrace when
debugging crashes from core files. It outputs some dummy code.
The cause of the problem was the fact we are returning all the zeros
from ProcessElfCore::ReadMemory() that is being called within
Disassembler::ParseInstructions() and it disassembles some dummy
opcodes from the buffer returned. Therefore, we are removing zero
bytes filling (padding) completely.
Differential Revision: https://reviews.llvm.org/D93939
This test passes on arm64 (Apple Silicon). I assume that "aarch64" still
ensures this gets skipped on Linux. I don't have access to such and
environment so I'll have to rely on the bot complaining.
Replace the dotest command line options and various cmake variables,
which are used for passing the locations of llvm tools to the API tests
with a single variable, which points to the directory these tools are
placed in. Besides reducing repetition, this also makes things more
similar to how "normal" llvm tests are configured.
Differential Revision: https://reviews.llvm.org/D95261
I switched the watch simulator test from i386 to using x86_64, but
apparently that's not supported on the bots. Rollback to using i386 and
solve the original issue by passing the target, similar to what I did
in TestSimulatorPlatform.py.
Honor the CPU type (and subtype) when launching the inferior on macOS.
Part of this functionality was thought to be no longer needed and
removed in 85bd4369610fe60397455c8e0914a09288285e84, however it's still
needed, for example to launch binaries under Rosetta 2 on Apple Silicon.
This patch will use posix_spawnattr_setarchpref_np if available and
fallback to posix_spawnattr_setbinpref_np if not.
Differential revision: https://reviews.llvm.org/D95922
Convert `assertTrue(a == b)` to `assertEqual(a, b)` to produce better failure messages.
These were mostly done via regex search & replace, with some manual fixes.
Differential Revision: https://reviews.llvm.org/D95813
This reverts commit 754ab803b8dc659e3645d369d1b5d6d2f97be29e.
As pointed out in https://reviews.llvm.org/D95761, this patch could lead to
having the wrong execution context in some situations (thanks Jim!).
D92164 is addressing the same issue and will replace this patch, so I'll
revert this one.
This patch skips the test for the SBTarget::IsLoaded method on windows
since the logic is different.
Differential Revision: https://reviews.llvm.org/D95686
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds an `SBTarget::IsLoaded(const SBModule&) const` endpoint
to lldb's Scripting Bridge API. As the name suggests, it will allow the
user to know if the module is loaded in a specific target.
rdar://37957625
Differential Review: https://reviews.llvm.org/D95686
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
stella.stemenova mentioned in https://reviews.llvm.org/D93951 failures on Windows for this test.
I'm fixing the macro definitions and disabling the tests for python
versions lower than 3.7. I'll figure out that actual issue with
python3.6 after the buildbots are fine again.
Identical to previous commits that just add a standard library template to the
supported template list and test it. Adding this rather obscure class to the
template list is mostly caused by the std::deque test unexpectedly referencing
this type when testing against newer libc++ versions on macOS.
Fixes TestQueueFromStdModule and TestQueueFromStdModule on macOS.
Fixes rdar://73213589
Second try, handling both a bogus arch string and the "null file & arch" used
to create an empty but valid target.
Also check in that case before logging (previously the logging would have
crashed.)
Also revert "Follow on to: f05dc40c31d1883b46b8bb60547087db2f4c03e3"
After these changes, multiple lldb tests are failing. Calls to
CreateTargetWithFileAndArch(None, None) appear to fail after these
changes.
This reverts commit f05dc40c31d1883b46b8bb60547087db2f4c03e3 and
1fba21778f84f266f7d32153c88e59e1900fbe5b.
Depends on D93874.
runInTerminal was using --wait-for, but it was some problems because it uses process polling looking for a single instance of the debuggee:
- it gets to know of the target late, which renders breakpoints in the main function almost impossible
- polling might fail if there are already other processes with the same name
- polling might also fail on some linux machine, as it's implemented with the ps command, and the ps command's args and output are not standard everywhere
As a better way to implement this so that it works well on Darwin and Linux, I'm using now the following process:
- lldb-vscode notices the runInTerminal, so it spawns lldb-vscode with a special flag --launch-target <target>. This flags tells lldb-vscode to wait to be attached and then it execs the target program. I'm using lldb-vscode itself to do this, because it makes finding the launcher program easier. Also no CMAKE INSTALL scripts are needed.
- Besides this, the debugger creates a temporary FIFO file where the launcher program will write its pid to. That way the debugger will be sure of which program to attach.
- Once attach happend, the debugger creates a second temporary file to notify the launcher program that it has been attached, so that it can then exec. I'm using this instead of using a signal or a similar mechanism because I don't want the launcher program to wait indefinitely to be attached in case the debugger crashed. That would pollute the process list with a lot of hanging processes. Instead, I'm setting a 20 seconds timeout (that's an overkill) and the launcher program seeks in intervals the second tepmorary file.
Some notes:
- I preferred not to use sockets because it requires a lot of code and I only need a pid. It would also require a lot of code when windows support is implemented.
- I didn't add Windows support, as I don't have a windows machine, but adding support for it should be easy, as the FIFO file can be implemented with a named pipe, which is standard on Windows and works pretty much the same way.
The existing test which didn't pass on Linux, now passes.
Differential Revision: https://reviews.llvm.org/D93951
Implements the required functions on gdb-remote so the '--include-existing' flag of process attach works correctly on Linux.
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D94672
ObjCBOOLSummaryProvider was incorrectly treating BOOL as unsigned and this is now fixed.
Also adding tests for one bit bit-fields of BOOL and unsigned char.
lldb-vsdode was communicating the list of modules to the IDE with events, which in practice ended up having some drawbacks
- when debugging large targets, the number of these events were easily 10k, which polluted the messages being transmitted, which caused the following: a harder time debugging the messages, a lag after terminated the process because of these messages being processes (this could easily take several seconds). The latter was specially bad, as users were complaining about it even when they didn't check the modules view.
- these events were rarely used, as users only check the modules view when something is wrong and they try to debug things.
After getting some feedback from users, we realized that it's better to not used events but make this simply a request and is triggered by users whenever they needed.
This diff achieves that and does some small clean up in the existing code.
Differential Revision: https://reviews.llvm.org/D94033
The original patch got reverted as a dependency of cf1c774d6ace59c5adc9ab71b31e .
That patch got relanded so it's also necessary to reland this patch.
Original summary:
After cf1c774d6ace59c5adc9ab71b31e762c1be695b1, Clang seems to generate code
that is more similar to icc/Clang, so we can use the same line numbers for
all compilers in this test.
The DSYM variant of this test is failing since D94890. But as we explicitly
try to disable the DSYM generation in the makefile and build the archive on
our own, I don't see why we even need to run the DSYM version of the test.
This patch disables the generated derived versions of this test for the
different debug information containers (which includes the failing DSYM one).
Currently when LLDB has enough data in the debug information to import the `std` module,
it will just try to import it. However when debugging libraries where the sources aren't
available anymore, importing the module will generate a confusing diagnostic that
the module couldn't be built.
For the fallback mode (where we retry failed expressions with the loaded module), this
will cause the second expression to fail with a module built error instead of the
actual parsing issue in the user expression.
This patch adds checks that ensures that we at least have any source files in the found
include paths before we try to import the module. This prevents the module from being
loaded in the situation described above which means we don't emit the bogus 'can't
import module' diagnostic and also don't waste any time retrying the expression in the
fallback mode.
For the unit tests I did some refactoring as they now require a VFS with the files in it
and not just the paths. The Python test just builds a binary with a fake C++ module,
then deletes the module before debugging.
Fixes rdar://73264458
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D95096
Copy paste error, but the test still built on macOS. Weird.
It failed on debian linux with an error about -fno-limit-debug-info
not being a supported flag??? Not sure how this goof would cause
that error, but let's see if it did...
If they occurred before the constructor that used them, we would refuse to
set the breakpoint because we thought they were crossing function boundaries.
Differential Revision: https://reviews.llvm.org/D94846
This test is flakey on Windows and on failure it hangs causing the test suite to fail and future builds (on the buildbot, especially) to fail because they cannot re-write the files that are currently in use
This patch adds a new test case which depends on AArch64 SVE support and
dynamic resize capability enabled. It created two seperate threads which
have different values of sve registers and SVE vector granule at various
points during execution.
We test that LLDB is doing the size and offset updates properly for all
of the threads including the main thread and when we VG is updated using
prctl call or by 'register write vg' command the appropriate changes are
also update in register infos.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82866
The test couldn't find lldb-server as it's path was being overridden by
LLDB_DEBUGSERVER_PATH environment variable (pointing to debugserver).
This test should always use lldb-server, as it tests its platform
capabilities.
There's no need for the environment override, as lldb-server tests
should test the executable they just built, so I just remote the
override capability.
When a command option does not have a short version
(e.g. -f for --file), we use an arbitrary value in the
short_option field to mark it as invalid.
(though this value is unqiue to be used later for other
things)
We check that this short option is valid to print using
llvm::isPrint. This implicitly casts our int to char,
meaning we check the last char of any short_option value.
Since the arbitrary value we chose for these options is
some shortened hex version of the name, this returned true
even for invalid values.
Since llvm::isPrint returns true we later call std::islower
and/or std::isupper on the short_option value. (the int)
Calling these functions with something that cannot be validly
converted to unsigned char is undefined. Somehow we got/get
away with this but for me compiling with g++-9 I got a crash
for "help memory read".
The other command that uses this is "target variable" but that
didn't crash for unknown reasons.
Checking that short_option can fit into an unsigned char before
we call llvm::isPrint means we will not attempt to call islower/upper
on these options since we have no reason to print them.
This also fixes bogus short options being shown for "memory read"
and target variable.
For "target variable", before:
-e <filename> ( --file <filename> )
-b <filename> ( --shlib <filename> )
After:
--file <filename>
--shlib <filename>
(note that the bogus short options are just the bottom byte of our
arbitrary short_option value)
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D94917
The test was marked as remote-only, which means it was run ~never, and
accumulated various problems. This commit modifies the test to run
locally and includes a couple of other fixes necessary to make it run:
- moves the "invoke" method into the "Base" test class
- adds []'s around the IP address in a couple more places to make things
work with IPv6
The test is now marked as skipped when running the remote test suite. It
would be possible to make it run both locally and remotely, but this
would require writing a lot special logic for the remote case, and that
is not worth it.
This commit vAttachWait in lldb-server, so --waitfor can be used on
Linux
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D93895
The way this test is structured right now, I set a breakpoint on
the instruction before the __builtin_trap. It hits the breakpoint,
disables the breakpoint, and instruction steps. This hits the
builtin_trap instruction which debugserver (on arm64) now advances
to the next instruction and reports that address to lldb. lldb
doesn't recognize this as a proper response to the instruction
step and continues executing until the next trap, and the test fails.
