Although it is located under tools/lldb-server, this test is very
different that other lldb-server tests. The most important distinction
is that it does not test lldb-server directly, but rather interacts with
it through the lldb client. It also tests the relevant client
functionality (the platform connect command, which is even admitted in
the test name). The fact that this test is structured as a lldb-server
test means it cannot access most of the goodies available to the
"normal" lldb tests (the runCmd function, which it reimplements; the
run_break_set_by_symbol utility function; etc.).
This patch makes it a full-fledged lldb this, and rewrites the relevant
bits to make use of the standard features. I also move the test into the
"commands" subtree to better reflect its new status.
This test passes on arm64 (Apple Silicon). I assume that "aarch64" still
ensures this gets skipped on Linux. I don't have access to such and
environment so I'll have to rely on the bot complaining.
Convert `assertTrue(a == b)` to `assertEqual(a, b)` to produce better failure messages.
These were mostly done via regex search & replace, with some manual fixes.
Differential Revision: https://reviews.llvm.org/D95813
Identical to previous commits that just add a standard library template to the
supported template list and test it. Adding this rather obscure class to the
template list is mostly caused by the std::deque test unexpectedly referencing
this type when testing against newer libc++ versions on macOS.
Fixes TestQueueFromStdModule and TestQueueFromStdModule on macOS.
Fixes rdar://73213589
Currently when LLDB has enough data in the debug information to import the `std` module,
it will just try to import it. However when debugging libraries where the sources aren't
available anymore, importing the module will generate a confusing diagnostic that
the module couldn't be built.
For the fallback mode (where we retry failed expressions with the loaded module), this
will cause the second expression to fail with a module built error instead of the
actual parsing issue in the user expression.
This patch adds checks that ensures that we at least have any source files in the found
include paths before we try to import the module. This prevents the module from being
loaded in the situation described above which means we don't emit the bogus 'can't
import module' diagnostic and also don't waste any time retrying the expression in the
fallback mode.
For the unit tests I did some refactoring as they now require a VFS with the files in it
and not just the paths. The Python test just builds a binary with a fake C++ module,
then deletes the module before debugging.
Fixes rdar://73264458
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D95096
This test is flakey on Windows and on failure it hangs causing the test suite to fail and future builds (on the buildbot, especially) to fail because they cannot re-write the files that are currently in use
This patch adds a new test case which depends on AArch64 SVE support and
dynamic resize capability enabled. It created two seperate threads which
have different values of sve registers and SVE vector granule at various
points during execution.
We test that LLDB is doing the size and offset updates properly for all
of the threads including the main thread and when we VG is updated using
prctl call or by 'register write vg' command the appropriate changes are
also update in register infos.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82866
When a command option does not have a short version
(e.g. -f for --file), we use an arbitrary value in the
short_option field to mark it as invalid.
(though this value is unqiue to be used later for other
things)
We check that this short option is valid to print using
llvm::isPrint. This implicitly casts our int to char,
meaning we check the last char of any short_option value.
Since the arbitrary value we chose for these options is
some shortened hex version of the name, this returned true
even for invalid values.
Since llvm::isPrint returns true we later call std::islower
and/or std::isupper on the short_option value. (the int)
Calling these functions with something that cannot be validly
converted to unsigned char is undefined. Somehow we got/get
away with this but for me compiling with g++-9 I got a crash
for "help memory read".
The other command that uses this is "target variable" but that
didn't crash for unknown reasons.
Checking that short_option can fit into an unsigned char before
we call llvm::isPrint means we will not attempt to call islower/upper
on these options since we have no reason to print them.
This also fixes bogus short options being shown for "memory read"
and target variable.
For "target variable", before:
-e <filename> ( --file <filename> )
-b <filename> ( --shlib <filename> )
After:
--file <filename>
--shlib <filename>
(note that the bogus short options are just the bottom byte of our
arbitrary short_option value)
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D94917
Remove the stale LLDB-Info.plist which was only used by TestHelp.py. The
latter would try to parse the version number from the plist and use that
to verify the version in the help output. Of course this never matched
so it would fall back to matching any arbitrary version.
This patch does *not* change the real LLDB-Info.plist.in file which is
used for the LLDB Framework.
Add stN aliases for the FPU (stmmN) registers on MacOSX. This should
improve compatibility between MacOSX and other platforms, and partially
fix x86*-fp-write tests without having to duplicate them. Note that
the tests are currently still broken due to ftag incompatibility.
Differential Revision: https://reviews.llvm.org/D91847
Nearly all of our lldb-server tests have two flavours (lldb-server and
debugserver). Each of them is tagged with an appropriate decorator, and
each of them starts with a call to a matching "init" method. The init
calls are mandatory, and it's not possible to meaningfully combine them
with a different decorator.
This patch leverages the existing decorators to also tag the tests with
the appropriate debug server tag, similar to how we do with debug info
flavours. This allows us to make the "init" calls from inside the common
setUp method.
Fix the POSIX-DYLD plugin to update the cached executable path after
attaching. Previously, the path was cached in DYLDRendezvous
constructor and not updated afterwards. This meant that if LLDB was
attaching to a process (e.g. via connecting to lldb-server), the code
stored the empty path before DidAttach() resolved it. The fix updates
the cached path in DidAttach().
This fixes a new instance of https://llvm.org/pr17880
Differential Revision: https://reviews.llvm.org/D92264
Right now we have one large AST for all types in LLDB. All ODR violations in
types we reconstruct are resolved by just letting the ASTImporter handle the
conflicts (either by merging types or somehow trying to introduce a duplicated
declaration in the AST). This works ok for the normal types we build from debug
information as most of them are just simple CXXRecordDecls or empty template
declarations.
However, with a loaded `std` C++ module we have alternative versions of pretty
much all declarations in the `std` namespace that are much more fleshed out than
the debug information declarations. They have all the information that is lost
when converting to DWARF, such as default arguments, template default arguments,
the actual uninstantiated template declarations and so on.
When we merge these C++ module types into the big scratch AST (that might
already contain debug information types) we give the ASTImporter the tricky task
of somehow creating a consistent AST out of all these declarations. Usually this
ends in a messy AST that contains a mostly broken mix of both module and debug
info declarations. The ASTImporter in LLDB is also importing types with the
MinimalImport setting, which usually means the only information we have when
merging two types is often just the name of the declaration and the information
that it contains some child declarations. This makes it pretty much impossible
to even implement a better merging logic (as the names of C++ module
declarations and debug info declarations are identical).
This patch works around this whole merging problem by separating C++ module
types from debug information types. This is done by splitting up the single
scratch AST into two: One default AST for debug information and a dedicated AST
for C++ module types.
The C++ module AST is implemented as a 'specialised AST' that lives within the
default ScratchTypeSystemClang. When we select the scratch AST we can explicitly
request that we want such a isolated sub-AST of the scratch AST. I kept the
infrastructure more general as we probably can use the same mechanism for other
features that introduce conflicting types (such as programs that are compiled
with a custom -wchar-size= option).
There are just two places where we explicitly have request the C++ module AST:
When we export persistent declarations (`$mytype`) and when we create our
persistent result variable (`$0`, `$1`, ...). There are a few formatters that
were previously assuming that there is only one scratch AST which I cleaned up
in a preparation revision here (D92757).
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D92759
By now LLDB can import the 'std' C++ module to improve expression evaluation,
but there are still a few problems to solve before we can do this by default.
One is that importing the C++ module is slightly slower than normal expression
evaluation (mostly because the disk access and loading the initial lookup data
is quite slow in comparison to the barebone Clang setup the rest of the LLDB
expression evaluator is usually doing). Another problem is that some complicated
types in the standard library aren't fully supported yet by the ASTImporter, so
we end up types that fail to import (which usually appears to the user as if the
type is empty or there is just no result variable).
To still allow people to adopt this mode in their daily debugging, this patch
adds a setting that allows LLDB to automatically retry failed expression with a
loaded C++ module. All success expressions will behave exactly as they would do
before this patch. Failed expressions get a another parse attempt if we find a
usable C++ module in the current execution context. This way we shouldn't have
any performance/parsing regressions in normal debugging workflows, while the
debugging workflows involving STL containers benefit from the C++ module type
info.
This setting is off by default for now with the intention to enable it by
default on macOS soon-ish.
The implementation is mostly just extracting the existing parse logic into its
own function and then calling the parse function again if the first evaluation
failed and we have a C++ module to retry the parsing with.
Reviewed By: shafik, JDevlieghere, aprantl
Differential Revision: https://reviews.llvm.org/D92784
Force gdb-remote plugin when attaching using the derivatives
of PlatformPOSIX class. This is consistent with the behavior
for launching processes (via DebugProcess() method) and guarantees
consistent plugin choice on FreeBSD.
Differential Revision: https://reviews.llvm.org/D92667
Extract remote debugging logic from PlatformMacOSX and move it into
PlatformRemoteMacOSX so it can benefit from all the logic necessary for
remote debugging.
Until now, remote macOS debugging was treated almost identical to local
macOS debugging. By moving in into its own class, we can have it inherit
from PlatformRemoteDarwinDevice and all the functionality it provides,
such as looking at the correct DeviceSupport directory.
rdar://68167374
Differential revision: https://reviews.llvm.org/D92452
The test case isn't using the AST matchers for all checks as there doesn't seem to be support for
matching TemplateTypeParmDecl default arguments. Otherwise this is simply importing the
default arguments.
Also updates several LLDB tests that now as intended omit the default template
arguments of several std templates.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D92103
Restore Linux-alike regset names for AVX/MPX registers
as TestLldbGdbServer seems to depend on them. At the same time, fix
TestRegisters to be aware that they are not available on FreeBSD
and NetBSD, at least until we figure out a better way of reporting
unsupported register sets.
Differential Revision: https://reviews.llvm.org/D91923
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
The Shell/Register tests now rely on the new behavior, and therefore
are run on non-Darwin systems only. The Python (API) test relies
on the legacy behavior, and is run on Darwin only.
Differential Revision: https://reviews.llvm.org/D91504
We can handle all the types in the expression evaluator now without casting.
On Linux, we have a system header declaration that is still causing issues, so
I'm skipping the test there until I get around to fix this.
Depends on D90490.
The stop command is simple and invokes the new method Trace::StopTracingThread(thread).
On the other hand, the start command works by delegating its implementation to a CommandObject provided by the Trace plugin. This is necessary because each trace plugin needs different options for this command. There's even the chance that a Trace plugin can't support live tracing, but instead supports offline decoding and analysis, which means that "thread trace dump instructions" works but "thread trace start" doest. Because of this and a few other reasons, it's better to have each plugin provide this implementation.
Besides, I'm using the GetSupportedTraceType method introduced in D90490 to quickly infer what's the trace plug-in that works for the current process.
As an implementation note, I moved CommandObjectIterateOverThreads to its header so that I can use it from the IntelPT plugin. Besides, the actual start and stop logic for intel-pt is not part of this diff.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D90729
init_llgs_test no longer takes an argument
but these two were not updated.
Also fix some mistakes in TestAutoInstallMainExecutable
to get it passing again.
Reviewed By: JDevlieghere, labath
Differential Revision: https://reviews.llvm.org/D91612
"[lldb/DataFormatters] Display null C++ pointers as nullptr" added an assumption
that the member we check for is always a nullptr, but it is actually never
initialized. That causes the test to randomly fail due to the pointer having
some random value that isn't 0.
Display null pointer as `nullptr`, `nil` and `NULL` for C++,
Objective-C/Objective-C++ and C respectively. The original motivation
for this patch was to display a null std::string pointer as nullptr
instead of "", but the fix seemed generic enough to be done for all
summary providers.
Differential revision: https://reviews.llvm.org/D77153
This adds `expect_var_path` to test variable paths so we no longer have to
use `frame var` and find substrs in the command output. The behaviour
is identical with `expect_expr` (and it also uses the same checking backend),
but it instead calls `GetValueForVariablePath` to evaluate the string as a variable
path.
Also rewrites a few of the tests that previously used `frame variable` to use
`expect_var_path`.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D90450
Those two decorators have identical behaviour. This removes
`not_remote_testsuite_ready` as `skipIfRemote` seems more consistent with the
other decorator names we have
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89376
Copy the recent improvements from the FreeBSDRemote plugin, notably:
- moving event reporting setup into SetupTrace() helper
- adding more debug info into SIGTRAP handling
- handling user-generated (and unknown) SIGTRAP events
- adding missing error handling to the generic signal handler
- fixing attaching to processes
- switching watchpoint helpers to use llvm::Error
- minor style and formatting changes
This fixes a number of tests, mostly related to fixed attaching.
Differential Revision: https://reviews.llvm.org/D91167
Explicitly copy dbregs to new threads to ensure that watchpoints
are propagated properly. Fixes the test failure due to apparent kernel
race between reporting a new thread and resuming main thread execution
that makes implicit inheritance of dbregs unreliable. By copying them
explicitly, we ensure that the new thread correctly respects watchpoints
that were set after the thread was created but before it was reported.
The code is copied from the NetBSD plugin and modernized to use
llvm::Error.
Differential Revision: https://reviews.llvm.org/D91032
Make category-specifying files visible. There is really no good reason
to keep them hidden, and having them visible increases the chances
that someone will actually spot them.
Differential Revision: https://reviews.llvm.org/D91065
Replace the plethora of ObjC-implied 'skipUnlessDarwin' decorators
with marking tests as 'objc' category (whenever missing), and skip all
ObjC tests on non-Darwin platforms. I have used '.categories' file
wherever it was present already or all (>1) tests were relying on ObjC,
and explicit add_test_categories() where there was only one test.
Differential Revision: https://reviews.llvm.org/D91056
When LLDB Python bindings are used and stack backtraces are enabled
for logging, getMainExecutable() is called with argv0 being null.
This caused the fallback function getprogpath() (used on FreeBSD, NetBSD
and Linux) to segfault. Make it handle null executable name gracefully.
Differential Revision: https://reviews.llvm.org/D91012
TestWatchpointMultipleThreads currently accounts for two scenarios:
setting the watchpoint before a new thread starts (presumably, verifying
that it will be propagated to the new thread) and setting it after
the thread starts (presumably, verifying that a new watchpoint is set
on all threads). However, the latter test currently assumes that
the thread will be reported to the debugger before the breakpoint is
hit. This is not the case on FreeBSD and NetBSD.
On NetBSD, new threads do not inherit debug registers from their parent
threads. Instead, LLDB copies them manually after the new thread is
reported. Since the thread is actually reported after the second
breakpoint location, both tests effectively check the same behavior
(i.e. watchpoint being set before the new thread is reported).
On FreeBSD, new threads inherit debug registers and we seem to hit
an interesting race condition. While the thread is reported after
the breakpoint is hit, the kernel seems to construct it and copy
the debug register before that happens. As a result, setting
the watchpoint at the second breakpoint location modifies the debug
registers of the first thread after they have been copied to the second
thread but before the debugger is aware of it. Therefore,
the watchpoint is not propagated to the second thread and the test
fails.
Extend the test to cover all three possible scenarios: setting
watchpoint before the thread is lanched, after it is launched but before
it is guaranteed to have started and after it has actually started. Add
a second barrier to account for the last case. This should ensure that
the second assumption (i.e. that the watchpoint is set on all currently
known threads) is actually tested on FreeBSD and NetBSD.
Differential Revision: https://reviews.llvm.org/D91030
Depends on D89408.
This diff finally implements trace decoding!
The current interface is
$ trace load /path/to/trace/session/file.json
$ thread trace dump instructions
thread #1: tid = 3842849, total instructions = 22
[ 0] 0x40052d
[ 1] 0x40052d
...
[19] 0x400521
$ # simply enter, which is a repeat command
[20] 0x40052d
[21] 0x400529
...
This doesn't do any disassembly, which will be done in the next diff.
Changes:
- Added an IntelPTDecoder class, that is a wrapper for libipt, which is the actual library that performs the decoding.
- Added TraceThreadDecoder class that decodes traces and memoizes the result to avoid repeating the decoding step.
- Added a DecodedThread class, which represents the output from decoding and that for the time being only stores the list of reconstructed instructions. Later it'll contain the function call hierarchy, which will enable reconstructing backtraces.
- Added basic APIs for accessing the trace in Trace.h:
- GetInstructionCount, which counts the number of instructions traced for a given thread
- IsTraceFailed, which returns an Error if decoding a thread failed
- ForEachInstruction, which iterates on the instructions traced for a given thread, concealing the internal storage of threads, as plug-ins can decide to generate the instructions on the fly or to store them all in a vector, like I do.
- DumpTraceInstructions was updated to print the instructions or show an error message if decoding was impossible.
- Tests included
Differential Revision: https://reviews.llvm.org/D89283
The new FreeBSDRemote plugin has reached feature parity on i386
and amd64 targets. Use it by default on these architectures, while
allowing the use of the legacy plugin via FREEBSD_LEGACY_PLUGIN envvar.
Revisit the method of switching plugins. Apparently, the return value
of PlatformFreeBSD::CanDebugProcess() is what really decides whether
the legacy or the new plugin is used.
Update the test status. Reenable the tests that were previously
disabled on FreeBSD and do not cause hangs or are irrelevant to FreeBSD.
Mark all tests that fail reliably as expectedFailure. For now, tests
that are flaky (i.e. produce unstable results) are left enabled
and cause unpredictable test failures.
Differential Revision: https://reviews.llvm.org/D90757
Replace the inline x86 watchpoint handling code with the reusable
NativeRegisterContextWatchpoint_x86. Implement watchpoint support
in NativeThreadFreeBSD and SIGTRAP handling for watchpoints.
Un-skip all concurrent_events tests as they pass with the new plugin.
Differential Revision: https://reviews.llvm.org/D90102
TestQuoting's different test methods all build their own test binaries but
we can just reuse the same test binary by merging all asserts into one method.
This reduces the test runtime from 8 seconds to 4 seconds on my machine.
This also removes the ability to have partial failures in this test, but given
how rarely this code is touched this seems like a fair tradeoff (and we will be
able to re-add this feature once we updated our test framework).
Some other small changes:
* Fixed that we cleanup "stdout.txt" instead of "output.txt" in the cleanup.
* Fixed some formatting issues.
* Call `build` instead of directly calling `buildDefault`.
