D95354 started to set the sh_link field for SHT_SYMTAB sections.
Previously it was set for symbol tables basing on their names (e.g. ".symtab").
This test now crashes see:
http://lab.llvm.org:8011/#/builders/68/builds/5911
I updated it to restore the old behavior.
Adds support for running a Lua function when a breakpoint is hit.
Example:
breakpoint command add -s lua -F abc
The above runs the Lua function 'abc' passing 2 arguments. 'frame', 'bp_loc' and 'extra_args'.
A third parameter 'extra_args' is only present when there is structured data
declared in the command line.
Example:
breakpoint command add -s lua -F abc -k foo -v bar
Differential Revision: https://reviews.llvm.org/D93649
Finishing out the support (to the best of my knowledge/based on current
testing running the whole check-lldb with a clang forcibly using
DW_AT_ranges on all DW_TAG_subprograms) for this feature.
Differential Revision: https://reviews.llvm.org/D94064
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
Adds the RISC-V ArchSpec bits contributed by @simoncook as part of D62732,
plus logic to distinguish between riscv32 and riscv64 based on ELF class.
The patch follows the implementation approach previously used for MIPS.
It defines RISC-V architecture subtypes and inspects the ELF header,
namely the ELF class, to detect the right subtype.
Differential Revision: https://reviews.llvm.org/D86292
gcc already produces debug info with this form
-freorder-block-and-partition
clang produces this sort of thing with -fbasic-block-sections and with a
coming-soon tweak to use ranges in DWARFv5 where they can allow greater
reuse of debug_addr than the low/high_pc forms.
This fixes the case of breaking on a function name, but leaves broken
printing a variable - a follow-up commit will add that and improve the
test case to match.
Differential Revision: https://reviews.llvm.org/D94063
Add stN aliases for the FPU (stmmN) registers on MacOSX. This should
improve compatibility between MacOSX and other platforms, and partially
fix x86*-fp-write tests without having to duplicate them. Note that
the tests are currently still broken due to ftag incompatibility.
Differential Revision: https://reviews.llvm.org/D91847
1 - Partial Statements
The interpreter loop runs every line it receives, so partial
Lua statements are not being handled properly. This is a problem for
multiline breakpoint scripts since the interpreter loop, for this
particular case, is just an abstraction to a partially parsed function
body declaration.
This patch addresses this issue and as a side effect improves the
general Lua interpreter loop as well. It's now possible to write partial
statements in the 'script' command.
Example:
(lldb) script
>>> do
..> local a = 123
..> print(a)
..> end
123
The technique implemented is the same as the one employed by Lua's own REPL implementation.
Partial statements always errors out with the '<eof>' tag in the error
message.
2 - CheckSyntax in Lua.h
In order to support (1), we need an API for just checking the syntax of string buffers.
3 - Multiline scripted breakpoints
Finally, with all the base features implemented this feature is
straightforward. The interpreter loop behaves exactly the same, the
difference is that it will aggregate all Lua statements into the body of
the breakpoint function. An explicit 'quit' statement is needed to exit the
interpreter loop.
Example:
(lldb) breakpoint command add -s lua
Enter your Lua command(s). Type 'quit' to end.
The commands are compiled as the body of the following Lua function
function (frame, bp_loc, ...) end
..> print(456)
..> a = 123
..> quit
Differential Revision: https://reviews.llvm.org/D93481
In split DWARF v5 files, the DWO id is no longer in the DW_AT_GNU_dwo_id
attribute. It's in the CU header instead. This change makes lldb look in
both places.
Differential Revision: https://reviews.llvm.org/D93444
Explicitly consider the libraries reported on the initial rendezvous
breakpoint hit added. This is necessary on FreeBSD since the dynamic
loader issues only a single 'consistent' state rendezvous breakpoint hit
for all the libraries present in DT_NEEDED. It is also helpful on Linux
where it ensures that ld-linux is considered loaded as well
as the shared system libraries reported afterwards.
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
LLDB is supposed to ask the Clang Driver what the default module cache path is
and then use that value as the default for the
`symbols.clang-modules-cache-path` setting. However, we use the property type
`String` to change `symbols.clang-modules-cache-path` even though the type of
that setting is `FileSpec`, so the setter will simply do nothing and return
`false`. We also don't check the return value of the setter, so this whole code
ends up not doing anything at all.
This changes the setter to use the correct property type and adds an assert that
we actually successfully set the default path. Also adds a test that checks that
the default value for this setting is never unset/empty path as this would
effectively disable the import-std-module feature from working by default.
Reviewed By: JDevlieghere, shafik
Differential Revision: https://reviews.llvm.org/D92772
Kill (rather than detach) form the inferior if debugserver loses its
connection to lldb to prevent zombie processes.
Differential revision: https://reviews.llvm.org/D92908
This reverts commit 09b08833f301ea375137931d26b7193101f82ceb.
This code is wrong on Linux, and causes ld-linux and linux-vdso to be
reported twice. I need to work on it more.
LLDB is ignoring compilation errors for one-line breakpoint scripts.
This patch fixes the issues and now the error message of the
ScriptInterpreter is shown to the user.
I had to remove a new-line character for the Lua interpreter since it
was duplicated.
Differential Revision: https://reviews.llvm.org/D92729
Explicitly consider the libraries reported on the initial eTakeSnapshot
action added, through adding them to the added soentry list
in DYLDRendezvous::SaveSOEntriesFromRemote(). This is necessary
on FreeBSD since the dynamic loader issues only a single 'consistent'
state rendezvous breakpoint hit for all the libraries present
in DT_NEEDED (while Linux issues an added-consistent event pair).
Reenable memory maps on FreeBSD since this fixed the issue triggered
by them.
Differential Revision: https://reviews.llvm.org/D92187
The code that gets the ScriptInterpreter was not considering the
case that it receives a Lua interpreter.
Differential Revision: https://reviews.llvm.org/D92249
This reverts commit cf1c774d6ace59c5adc9ab71b31e762c1be695b1.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694d32efa44242c099e923a7f4d982095.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30edccd9e175d92bddeefcfa544751b2.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf17a7dca0874ace7490cc3836fb063f.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee89dadb8798ca8ed19848f33f4551d5.
These callbacks are set using the following:
breakpoint command add -s lua -o "print('hello world!')"
The user supplied script is executed as:
function (frame, bp_loc, ...)
<body>
end
So the local variables 'frame', 'bp_loc' and vararg are all accessible.
Any global variables declared will persist in the Lua interpreter.
A user should never hold 'frame' and 'bp_loc' in a global variable as
these userdatas are context dependent.
Differential Revision: https://reviews.llvm.org/D91508
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
Add a 'can_connect' parameter to Process plugin initialization, and use
it to filter plugins to these capable of remote connections. This is
used to prevent 'process connect' from picking up a plugin that can only
be used locally, e.g. the legacy FreeBSD plugin.
Differential Revision: https://reviews.llvm.org/D91810
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
The Shell/Register tests now rely on the new behavior, and therefore
are run on non-Darwin systems only. The Python (API) test relies
on the legacy behavior, and is run on Darwin only.
Differential Revision: https://reviews.llvm.org/D91504
D91497 changed lldb/test/Shell/Register/x86-fp-write.test and added target-x86_64 to the REQUIRES clause.
It looks this test does not pass on this platform so removing it since it one of tests failing on the
green dragon build bot.
This reverts commit c43abf043692babf9ad4f8bded2fdf6ab9c354b0.
Test commands/register/register/register_command/TestRegisters.py fails.
Buildbot http://lab.llvm.org:8011/#/changes/4149
Translate between abridged and full ftag values in order to expose
the latter in the gdb-remote protocol while the former are used by
FXSAVE/XSAVE... This matches the gdb behavior.
Differential Revision: https://reviews.llvm.org/D91504
The FXSAVE/XSAVE data can have two different layouts on x86_64. When
called as FXSAVE/XSAVE..., the Instruction Pointer and Address Pointer
registers are reported using a 16-bit segment identifier and a 32-bit
offset. When called as FXSAVE64/XSAVE64..., they are reported using
a complete 64-bit offsets instead.
LLDB has historically followed GDB and unconditionally used to assume
the 32-bit layout, with the slight modification of possibly
using a 32-bit segment register (i.e. extending the register into
the reserved 16 upper bits). When the underlying operating system used
FXSAVE64/XSAVE64..., the pointer was split into two halves,
with the upper half repored as the segment registers. While
reconstructing the full address was possible on the user end (and e.g.
the FPU register tests did that), it certainly was not the most
convenient option.
Introduce a two additional 'fip' and 'fdp' registers that overlap
with 'fiseg'/'fioff' and 'foseg'/'foff' respectively, and report
the complete 64-bit address.
Differential Revision: https://reviews.llvm.org/D91497
Add a parser for JSON crashlogs. The CrashLogParser now defers to either
the JSONCrashLogParser or the TextCrashLogParser. It first tries to
interpret the input as JSON, and if that fails falling back to the
textual parser.
Differential revision: https://reviews.llvm.org/D91130
I think the check for whether the process is connected is totally bogus
in the first place, but on the off-chance that's it's not, we should
behave the same in synchronous and asynchronous mode.
When I added TestAbortExitCode I actually planned this to be a generic test for the
exit code functionality on POSIX systems. However due to all the different test setups we
can have I don't think this worked out. Right now the test had to be made so permissive
that it pretty much can't fail.
Just to summarize, we would need to support the following situations:
1. ToT debugserver (on macOS)
2. lldb-server (on other platforms)
3. Any old debugserver version when using the system debugserver (on macOS)
This patch is removing TestAbortExitCode and adds a ToT debugserver specific test
that checks the patch that motivated the whole exit code testing. There is already
an exit-code test for lldb-server from what I can see and 3) is pretty much untestable
as we don't know anything about the system debugserver.
Reviewed By: kastiglione
Differential Revision: https://reviews.llvm.org/D89305
