Function `replaceMathCmpWithIntrinsic` artificially limits the scope
of the optimization, setting a requirement of two instructions be in
the same block, due to two reasons:
- usage of DT for more general check is costly in terms of compile time;
- risk of creating a new value that lives through multiple blocks.
Because of this, two semantically equivalent tests may be or not be the
subject of this opt depending on where the binary operation is located.
See `test/CodeGen/X86/usub_inc_iv.ll` for motivation
There is one important particular case where this limitation is too strict:
it is when the binary operation is the increment of the induction variable.
As result, the application of this opt becomes fragile and highly reliant on
where other passes decide to place IV increment. In most cases, they place
it in the end of the latch block, killing the opt opportunity (when in fact it
does not matter where to insert the actual instruction).
This patch handles this particular case separately.
- The detector does not use dom tree and has constant cost;
- The value of IV or IV.next lives through all loop in any case, so this should not
create a new unexpected long-living value.
As result, the transform becomes more robust. It also seems to lead to
better code generation in some cases (see `test/CodeGen/X86/lsr-loop-exit-cond.ll`).
Differential Revision: https://reviews.llvm.org/D96119
Reviewed By: spatel, reames
Add mimgopc object to represent the opcode allowing different
opcodes for different hardware variants.
This enables image_atomic_fcmpswap, image_atomic_fmin, and
image_atomic_fmax on GFX10
Reviewed By: foad, rampitec
Differential Revision: https://reviews.llvm.org/D96309
This removes the commuted PatFrags that only existed to carry
an SDNodeXForm in its OperandTransform field. We know all the places
that need to use the commuted SDNodeXForm and there is one transform
shared by signed and unsigned compares. So just hardcode the
the SDNodeXForm where it is needed and use the non commuted PatFrag
in the pattern.
I think when I wrote this I thought the SDNodeXForm name had to
match what is in the PatFrag that is being used. But that's not
true. The OperandTransform is only used when the PatFrag is used
in an instruction pattern and not a separate Pat pattern. All
the commuted cases are Pat patterns.
Rename the `RF_MoveDistinctMDs` flag passed into `MapValue` and
`MapMetadata` to `RF_ReuseAndMutateDistinctMDs` in order to more
precisely describe its effect and clarify the header documentation.
Found this while helping to investigate PR48841, which pointed out an
unsound use of the flag in `CloneModule()`. For now I've just added a
FIXME there, but I'm hopeful that the new (more precise) name will
prevent other similar errors.
A G_MUL + G_PTR_ADD can also be folded into a madd. So, conservatively, we
shouldn't combine when the G_MUL is used by a G_PTR_ADD either.
Differential Revision: https://reviews.llvm.org/D96457
GlobalISel was only doing this with minsize. SDAG does this with optsize.
(See: `SelectionDAG::shouldOptForSize()`)
This is a 0.3% code size improvement for CTMark at -Os.
(Best: 1.1% improvements on lencod + pairlocalalign)
Differential Revision: https://reviews.llvm.org/D96451
Break SampleProfileLoader into to a base and a derived class.
Base class (SampleProfileLoaderBaseImpl) includes the common
code for IR and MachineIR (CodeGen) sample loader.
It will be templatelized in the later patch.
Inline and Probe related code will remain in the derived class of
SampleProfileLoader and stays in SampleProfile.cpp.
We need to refactor some functions:
(1) getInstWeight() to enable the code sharing -- put the core into
getInstWeightImpl().
(2) emitAnnotation() and propagateWeights() to carve out the code
specific to SampleProfileLoader.
(3) make getInstWeight() and findFunctionSamples() virtual and override
in SampleProfileLoader as they need to access the fields in the derived
class.
Differential Revision: https://reviews.llvm.org/D95832
When we have a G_ADD which is fed by a G_ICMP on one side, we can fold it into
the cset for the G_ICMP.
e.g. Given
```
%cmp = G_ICMP ... %x, %y
%add = G_ADD %cmp, %z
```
We would normally emit a cmp, cset, and add.
However, `%add` is either `%z` or `%z + 1`. So, we can just use `%z` as the
source of the cset rather than wzr, saving an instruction.
This would probably be cleaner in AArch64PostLegalizerLowering, but we'd need
to change the way we represent G_ICMP to do that, I think. For now, it's
easiest to implement in selection.
This is a 0.1% code size improvement on CTMark/pairlocalalign at -Os.
Example: https://godbolt.org/z/7KdrP8
Differential Revision: https://reviews.llvm.org/D96388
If context is enabled/disabled and queried concurrently then this
results in a data race/TSAN failure with RunSafely (where boolean
variable was not locked).
There doesn't seem to be a reasonable way to enable threads that enable
and disable recovery in parallel (without also keeping
gCrashRecoveryEnabled's lock held during Fn execution which seems
undesirable). This makes enable checking if enabled thread local and
consistent with other thread local usage of crash context here.
Differential Revision: https://reviews.llvm.org/D93907
The IR/MIR pseudo probe intrinsics don't get materialized into real machine instructions and therefore they don't incur runtime cost directly. However, they come with indirect cost by blocking certain optimizations. Some of the blocking are intentional (such as blocking code merge) for better counts quality while the others are accidental. This change unblocks perf-critical optimizations that do not affect counts quality. They include:
1. IR InstCombine, sinking load operation to shorten lifetimes.
2. MIR LiveRangeShrink, similar to #1
3. MIR TwoAddressInstructionPass, i.e, opeq transform
4. MIR function argument copy elision
5. IR stack protection. (though not perf-critical but nice to have).
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95982
The AssumptionCache mechanism is used to feed assumes into known bits computations. Most places in SCEV passed it in, but one place appears to have been missed.
Spotted via inspection, don't have a test case which actually exercises this, but it seemed like an obvious fixit.
This is a special-case multiply that replicates bits of
the source operand. We need this fold to avoid regression
if we make canonicalization to `mul` more aggressive for
shl+or patterns.
I did not see a way to make Alive generalize the bit width
condition for even-number-of-bits only, but an example of
the proof is:
Name: i32
Pre: isPowerOf2(C1 - 1) && log2(C1) == C2 && (C2 * 2 == width(C2))
%m = mul nuw i32 %x, C1
%t = lshr i32 %m, C2
=>
%t = and i32 %x, C1 - 2
Name: i14
%m = mul nuw i14 %x, 129
%t = lshr i14 %m, 7
=>
%t = and i14 %x, 127
https://rise4fun.com/Alive/e52
It seems nicer to list passes given a flag rather than displaying all
passes in opt --help.
This is awkwardly structured because a PassBuilder is required, but
reusing the PassBuilder in runPassPipeline() doesn't work because we
read the input IR before getting to runPassPipeline(). So printing the
list of passes needs to happen before reading the input IR. If we remove
the legacy PM code in main() and move everything from NewPMDriver.cpp
into opt.cpp, we can create the PassBuilder before reading IR and check
if we should print the list of passes and exit. But until then this hack
seems fine.
Compared to the legacy PM, the new PM passes are lacking descriptions.
We'll need to figure out a way to add descriptions if we think this is
important.
Also, this only works for passes specified in PassRegistry.def. If we
want to print other custom registered passes, we'll need a different
mechanism.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D96101
This is used by the Linux kernel built with CONFIG_THUMB2_KERNEL.
Because different operands are not permitted to `movs`, the diagnostics now provide multiple suggestions along the lines of using a non-pc destination operand or lr source operand.
Forked from D95586.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D96304
The test cases extract a fixed element from a vector and splat it
into a vector. This gets DAG combined into a splat shuffle.
I've used some very wide vectors in the test to make sure we have
at least a couple tests where the element doesn't fit into the
uimm5 immediate of vrgather.vi so we fall back to vrgather.vx.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D96186
The ELF spec says:
> STT_FILE: Conventionally, the symbol's name gives the name of the source file associated with the object file. A file symbol has STB_LOCAL binding, its section index is SHN_ABS, and it precedes the other STB_LOCAL symbols for the file, if it is present.
For a local symbol, the preceding STT_FILE symbol is almost always in the same
file[1]. GNU addr2line uses this heuristic to retrieve the filename associated
with a local symbol (e.g. internal linkage functions in C/C++).
GNU addr2line can assign STT_FILE filename to a non-local symbol, too, but the trick
only works if no regular symbol precede STT_FILE. This patch does not implement this corner case
(not useful for most executables which have more than one files).
In case of filename mismatch between .debug_line & .symtab, arbitrarily make .debug_line win.
[1]: LLD does not synthesize STT_FILE symbols
(https://bugs.llvm.org/show_bug.cgi?id=48023 see also
https://sourceware.org/bugzilla/show_bug.cgi?id=26822). An assembly file
without `.file` directives can cause mis-attribution. This is an edge case.
Differential Revision: https://reviews.llvm.org/D95927
Originally landed in ddc2f1e3fb4 and reverted in d32deaab4d because of
a Generic test objecting. That was fixed up in 013613964fd9. Original
landing commit message follows:
[DWARF] Location-less inlined variables should not have DW_TAG_variable
Discussed in this thread:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/148139.html
DwarfDebug::collectEntityInfo accidentally distinguishes between variable
locations that never have a location specified, and variable locations that
have an empty location specified. The latter leads to the creation of an
empty variable referring to the abstract origin.
Fix this by seeking a non-empty location before producing a concrete
entity, to guarantee a DW_AT_location will be produced. Other loops in
collectEntityInfo and endFunctionImpl take care of examining the
retainedNodes collection and ensuring optimised-out variables are created.
Differential Revision: https://reviews.llvm.org/D95617
Avoid doing the following combine for vector types:
```
copysign(x, fp_extend(y)) -> copysign(x, y)
copysign(x, fp_round(y)) -> copysign(x, y)
```
That combine seemed to impede the selection of vector instruction and cause
a mess in some circumstances.
Differential Revision: https://reviews.llvm.org/D96037
Allow assembler expressions to start with an identifier. This allows for expressions such as
```
b symbol + 4
```
and
```
mov symEnd - symStart, %g1
```
The patch builds upon https://reviews.llvm.org/D47136.
Reviewed By: joerg
Differential Revision: https://reviews.llvm.org/D47458
This patch optimizes a build_vector "index sequence" and lowers it to
the existing custom RISCVISD::VID node. This pattern is common in
autovectorized code.
The custom node was updated to allow it to be used by both scalable and
fixed-length vectors, thus avoiding pattern duplication.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D96332
This patch is NFC and changes occurrences of `unsigned MaxVectorSize`
to work on type ElementCount.
This patch is a preparatory patch with the ultimate goal of making
`computeMaxVF()` return both a max fixed VF and a max scalable VF,
so that `selectVectorizationFactor()` can pick the most cost-effective
vectorization factor.
Reviewed By: kmclaughlin
Differential Revision: https://reviews.llvm.org/D96018
Enable partial and runtime unrolling with a threshold of 30, which
was derived from a large number of kernels running on node and
wasmtime for amd64 and aarch64.
Unrolling is enabled by default at -O2 and -O3 and is disabled at
-Oz and -Os. Compiling with -Os is recommended if the wasm binary
size is the most important factor.
Differential Revision: https://reviews.llvm.org/D95125
Similar to the case for G_ADD.
There was a function in CTMark/pairlocalalign which was missing this case,
causing GlobalISel to emit a add + csel when a csinc is all that is necessary.
https://godbolt.org/z/ax69E9
Minor code size improvements on CTMark at -Os.
Differential Revision: https://reviews.llvm.org/D96390
glibc deprecates `mallinfo` in the latest version of 2.33. This patch replaces the usage of `mallinfo` with the new `mallinfo2` when it's available.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D96359
VP blocks keep track of a condition, which is a VPValue. This patch
updates VPBlockBase to manage the value using VPUser, so
replaceAllUsesWith properly updates the condition bit as well.
This is required to enable VP2VP transformations and it helps with
simplifying some of the code required to manage condition bits.
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D95382
We implement getHostCPUName() for AIX via systemcfg interfaces since access to the processor version register is a privileged operation. We return a value based on the current processor implementation mode.
This fixes the cpu detection used by clang for `-mcpu=native`.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D95966
This allows data sections that don't start with `.data` to be
used/created.
Without this, clang's `__attribute__((section("foo")))` would
generate assembly that would not parse.
Differential Revision: https://reviews.llvm.org/D96233
This was reported as PR49104. The reproducer uses varargs but the issue
is the same, we know an argument is dead but can't change the signature
for some reason. The PR49104 situation was: We are in an CG-SCC
traversal and we remove all the uses of an argument and proof it thereby
dead. However, if we do not remove the argument, via signature rewrite,
we need to ensure that the `undef` we introduce at the call site doesn't
clash with a `noundef` attribute.
The patch only plumbs through the option necessary for targeting sm_86 GPUs w/o
adding any new functionality.
Differential Revision: https://reviews.llvm.org/D95974
We need to avoid setting the kill flag on the CSR spill if there's an
additional use of the register after the spill.
This does rely on consistency between the entry block liveins and the
MRI's function live ins, which is not something the verifier checks
now.
This was taking the calling convention from the parent function,
instead of the callee. Avoids regressions in a future patch when the
caller and callee have different type breakdowns.
For some reason AArch64's lowerFormalArguments seems to intentionally
ignore the parent isVarArg.
