These two tests are operating on the same test suite, which causes
them to be racy about writing temporary files and can cause spurious
failures. Merge them into one test to avoid the issue.
llvm-svn: 337718
Summary:
OpChain has subclasses, so add a virtual destructor.
This fixes an issue when deleting subclasses of OpChain (see MatchSMLAD() specifically) in r337701.
Reviewers: javed.absar
Subscribers: llvm-commits, SjoerdMeijer, samparker
Differential Revision: https://reviews.llvm.org/D49681
llvm-svn: 337713
In preparing to allow ARMParallelDSP pass to parallelise more than
smlads, I've restructed some elements:
- The ParallelMAC struct has been renamed to BinOpChain.
- The BinOpChain struct holds two value lists: LHS and RHS, as well
as inheriting from the OpChain base class.
- The OpChain struct holds all the values of the represented chain
and has had the memory locations functionality inserted into it.
- ParallelMACList becomes OpChainList and it now holds pointers
instead of objects.
Differential Revision: https://reviews.llvm.org/D49020
llvm-svn: 337701
Two minor issues: The new MCD SchedWrite name does not contain "Unit" like
all the others, so a check is needed. Also, print "LSU" instead of "LS".
Review: Ulrich Weigand
llvm-svn: 337700
Arm specific codegen prepare is implemented to perform type promotion
on icmp operands, which can enable the removal of uxtb and uxth
(unsigned extend) instructions. This is possible because performing
type promotion before ISel alleviates this duty from the DAG builder
which has to perform legalisation, but has a limited view on data
ranges.
The pass visits any instruction operand of an icmp and creates a
worklist to traverse the use-def tree to determine whether the values
can simply be promoted. Our concern is values in the registers
overflowing the narrow (i8, i16) data range, so instructions marked
with nuw can be promoted easily. For add and sub instructions, we are
able to use the parallel dsp instructions to operate on scalar data
types and avoid overflowing bits. Underflowing adds and subs are also
permitted when the result is only used by an unsigned icmp.
Differential Revision: https://reviews.llvm.org/D48832
llvm-svn: 337687
In ConstructSSAForLoadSet if an available value is actually the load that we're
doing SSA construction to eliminate, then we can omit it as SSAUpdate will add
in the value for the phi that will be replacing it anyway. This can result in
simpler IR which can allow further optimisation.
Differential Revision: https://reviews.llvm.org/D44160
llvm-svn: 337686
Bug fix for PR37445. The underlying problem and its fix are similar to PR37808.
The bug lies in MemorySSAUpdater::getPreviousDefRecursive(), where PhiOps is
computed before the call to tryRemoveTrivialPhi() and it ends up being out of
date, pointing to stale data. We have now turned each of the PhiOps into a
TrackingVH<MemoryAccess>.
Differential Revision: https://reviews.llvm.org/D49425
llvm-svn: 337680
Summary:
Pretty mechanical follow-up for D49196.
As microarchitecture.pdf notes, "20 AMD Ryzen pipeline",
"20.8 Register renaming and out-of-order schedulers":
The integer register file has 168 physical registers of 64 bits each.
The floating point register file has 160 registers of 128 bits each.
"20.14 Partial register access":
The processor always keeps the different parts of an integer register together.
...
An instruction that writes to part of a register will therefore have a false dependence
on any previous write to the same register or any part of it.
Reviewers: andreadb, courbet, RKSimon, craig.topper, GGanesh
Reviewed By: GGanesh
Subscribers: gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D49393
llvm-svn: 337676
Bug fix for PR36787. When reasoning if it's safe to hoist a load we
want to make sure that the defining memory access dominates the new
insertion point of the hoisted instruction. safeToHoistLdSt calls
firstInBB(InsertionPoint,DefiningAccess) which returns false if
InsertionPoint == DefiningAccess, and therefore it falsely thinks
it's safe to hoist.
Differential Revision: https://reviews.llvm.org/D49555
llvm-svn: 337674
a call, and then again as a return.
Also added a comment to try and explain better why we would be doing
what we're doing when hardening the (non-call) returns.
llvm-svn: 337673
This specifically covers different ways of making indirect calls and
jumps. There are some bugs in SLH that I will be fixing in subsequent
patches where the diff in the generated instructions makes the bug fix
much more clear, so just checking in a baseline of this test to start.
I'm also going to be adding direct mitigation for variant 1.2 which this
file very specifically tests in the various forms it can arise on x86.
Again, the diff to the generated instructions should make the change for
that much more clear, so having the test as a baseline seems useful.
llvm-svn: 337672
This provides an overview of the algorithm used to harden specific
loads. It also brings this our terminology further in line with
hardening rather than checking.
Differential Revision: https://reviews.llvm.org/D49583
llvm-svn: 337667
This seems to be a net improvement. There's still an issue under avx512f where we have a 512-bit vpaddd, but not vpmaddwd so we end up doing two 256-bit vpmaddwds and inserting the results before a 512-bit vpaddd. It might be better to do two 512-bits paddds with zeros in the upper half. Same number of instructions, but breaks a dependency.
llvm-svn: 337656
Summary:
This takes 22ms out of ~20s compiling sqlite3.c because we call it
for every unit of compilation and every pass.
Reviewers: paquette, anemet
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D49586
llvm-svn: 337654
This is used on an extract vector element index which is most cases is going to be an i32 or i64 and the element will be a valid element number. But it is possible to construct IR with a larger type and large out of range value.
llvm-svn: 337652
Summary: The original text was lifted from the MCA README. I re-ran the dot-product example and updated the output seen in the docs. I also added a few paragraphs discussing the instruction issued and retired histograms, as well as discussing the register file stats.
Reviewers: andreadb, RKSimon, courbet, gbedwell, filcab
Reviewed By: andreadb
Subscribers: tschuett
Differential Revision: https://reviews.llvm.org/D49614
llvm-svn: 337648
This is a follow-up to the rL335185. Those commit adds some WrapperPat
patterns for microMIPS target. But declaration of the WrapperPat class
is under the NotInMicroMips predicate and microMIPS patterns cannot be
selected because predicate (Subtarget->inMicroMipsMode()) &&
(!Subtarget->inMicroMipsMode()) is always false.
This change move out the WrapperPat class declaration from the
NotInMicroMips predicate and enables microMIPS WrapperPat patterns.
Differential revision: https://reviews.llvm.org/D49533
llvm-svn: 337646
If an error occurs and we write it to stderr, it could appear
before we wrote the mangled name which we're undecorating.
By flushing stdout first, we ensure that the messages are always
sequenced in the correct order.
llvm-svn: 337645
Summary:
This flag is used when emitting debug info and is needed to initialize subprogram and member function attributes (function options) for Codeview. These function options are used to create an accurate compiler type for UDT symbols (class/struct/union) from PDBs.
It is not easy to determine if a C++ record is trivial or not based on the current DICompositeType flags and other accessible debug information from Codeview. For example, without this flag the metadata for a non-trivial C++ record with user-defined ctor and a trivial one with a defaulted ctor are the same.
struct S { S(); }
struct S { S() = default; }
This change introduces a new DI flag and corresponding clang::CXXRecordDecl::isTrivial method to set the flag in the frontend.
Reviewers: rnk, zturner, llvm-commits, dblaikie, aleksandr.urakov, deadalnix
Reviewed By: rnk
Subscribers: asmith, probinson, aprantl, JDevlieghere
Differential Revision: https://reviews.llvm.org/D45122
llvm-svn: 337641
We tested different cap values with a recent commit of Chromium. Our results show that the 32-byte cap yields the smallest binary and all the caps yield similar performance.
Based on the results, we propose to change the cap value to 32-byte.
Patch by Zhaomo Yang!
Differential Revision: https://reviews.llvm.org/D49405
llvm-svn: 337622
