Changes getRecurrenceIdentity to always return a neutral value of -0.0 for FAdd.
Reviewed By: dmgreen, spatel
Differential Revision: https://reviews.llvm.org/D98963
For VPWidenPHIRecipes that model all incoming values as VPValue
operands, print those operands instead of printing the original PHI.
D99294 updates recipes of reduction PHIs to use the VPValue for the
incoming value from the loop backedge, making use of this new printing.
During vectorization better to postpone the vectorization of the CmpInst
instructions till the end of the basic block. Otherwise we may vectorize
it too early and may miss some vectorization patterns, like reductions.
Reworked part of D57059
Differential Revision: https://reviews.llvm.org/D99796
This patch moves mapping of IR operands to VPValues out of
tryToCreateWidenRecipe. This allows using existing VPValue operands when
widening recipes directly, which will be introduced in future patches.
The ultimate reduction node may have multiple uses, but if the ultimate
reduction is min/max reduction and based on SelectInstruction, the
condition of this select instruction must have only single use.
Differential Revision: https://reviews.llvm.org/D99753
The motivation for this patch is to better estimate the cost of
extracelement instructions in cases were they are going to be free,
because the source vector can be used directly.
A simple example is
%v1.lane.0 = extractelement <2 x double> %v.1, i32 0
%v1.lane.1 = extractelement <2 x double> %v.1, i32 1
%a.lane.0 = fmul double %v1.lane.0, %x
%a.lane.1 = fmul double %v1.lane.1, %y
Currently we only consider the extracts free, if there are no other
users.
In this particular case, on AArch64 which can fit <2 x double> in a
vector register, the extracts should be free, independently of other
users, because the source vector of the extracts will be in a vector
register directly, so it should be free to use the vector directly.
The SLP vectorized version of noop_extracts_9_lanes is 30%-50% faster on
certain AArch64 CPUs.
It looks like this does not impact any code in
SPEC2000/SPEC2006/MultiSource both on X86 and AArch64 with -O3 -flto.
This originally regressed after D80773, so if there's a better
alternative to explore, I'd be more than happy to do that.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D99719
1. Need to cleanup InstrElementSize map for each new tree, otherwise might
use sizes from the previous run of the vectorization attempt.
2. No need to include into analysis the instructions from the different basic
blocks to save compile time.
Differential Revision: https://reviews.llvm.org/D99677
Use SetVector instead of SmallPtrSet to track values with uniform use. Doing this
can help avoid non-determinism caused by iterating over unordered containers.
This bug was found with reverse iteration turning on,
--extra-llvm-cmake-variables="-DLLVM_REVERSE_ITERATION=ON".
Failing LLVM test consecutive-ptr-uniforms.ll .
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99549
This marks FSIN and other operations to EXPAND for scalable
vectors, so that they are not assumed to be legal by the cost-model.
Depends on D97470
Reviewed By: dmgreen, paulwalker-arm
Differential Revision: https://reviews.llvm.org/D97471
Use SetVector instead of SmallPtrSet for external definitions created for VPlan.
Doing this can help avoid non-determinism caused by iterating over unordered containers.
This bug was found with reverse iteration turning on,
--extra-llvm-cmake-variables="-DLLVM_REVERSE_ITERATION=ON".
Failing LLVM-Unit test VPRecipeTest.dump.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D99544
This patch adds support for the vectorization of induction variables when
using scalable vectors, which required the following changes:
1. Removed assert from InnerLoopVectorizer::getStepVector.
2. Modified InnerLoopVectorizer::createVectorIntOrFpInductionPHI to use
a runtime determined value for VF and removed an assert.
3. Modified InnerLoopVectorizer::buildScalarSteps to work for scalable
vectors. I did this by calculating the full vector value for each Part
of the unroll factor (UF) and caching this in the VP state. This means
that we are always able to extract an arbitrary element from the vector
if necessary. In addition to this, I also permitted the caching of the
individual lane values themselves for the known minimum number of elements
in the same way we do for fixed width vectors. This is a further
optimisation that improves the code quality since it avoids unnecessary
extractelement operations when extracting the first lane.
4. Added an assert to InnerLoopVectorizer::widenPHIInstruction, since while
testing some code paths I noticed this is currently broken for scalable
vectors.
Various tests to support different cases have been added here:
Transforms/LoopVectorize/AArch64/sve-inductions.ll
Differential Revision: https://reviews.llvm.org/D98715
Re-apply 25fbe803d4db, with a small update to emit the right remark
class.
Original message:
[LV] Move runtime pointer size check to LVP::plan().
This removes the need for the remaining doesNotMeet check and instead
directly checks if there are too many runtime checks for vectorization
in the planner.
A subsequent patch will adjust the logic used to decide whether to
vectorize with runtime to consider their cost more accurately.
Reviewed By: lebedev.ri
This is a 2nd try of:
3c8473ba534
which was reverted at:
a26312f9d4f
because of crashing.
This version includes extra code and tests to avoid the known
crashing examples as discussed in PR49730.
Original commit message:
As noted in D98152, we need to patch SLP to avoid regressions when
we start canonicalizing to integer min/max intrinsics.
Most of the real work to make this possible was in:
7202f47508
Differential Revision: https://reviews.llvm.org/D98981
This removes the need for the remaining doesNotMeet check and instead
directly checks if there are too many runtime checks for vectorization
in the planner.
A subsequent patch will adjust the logic used to decide whether to
vectorize with runtime to consider their cost more accurately.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D98634
This reverts commit 3c8473ba534daa3 and includes test diffs to
maintain testing status.
There's at least 1 place that was not updated with 7202f47508 ,
so we can crash mismatching select and intrinsics as shown in
PR49730.
This patch simplifies the calculation of certain costs in
getInstructionCost when isScalarAfterVectorization() returns a true value.
There are a few places where we multiply a cost by a number N, i.e.
unsigned N = isScalarAfterVectorization(I, VF) ? VF.getKnownMinValue() : 1;
return N * TTI.getArithmeticInstrCost(...
After some investigation it seems that there are only these cases that occur
in practice:
1. VF is a scalar, in which case N = 1.
2. VF is a vector. We can only get here if: a) the instruction is a
GEP/bitcast with scalar uses, or b) this is an update to an induction variable
that remains scalar.
I have changed the code so that N is assumed to always be 1. For GEPs
the cost is always 0, since this is calculated later on as part of the
load/store cost. For all other cases I have added an assert that none of the
users needs scalarising, which didn't fire in any unit tests.
Only one test required fixing and I believe the original cost for the scalar
add instruction to have been wrong, since only one copy remains after
vectorisation.
Differential Revision: https://reviews.llvm.org/D98512
The SCEV commit b46c085d2b6d1 [NFCI] SCEVExpander:
emit intrinsics for integral {u,s}{min,max} SCEV expressions
seems to reveal a new crash in SLPVectorizer.
SLP crashes expecting a SelectInst as an externally used value
but umin() call is found.
The patch relaxes the assumption to make the IR flag propagation safe.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D99328
We do not need to scan further if the upper end or lower end of the
basic block is reached already and the instruction is not found. It
means that the instruction is definitely in the lower part of basic
block or in the upper block relatively.
This should improve compile time for the very big basic blocks.
Differential Revision: https://reviews.llvm.org/D99266
This patch changes the interface to take a RegisterKind, to indicate
whether the register bitwidth of a scalar register, fixed-width vector
register, or scalable vector register must be returned.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D98874
We know if the loop contains FP instructions preventing vectorization
after we are done with legality checks. This patch updates the code the
check for un-vectorizable FP operations earlier, to avoid unnecessarily
running the cost model and picking a vectorization factor. It also makes
the code more direct and moves the check to a position where similar
checks are done.
I might be missing something, but I don't see any reason to handle this
check differently to other, similar checks.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D98633
Added getPointersDiff function to LoopAccessAnalysis and used it instead
direct calculatoin of the distance between pointers and/or
isConsecutiveAccess function in SLP vectorizer to improve compile time
and detection of stores consecutive chains.
Part of D57059
Differential Revision: https://reviews.llvm.org/D98967
Added getPointersDiff function to LoopAccessAnalysis and used it instead
direct calculatoin of the distance between pointers and/or
isConsecutiveAccess function in SLP vectorizer to improve compile time
and detection of stores consecutive chains.
Part of D57059
Differential Revision: https://reviews.llvm.org/D98967
As noted in D98152, we need to patch SLP to avoid regressions when
we start canonicalizing to integer min/max intrinsics.
Most of the real work to make this possible was in:
7202f47508
Differential Revision: https://reviews.llvm.org/D98981
In places where we create a ConstantVector whose elements are a
linear sequence of the form <start, start + 1, start + 2, ...>
I've changed the code to make use of CreateStepVector, which creates
a vector with the sequence <0, 1, 2, ...>, and a vector addition
operation. This patch is a non-functional change, since the output
from the vectoriser remains unchanged for fixed length vectors and
there are existing asserts that still fire when attempting to use
scalable vectors for vectorising induction variables.
In a later patch we will enable support for scalable vectors
in InnerLoopVectorizer::getStepVector(), which relies upon the new
stepvector intrinsic in IRBuilder::CreateStepVector.
Differential Revision: https://reviews.llvm.org/D97861
The name is included when printing in DOT mode. Also print it in non-DOT
mode after 93a9d2de8f4f.
This will become more important to distinguish different plans once
VPlans are gradually refined.
Make sure we use PowerOf2Floor instead of PowerOf2Ceil when
calculating max number of elements that fits inside a vector
register (otherwise we could end up creating vectors larger
than the maximum vector register size).
Also make sure we honor the min/max VF (as given by TTI or
cmd line parameters) when doing vectorizeStores.
Reviewed By: anton-afanasyev
Differential Revision: https://reviews.llvm.org/D97691
I foresee two uses for this:
1) It's easier to use those in debugger.
2) Once we start implementing more VPlan-to-VPlan transformations (especially
inner loop massaging stuff), using the vectorized LLVM IR as CHECK targets in
LIT test would become too obscure. I can imagine that we'd want to CHECK
against VPlan dumps after multiple transformations instead. That would be
easier with plain text dumps than with DOT format.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96628
This reverts commit 6b053c9867a3ede32e51cef3ed972d5ce5b38bc0.
The build is broken:
ld.lld: error: undefined symbol: llvm::VPlan::printDOT(llvm::raw_ostream&) const
>>> referenced by LoopVectorize.cpp
>>> LoopVectorize.cpp.o:(llvm::LoopVectorizationPlanner::printPlans(llvm::raw_ostream&)) in archive lib/libLLVMVectorize.a
I foresee two uses for this:
1) It's easier to use those in debugger.
2) Once we start implementing more VPlan-to-VPlan transformations (especially
inner loop massaging stuff), using the vectorized LLVM IR as CHECK targets in
LIT test would become too obscure. I can imagine that we'd want to CHECK
against VPlan dumps after multiple transformations instead. That would be
easier with plain text dumps than with DOT format.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96628
If SLP vectorizer tries to extend the scheduling region and runs out of
the budget too early, but still extends the region to the new ending
instructions (i.e., it was able to extend the region for the first
instruction in the bundle, but not for the second), the compiler need to
recalculate dependecies in full, just like if the extending was
successfull. Without it, the schedule data chunks may end up with the
wrong number of (unscheduled) dependecies and it may end up with the
incorrect function, where the vectorized instruction does not dominate
on the extractelement instruction.
Differential Revision: https://reviews.llvm.org/D98531
This adds an Mask ArrayRef to getShuffleCost, so that if an exact mask
can be provided a more accurate cost can be provided by the backend.
For example VREV costs could be returned by the ARM backend. This should
be an NFC until then, laying the groundwork for that to be added.
Differential Revision: https://reviews.llvm.org/D98206
The `hasIrregularType` predicate checks whether an array of N values of type Ty is "bitcast-compatible" with a <N x Ty> vector.
The previous check returned invalid results in some cases where there's some padding between the array elements: eg. a 4-element array of u7 values is considered as compatible with <4 x u7>, even though the vector is only loading/storing 28 bits instead of 32.
The problem causes LLVM to generate incorrect code for some targets: for AArch64 the vector loads/stores are lowered in terms of ubfx/bfi, effectively losing the top (N * padding bits).
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D97465
This adds the cost of an i1 extract and a branch to the cost in
getMemInstScalarizationCost when the instruction is predicated. These
predicated loads/store would generate blocks of something like:
%c1 = extractelement <4 x i1> %C, i32 1
br i1 %c1, label %if, label %else
if:
%sa = extractelement <4 x i32> %a, i32 1
%sb = getelementptr inbounds float, float* %pg, i32 %sa
%sv = extractelement <4 x float> %x, i32 1
store float %sa, float* %sb, align 4
else:
So this increases the cost by the extract and branch. This is probably
still too low in many cases due to the cost of all that branching, but
there is already an existing hack increasing the cost using
useEmulatedMaskMemRefHack. It will increase the cost of a memop if it is
a load or there are more than one store. This patch improves the cost
for when there is only a single store, and hopefully at some point in
the future the hack can be removed.
Differential Revision: https://reviews.llvm.org/D98243
Current SLP pass has this piece of code that inserts a trunc instruction
after the vectorized instruction. In the case that the vectorized instruction
is a phi node and not the last phi node in the BB, the trunc instruction
will be inserted between two phi nodes, which will trigger verify problem
in debug version or unpredictable error in another pass.
This patch changes the algorithm to 'if the last vectorized instruction
is a phi, insert it after the last phi node in current BB' to fix this problem.
The motivation is to handle integer min/max reductions independently
of whether they are in the current cmp+sel form or the planned intrinsic
form.
We assumed that min/max included a select instruction, but we can
decouple that implementation detail by checking the instructions
themselves rather than relying on the recurrence (reduction) type.
Instead of maintaining a separate map from predicated instructions to
recipes, we can instead directly look at the VP operands. If the operand
comes from a predicated instruction, the operand will be a
VPPredInstPHIRecipe with a VPReplicateRecipe as its operand.
This patch adds support for reverse loop vectorization.
It is possible to vectorize the following loop:
```
for (int i = n-1; i >= 0; --i)
a[i] = b[i] + 1.0;
```
with fixed or scalable vector.
The loop-vectorizer will use 'reverse' on the loads/stores to make
sure the lanes themselves are also handled in the right order.
This patch adds support for scalable vector on IRBuilder interface to
create a reverse vector. The IR function
CreateVectorReverse lowers to experimental.vector.reverse for scalable vector
and keedp the original behavior for fixed vector using shuffle reverse.
Differential Revision: https://reviews.llvm.org/D95363
