Adds Parser and Semantic Support for the below construct and clauses:
- Interop Construct
- Init Clause
- Use Clause
Note:
The other clauses supported by Interop Construct such as Destroy, Use,
Depend and Device are added already.
…UCTION
This patch allows better parsing of the reduction and initializer
components, including supporting derived types in both those places.
There is more work needed here, but this is a definite improvement in
what can be handled through parser and semantics.
Note that declare reduction is still not supported in lowering, so any
attempt to compile DECLARE REDUCTION code will end with a TODO aka "Not
yet implemented" abort in the compiler.
Note that this version of the code does not cover declaring multiple
reductions using the same name with different types. This is will be
fixed in a future patch. [This was also the case before this change].
One existing test modified to actually compile (as it didn't in the
original form).
The cancellable construct names on CANCEL or CANCELLATION POINT
directives are actually clauses (with the same names as the
corresponding constructs).
Instead of parsing them into a custom structure, parse them as a clause,
which will make CANCEL/CANCELLATION POINT follow the same uniform scheme
as other constructs (<directive> [(<arguments>)] [clauses]).
Then use this in the Flang compiler for parsing the OpenMP declare
reduction.
This has no real functional change to the existing code, it's only
moving the declaration itself around.
A few tests has been updated, to reflect the new type names.
The syntax with the object list following the memory-order clause has
been removed in OpenMP 5.2. Still, accept that syntax with versions >=
5.2, but treat it as deprecated (and emit a warning).
The DECLARE REDUCTION allows the initialization part to be either an
expression or a call to a subroutine.
This modifies the parsing and semantic analysis to allow the use of the
subroutine, in addition to the simple expression that was already
supported.
New tests in parser and semantics sections check that the generated
structure is as expected.
DECLARE REDUCTION lowering is not yet implemented, so will end in a
TODO. A new test with an init subroutine is added, that checks that this
variant also ends with a "Not yet implemented" message.
Enough suport to parse correctly formed directives of !$OMP ASSUME and
!$OMP ASSUMES with teh related clauses that go with them: ABSENT,
CONTAINS, NO_OPENPP, NO_OPENMP_ROUTINES, NO_PARALLELISM and HOLDS.
Tests added for unparsing and dump parse-tree.
Semantics support is very minimal and no specific tests added.
The lowering will hit a TODO, and there are tests in Lower/OpenMP/Todo
to make it clear that this is currently expected behaviour.
---------
Co-authored-by: Kiran Chandramohan <kiran.chandramohan@arm.com>
Co-authored-by: Krzysztof Parzyszek <Krzysztof.Parzyszek@amd.com>
Part of the DECLARE REDUCTION was already supported by the parser, but
the semantics to add the reduction identifier wasn't implemented.
The semantics would not accept the name given by the reduction, so a few
lines added to support that.
Some tests were in place but not quite working, so fixed those up too.
Adding new tests for unparsing and parse-tree, as well as checking the
symbolic name being generated.
Lowering of DECLARE REDUCTION is not supported in this patch, and a test
that it hits the relevant TODO is in this patch (most of this was
already existing, but not actually testing the TODO message).
Implement parsing and symbol resolution for directives that take
arguments. There are a few, and most of them take objects. Special
handling is needed for two that take more specialized arguments: DECLARE
MAPPER and DECLARE REDUCTION.
This only affects directives in METADIRECTIVE's WHEN and OTHERWISE
clauses. Parsing and semantic checks of other cases is unaffected.
Parse METADIRECTIVE as a standalone executable directive at the moment.
This will allow testing the parser code.
There is no lowering, not even clause conversion yet. There is also no
verification of the allowed values for trait sets, trait properties.
A trait poperty can be one of serveral alternatives (name, expression,
etc.), and each property in a list was parsed as if it could be any of
these alternatives independently from other properties. This made the
parsing vulnerable to certain ambiguities in the trait grammar (provided
in the OpenMP spec).
At the same time the OpenMP spec gives the expected types of properties
for almost every trait: all properties listed for a given trait are
usually of the same type, e.g. names, clauses, etc.
Incorporate these restrictions into the parser, and additionally use
property extensions as the fallback if the parsing of the expected
property type failed. This is intended to allow the parser to succeed,
and instead let the semantic-checking code emit a more user-friendly
message.
This allows the Flang parser to accept the !$OMP DISPATCH and related
clauses.
Lowering is currently not implemented. Tests for unparse and parse-tree
dump is provided, and one for checking that the lowering ends in a "not
yet implemented"
---------
Co-authored-by: Kiran Chandramohan <kiran.chandramohan@arm.com>
This is trivially additional support for the existing ALLOCATE
directive, which allows an ALIGN clause.
The ALLOCATE directive is currently not implemented, so this is just
addding the necessary parser parts to allow the compiler to not say
"Huh? I don't get this" [or "Expected OpenMP construct"] when it
encounters the ALIGN clause.
Some parser testing is updated and a new todo test, just in case the
feature of align clause is not supported by the initial support for
ALLOCATE.
Allow utility constructs (error and nothing) to appear in the
specification part as well as the execution part. The exception is
"ERROR AT(EXECUTION)" which should only be in the execution part.
In case of ambiguity (the boundary between the specification and the
execution part), utility constructs will be parsed as belonging to the
specification part. In such cases move them to the execution part in the
OpenMP canonicalization code.
The OmpLinearClause class was a variant of two classes, one for when the
linear modifier was present, and one for when it was absent. These two
classes did not follow the conventions for parse tree nodes, (i.e.
tuple/wrapper/union formats), which necessitated specialization of the
parse tree visitor.
The new form of OmpLinearClause is the standard tuple with a list of
modifiers and an object list. The specialization of parse tree visitor
for it has been removed.
Parsing and unparsing of the new form bears additional complexity due to
syntactical differences between OpenMP 5.2 and prior versions: in OpenMP
5.2 the argument list is post-modified, while in the prior versions, the
step modifier was a post-modifier while the linear modifier had an
unusual syntax of `modifier(list)`.
With this change the LINEAR clause is no different from any other
clauses in terms of its structure and use of modifiers. Modifier
validation and all other checks work the same as with other clauses.
Support the atomic compare option of a fail(memory-order) clauses.
Additional tests introduced to check that parsing and semantics checks
for the new clause is handled.
Lowering for atomic compare is still unsupported and wil end in a TOOD
(aka "Not yet implemented"). A test for this case with the fail clause
is also present.
This is a mostly mechanical change from specific modifiers embedded
directly in a clause to the Modifier variant.
Additional comments and references to the OpenMP specs were added.
The intent is to keep names in sync with the terminology from the OpenMP
spec:
```
OmpBindClause::Type -> Binding
OmpDefaultClause::Type -> DataSharingAttribute
OmpDeviceTypeClause::Type -> DeviceTypeDescription
OmpProcBindClause::Type -> AffinityPolicy
```
Add more comments with references to the OpenMP specs.
This adds a minimalistic implementation of parsing and semantics for the
ATOMIC COMPARE feature from OpenMP 5.1.
There is no lowering, just a TODO for that part. Some of the Semantics
is also just a comment explaining that more is needed.
Again, this simplifies the semantic checks and lowering quite a bit.
Update the check for positive alignment to use a more informative
message, and to highlight the modifier itsef, not the whole clause.
Remove the checks for the allocator expression itself being positive:
there is nothing in the spec that says that it should be positive.
Remove the "simple" modifier from the AllocateT template, since both
simple and complex modifiers are the same thing, only differing in
syntax.
This removes the specialized parsers and helper classes for these
clauses, namely ConcatSeparated, MapModifiers, and MotionModifiers. Map
and the motion clauses are now handled in the same way as all other
clauses with modifiers, with one exception: the commas separating their
modifiers are optional. This syntax is deprecated in OpenMP 5.2.
Implement version checks for modifiers: for a given modifier on a given
clause, check if that modifier is allowed on this clause in the
specified OpenMP version. This replaced several individual checks.
Add a testcase for handling map modifiers in a different order, and for
diagnosing an ultimate modifier out of position.
This actually simplifies the AST node for the schedule clause: the two
allowed modifiers can be easily classified as the ordering-modifier and
the chunk-modifier during parsing without the need to create additional
classes.
Also, define helper macros in parse-tree.h.
Apply the new modifier representation to the DEFAULTMAP and REDUCTION
clauses, with testcases utilizing the new modifier validation.
OpenMP modifier overhaul: #3/3
This is the first part of the effort to make parsing of clause modifiers
more uniform and robust. Currently, when multiple modifiers are allowed,
the parser will expect them to appear in a hard-coded order.
Additionally, modifier properties (such as "ultimate") are checked
separately for each case.
The overall plan is
1. Extract all modifiers into their own top-level classes, and then
equip them with sets of common properties that will allow performing the
property checks generically, without refering to the specific kind of
the modifier.
2. Define a parser (as a separate class) for each modifier.
3. For each clause define a union (std::variant) of all allowable
modifiers, and parse the modifiers as a list of these unions.
The intent is also to isolate parts of the code that could eventually be
auto-generated.
OpenMP modifier overhaul: #1/3
This prepares for using the DECLARE MAPPER construct.
A check in lowering will say "Not implemented" when trying to use a
mapper as some code is required to tie the mapper to the declared one.
Senantics check for the symbol generated.
Add ALL variable category, implement semantic checks to verify the
validity of the clause, improve error messages, add testcases.
The variable category modifier is optional since 5.0, make sure we allow
it to be missing. If it is missing, assume "all" in clause conversion.
Extract the SINK/SOURCE parse tree elements into a separate class
`OmpDoacross`, share them between DEPEND and DOACROSS clauses. Most of
the changes in Semantics are to accommodate the new contents of
OmpDependClause, and a mere introduction of OmpDoacrossClause.
There are no semantic checks specifically for DOACROSS.
Parse PRESENT modifier as well while we're at it (no MAPPER though). Add
semantic checks for these clauses in the TARGET UPDATE construct, TODO
messages in lowering.
Issue deprecation warning for these directives.
Lowering currently supports parallel master, for all other combined or
composite directives involving master, issue TODO errors.
Note: The first commit changes the formatting and generalizes the
deprecation message emission for reuse in the second commit. I can pull
it out into a separate commit if required.
Parse the locator list in OmpDependClause as an OmpObjectList (instead
of a list of Designators). When a common block appears in the locator
list, show an informative message.
Implement resolving symbols in DependSinkVec in a dedicated visitor
instead of having a visitor for OmpDependClause.
Resolve unresolved names common blocks in OmpObjectList.
Minor changes to the code organization:
- rename OmpDependenceType to OmpTaskDependenceType (to follow 5.2
terminology),
- rename Depend::WithLocators to Depend::DepType,
- add comments with more detailed spec references to parse-tree.h.
---------
Co-authored-by: Kiran Chandramohan <kiran.chandramohan@arm.com>
