Support and generate Compare and Traps like CRT, CIT, etc.
Support Trap as legal DAG opcodes and generate "j .+2" for them by default.
Add support for Conditional Traps and use the If Converter to convert them into
the corresponding compare and trap opcodes.
Differential Revision: http://reviews.llvm.org/D21155
llvm-svn: 272419
Summary:
We need to set the fixup type to FK_Data_4 for the
SCRATCH_RSRC_DWORD[01] symbols, since these require absolute
relocations, and fixup_si_rodata is for relative relocations.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21153
llvm-svn: 272417
Adds a MachineFunctionPass that scans the body to find calls, and
update the register mask with the one saved by the
RegUsageInfoCollector analysis in PhysicalRegisterUsageInfo.
Patch by Vivek Pandya <vivekvpandya@gmail.com>
Differential Revision: http://reviews.llvm.org/D21180
llvm-svn: 272414
Add an option to enable the analysis of MachineFunction register
usage to extract the list of clobbered registers.
When enabled, the CodeGen order is changed to be bottom up on the Call
Graph.
The analysis is split in two parts, RegUsageInfoCollector is the
MachineFunction Pass that runs post-RA and collect the list of
clobbered registers to produce a register mask.
An immutable pass, RegisterUsageInfo, stores the RegMask produced by
RegUsageInfoCollector, and keep them available. A future tranformation
pass will use this information to update every call-sites after
instruction selection.
Patch by Vivek Pandya <vivekvpandya@gmail.com>
Differential Revision: http://reviews.llvm.org/D20769
llvm-svn: 272403
Somehow, the codegen logic for these sequences has gone completely untested
until now (note the 2 compare instructions generated per test).
There's also an *Intel* AVX optimization opportunity exposed in these cases
and the existing tests. Intel's (but not AMD's) AVX spec shows that extra FP
predicates were added, so a single comparison should always be sufficient,
and operand commutation should never be necessary.
llvm-svn: 272397
Memory operand is new for AVX512 (SSE/AVX2 didn't support it).
Also dropped the 'mask' from the tests (VPSLLDQ/VPSRLDQ don't support masked operations).
Regenerated VPALIGNR test now that the shuffle comments work
llvm-svn: 272383
The test case is not great espicially because it is still cumbersome to
run the regalloc pass with run-pass. (We miss a bunch of initiliazier to
be properly implemented.)
Related to llvm.org/PR27983
llvm-svn: 272360
Previously we could run only one machine pass with the run-pass option.
With that patch, we can now specify several passes with several run-pass
options (or just one option with a list of comma separated passes) and
llc will build the related pipeline.
This is great to test the interaction of two passes that are not
necessarily next to each other in the pipeline, or play with pass
ordering.
Now, we should be at parity with opt for the flexibility of running
passes.
Note: I also moved the run pass option from CommandFlags.h to llc.cpp
because, really, this is needed only there!
llvm-svn: 272356
Summary:
This fixes a bug with ds_*permute instructions where if it was passed a
constant address, then the offset operand would get assigned a register
operand instead of an immediate.
Reviewers: scchan, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19994
llvm-svn: 272349
This was using extract_subreg sub0 to extract the low register
of the result instead of sub0_sub1, producing an invalid copy.
There doesn't seem to be a way to use the compound subreg indices
in tablegen since those are generated, so manually select it.
llvm-svn: 272344
512-bit VPSLLDQ/VPSRLDQ can only be used for avx512bw targets so lowerVectorShuffleAsShift had to be adjusted to include the subtarget
llvm-svn: 272300
Summary:
Currently clang emits these instructions via inline (volatile) asm in
the CUDA headers. Switching to intrinsics will let the optimizer reason
across calls to these intrinsics.
Reviewers: tra
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D21160
llvm-svn: 272298
This reapplies commit r271930, r271915, r271923. They hit a bug in
Thumb which is fixed in r272258 now.
The original message:
The code layout that TailMerging (inside BranchFolding) works on is not the
final layout optimized based on the branch probability. Generally, after
BlockPlacement, many new merging opportunities emerge.
This patch calls Tail Merging after MBP and calls MBP again if Tail Merging
merges anything.
llvm-svn: 272267
This enables use of the 'S' constraint for inline ASM operands on
SystemZ, which allows for a memory reference with a signed 20-bit
immediate displacement. This patch includes corresponding documentation
and test case updates.
I've changed the 'T' constraint to match the new behavior for 'S', as
'T' also uses a long displacement (though index constraints are still
not implemented). I also changed 'm' to match the behavior for 'S' as
this will allow for a wider range of displacements for 'm', though
correct me if that's not the right decision.
Author: colpell
Differential Revision: http://reviews.llvm.org/D21097
llvm-svn: 272266
This is made possible by removing an assert in llc that assumed
MIRParser::parseLLVMModule would exit on error. MIRParser's documentation states
that it returns null if a parsing error occurs, so there's no reason to assert.
We can instead just fall through to where the check for a module is performed
and exit if it is null.
This commit is part of the clean-up after r269655.
Fixes PR27770
Differential Revision: http://reviews.llvm.org/D20371
llvm-svn: 272254
If an immediate is only used in an AND node, it is possible that the immediate can be more optimally materialized when negated. If this is the case, we can negate the immediate and use a BIC instead;
int i(int a) {
return a & 0xfffffeec;
}
Used to produce:
ldr r1, [CONSTPOOL]
ands r0, r1
CONSTPOOL: 0xfffffeec
And now produces:
movs r1, #255
adds r1, #20 ; Less costly immediate generation
bics r0, r1
llvm-svn: 272251
Without that check it was possible to write test cases where the size
was not specified and we ended up with weird asserts down the road,
because the default value (1) would not make sense.
llvm-svn: 272226
Summary:
Consider the following diamond CFG:
A
/ \
B C
\/
D
Suppose A->B and A->C have probabilities 81% and 19%. In block-placement, A->B is called a hot edge and the final placement should be ABDC. However, the current implementation outputs ABCD. This is because when choosing the next block of B, it checks if Freq(C->D) > Freq(B->D) * 20%, which is true (if Freq(A) = 100, then Freq(B->D) = 81, Freq(C->D) = 19, and 19 > 81*20%=16.2). Actually, we should use 25% instead of 20% as the probability here, so that we have 19 < 81*25%=20.25, and the desired ABDC layout will be generated.
Reviewers: djasper, davidxl
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20989
llvm-svn: 272203
Teach AArch64RegisterBankInfo that G_OR can be mapped on either GPR or
FPR for 64-bit or 32-bit values.
Add test cases demonstrating how this information is used to coalesce a
computation on a single register bank.
llvm-svn: 272170
The MSR instructions can write to the CPSR, but we did not model this
fact, so we could emit them in the middle of IT blocks, changing the
condition flags for later instructions in the block.
The tests use two calls to llvm.write_register.i32 because it is valid
to use these instructions at the end of an IT block, which if conversion
does do in some cases. With two calls, the first clobbers the flags, so
a branch has to be used to make the second one conditional.
Differential Revision: http://reviews.llvm.org/D21139
llvm-svn: 272154
Summary:
The presence of this attribute indicates that VGPR outputs should be computed
in whole quad mode. This will be used by Mesa for prolog pixel shaders, so
that derivatives can be taken of shader inputs computed by the prolog, fixing
a bug.
The generated code could certainly be improved: if a prolog pixel shader is
used (which isn't common in modern OpenGL - they're used for gl_Color, polygon
stipples, and forcing per-sample interpolation), Mesa will use this attribute
unconditionally, because it has to be conservative. So WQM may be used in the
prolog when it isn't really needed, and furthermore a silly back-and-forth
switch is likely to happen at the boundary between prolog and main shader
parts.
Fixing this is a bit involved: we'd first have to add a mechanism by which
LLVM writes the WQM-related input requirements to the main shader part binary,
and then Mesa specializes the prolog part accordingly. At that point, we may
as well just compile a monolithic shader...
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95130
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D20839
llvm-svn: 272063
