Names '64BitDPP' and especially 'DPP64' were found misleading, and
DPP64 can easily be mixed with DPP16 and DPP8 while these are
different concepts. DPP16 and DPP8 refers to lanes where DPP64
refers to the operand size.
In fact the essential part here is that these instructions are
executed on the DP ALU, so rename the feature accordingly.
I have also found a bug in a check for these instructions, which is
fixed here and a common utility function is now used.
Differential Revision: https://reviews.llvm.org/D158465
Lower formal arguments and returns for functions with the
`amdgpu_cs_chain` and `amdgpu_cs_chain_preserve` calling conventions:
* Put `inreg` arguments into SGPRs, starting at s0, and other arguments
into VGPRs, starting at v8. No arguments should end up on the stack, if
we don't have enough registers we should error out.
* Lower the return (which is always void) as an S_ENDPGM.
* Set the ScratchRSrc register to s48:51, as described in the docs.
* Set the SP to s32, matching amdgpu_gfx. This might be revisited in a
future patch.
Differential Revision: https://reviews.llvm.org/D153517
This required two substantial changes:
1. Moving a `getRegBitWidth(TargetRegisterClass)` overload out of Utils
and into CodeGen
2. Passing the string function name to AMDGPUPALMetadata instead of the
MachineFunction
Other changes are minor or updates to accommodate the first two.
See issue #64166 for more information on the layering issue.
Differential Revision: https://reviews.llvm.org/D156486
Add functions AMDGPU::DepCtr::encodeField*() and AMDGPU::DepCtr::decodeField*()
for each of vm_vsrc, va_vdst and sa_sdst. These are now used in
AMDGPUInsertDelayAlu and GCNHazardRecognizer so as to make working with
S_WAITCNT_DEPCTR operands easier and more readable.
Differential Revision: https://reviews.llvm.org/D154424
This reduces dependencies on `llvm-tblgen` so much.
`CodeGenTypes` depends on `Support` at the moment.
Be careful to append deps on this, since Targets' tablegens
depend on this.
Depends on D149024
Differential Revision: https://reviews.llvm.org/D148769
This is rework of;
- D30046 (LLT)
Since I have introduced `llvm-min-tblgen` as D146352, `llvm-tblgen`
may depend on `CodeGen`.
`LowLevlType.h` originally belonged to `CodeGen`. Almost all userse are
still under `CodeGen` or `Target`. I think `CodeGen` is the right place
to put `LowLevelType.h`.
`MachineValueType.h` may be moved as well. (later, D149024)
I have made many modules depend on `CodeGen`. It is consistent but
inefficient. It will be split out later, D148769
Besides, I had to isolate MVT and LLT in modmap, since
`llvm::PredicateInfo` clashes between `TableGen/CodeGenSchedule.h`
and `Transforms/Utils/PredicateInfo.h`.
(I think better to introduce namespace llvm::TableGen)
Depends on D145937, D146352, and D148768.
Differential Revision: https://reviews.llvm.org/D148767
PAL Metadata 3.0 introduces an explicit structure in metadata for the
programmable registers written out by the compiler backend.
Rather than using opaque registers which can change between different
architectures and requires encoding the bitfield information in the backend,
which may change between versions.
This is the initial minimal implementation that enables the use of PAL Metadata
3.0.
The change itself should be NFC for non-PAL, although the way RSRC2 register is
handled has been changed slightly.
The test is fairly minimal, but checks that the metadata format looks as
expected and verifies a couple of special cases such as tgid_[xyz]_en handling
and PsInputAddr/Ena which also change to explicit fields.
Differential Revision: https://reviews.llvm.org/D147143
Pass disabled since approximately D104962 for miscompiling openmp
The functions under ReplaceConstant miscompile phis as noted in D112717 and
have no users in tree other than the disabled pass. It seems likely it has no
users out of tree.
Deletes the test cases associated with the disabled pass as well.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D147586
The premise here is to allow non-kernel functions to locate external LDS variables without using LDS or extra magic SGPRs to do so.
1/ First it crawls the callgraph to work out which external LDS variables are reachable from a given kernel
2/ Then it creates a new `extern char[0]` variable for each kernel, which will alias all the other extern LDS variables because that's the documented behaviour of these variables
3/ The address of that variable is written to a lookup table. The global variable is tagged with metadata to track what address it was allocated at by codegen
4/ The assembler builds the lookup table using the metadata
5/ Any non-kernel functions use the same magic intrinsic used by table lookups of non-dynamic LDS variables to find the address to use
Heavy overlap with the code paths taken for other lowering, in particular the same intrinsic is used to pass the dynamic scope information through the same sgpr as for table lookups of static LDS.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D144233
This is only used by CodeGen. Moving it out of AMDGPUBaseInfo simplifies
future changes to make some of it depend on the subtarget.
Differential Revision: https://reviews.llvm.org/D144650
Image sample instructions that need more than 5 VGPRs for VAddr can use
partial NSA for NSA encoding format. VGPRs that can not fit into the
encoding are sequential after the last one.
This patch adds assembly and disassembly parts.
Differential Revision: https://reviews.llvm.org/D144033
Moving this out of AMDGPUBaseInfo enforces that AMDGPUBaseInfo should
not be calling into GCNSubtarget.
Differential Revision: https://reviews.llvm.org/D144564
Reapplies 142c28ffa1323e9a8d53200a22c80d5d778e0d0f as part of D140242 which got reverted due to amdgpu openmp test failures.
This diff fixes said failures by eliding most of `adjustInliningThresholdUsingCallee` for indirect calls as the callee function is unavailable for indirect calls.
Reviewed By: arsenm, #amdgpu
Differential Revision: https://reviews.llvm.org/D143498
These are similar to hardware registers already added for GFX940,
but with different numbers and slightly different names.
Differential Revision: https://reviews.llvm.org/D143740
Summary:
This is part of the leftover work for https://reviews.llvm.org/D143138.
In this work, we pass code object version as an argument to initialize target ID
and use it for targetID dump.
Reviewers: arsenm
Differential Revision
https://reviews.llvm.org/D143293
Summary:
This patch introduces a mechanism to check the code object version from the module flag, This avoids checking from command line.
In case the module flag is missing, we use the current default code object version supported in the compiler.
For tools whose inputs are not IR, we may need other approach (directive, for example) to check the code
object version, That will be in a separate patch later.
For LIT tests update, we directly add module flag if there is only a single code object version associated with all checks in one file.
In cause of multiple code object version in one file, we use the "sed" method to "clone" the checks to achieve the goal.
Reviewer: arsenm
Differential Revision:
https://reviews.llvm.org/D14313
Right now we do opcode wise matching to identify uniform/non-divergent
AMDGPU intrinsics. It is duplicated at 2 places once at IR level uniformity analysis
and at MIR level. Moving them to single tablegen table for consistency and adding
and API rapper to access them.
Reviewed By: arsenm, #amdgpu
Differential Revision: https://reviews.llvm.org/D142961
Occupancy is expressed as waves per SIMD. This means that we need to
take into account the number of SIMDs per "CU" or, to be more precise,
the number of SIMDs over which a workgroup may be distributed.
getOccupancyWithLocalMemSize was wrong because it didn't take SIMDs
into account at all.
At the same time, we need to take into account that WGP mode offers
access to a larger total amount of LDS, since this can affect how
non-power-of-two LDS allocations are rounded. To make this work
consistently, we distinguish between (available) local memory size and
addressable local memory size (which is always limited by 64kB on
gfx10+, even with WGP mode).
This change results in a massive amount of test churn. A lot of it is
caused by the fact that the default work group size is 1024, which means
that (due to rounding effects) the default occupancy on older hardware
is 8 instead of 10, which affects scheduling via register pressure
estimates. I've adjusted most tests by just running the UTC tools, but
in some cases I manually changed the work group size to 32 or 64 to make
sure that work group size chunkiness has no effect.
Differential Revision: https://reviews.llvm.org/D139468
Change MCInstrDesc::operands to return an ArrayRef so we can easily use
it everywhere instead of the (IMHO ugly) opInfo_begin and opInfo_end.
A future patch will remove opInfo_begin and opInfo_end.
Also use it instead of raw access to the OpInfo pointer. A future patch
will remove this pointer.
Differential Revision: https://reviews.llvm.org/D142213
This mostly reverts commit 270e96f435596449002fc89962595497481c8770.
Keep the attributor related changes around, but functionally restore
the old behavior as a workaround. Device enqueue goes back to not
working at -O0 with this version.
Previously we considered this field to be either N-bit unsigned or
N+1-bit signed, depending on the instruction. I think it's conceptually
simpler to say that the field is always N+1-bit signed, but some
instructions do not allow negative values.
Differential Revision: https://reviews.llvm.org/D140883
They do not seem to be GFX10-specific anymore. Also renames the
corresponding feature.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D141069
Invert the sense of the attribute and let the attributor figure this
out like everything else. If needed we can have the not-OpenCL
languages set amdgpu-no-default-queue and amdgpu-no-completion-action
up front so they never have to pay the cost.
There are also so many of these now, the offset use API should
probably consider all of them at once. Maybe they should merge into
one attribute with used fields. Having separate functions for each
field in AMDGPUBaseInfo is also not the greatest API (might as well
fix this when the patch to get the object version from the module
lands).
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
This simplies a future patch. The MIR handling should be fixed. We're
still printing these in custom MachineFunctionInfo as bools (plus the
inverted meaning is hard to follow).
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
The most common case for string attributes parses them as integers. We
don't have a convenient way to do this, and as a result we have
inconsistent missing attribute and invalid attribute handling
scattered around. We also have inconsistent radix usage to
getAsInteger; some places use the default 0 and others use base 10.
Update a few of the uses, but there are quite a lot of these.
C++17 allows us to call constructors pair and tuple instead of helper
functions make_pair and make_tuple.
Differential Revision: https://reviews.llvm.org/D139828
Disassembler can successfully decode sgpr register when only vgpr
registers are valid for the operand (e.g. VReg_* and VISrc_* operands).
In InstPrinter, detect when operand register class does not contain
register that is being printed. Does not result in an error.
Intended use is for disassembler tests.
Differential Revision: https://reviews.llvm.org/D139646
This patch adds forward declarations of raw_ostream to those header
files that are relying on the forward declaration of raw_ostream in
llvm/include/llvm/ADT/Optional.h.
I'm planning to move operator<< for Optional<T> and std::optional<T>
from Optional.h to llvm/include/llvm/Support/raw_ostream.h. Once I do
so, we no longer need to forward-declare raw_ostream in Optional.h.
