In file PPCBranchSelector.cpp we tend to over estimate code size due to large
alignment and inline assembly. Usually it causes larger computed branch offset,
it is not big problem. But sometimes it may also causes smaller computed branch
offset than actual branch offset. If the offset is close to the limit of
encoding, it may cause problem at run time.
Following is a simplified example.
actual estimated
address address
...
bne Far 100 10c
.p2align 4
Near: 110 110
...
Far: 8108 8108
Actual offset: 0x8108 - 0x100 = 0x8008
Computed offset: 0x8108 - 0x10c = 0x7ffc
The computed offset is at most ((1 << alignment) - 4) bytes smaller than actual
offset. So we add this number to the offset for safety.
Differential Revision: https://reviews.llvm.org/D57718
llvm-svn: 355529
Summary:
This adds support for 64 bit buffer atomic arithmetic instructions but does not include
cmpswap as that depends on a fix to the way the register pairs are handled
Change-Id: Ib207ea65fb69487ccad5066ea647ae8ddfe2ce61
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58918
llvm-svn: 355520
As noticed on D58965
DAGCombiner::visitSELECT has something similar, so we should be able to move this to DAGCombiner and support VSELECT as well at some point.
Differential Revision: https://reviews.llvm.org/D58974
llvm-svn: 355494
During the lowering of a switch that would result in the generation of a
jump table, a range check is performed before indexing into the jump
table, for the switch value being outside the jump table range and a
conditional branch is inserted to jump to the default block. In case the
default block is unreachable, this conditional jump can be omitted. This
patch implements omitting this conditional branch for unreachable
defaults.
Differential Revision: https://reviews.llvm.org/D52002
Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 355490
This allows us to use an 8-bit sign extended immediate instead of a 16 or 32 bit immediate.
Also do similar for 0x80000000 with 64-bit adds to avoid having to use a movabsq.
llvm-svn: 355485
128 won't fit in a sign extended 8-bit immediate, but we can negate it to -128 and use the other operation. This results in a shorter encoding since the move would have used 16 or 32 bits for the immediate.
llvm-svn: 355484
During the lowering of a switch that would result in the generation of a
jump table, a range check is performed before indexing into the jump
table, for the switch value being outside the jump table range and a
conditional branch is inserted to jump to the default block. In case the
default block is unreachable, this conditional jump can be omitted. This
patch implements omitting this conditional branch for unreachable
defaults.
Differential Revision: https://reviews.llvm.org/D52002
Reviewers: Hans Wennborg, Eli Freidman, Roman Lebedev
llvm-svn: 355483
There was no proper test for that code in X86TargetLowering::LowerSELECT().
Noticed accidentally while trying to modify the last branch in that function.
llvm-svn: 355452
Tests only for integers, not floating point or pointers.
The scalar 8-bit case uses branch instead of CMOV,
because there is no no 8-bit CMOV.
Vector tests are for consistency, since it can be vectorized.
https://bugs.llvm.org/show_bug.cgi?id=40965
llvm-svn: 355436
We already do this for 16/32/64 as well as 8-bit add with register/immediate. Might as well do it for 8-bit INC/DEC too.
Differential Revision: https://reviews.llvm.org/D58869
llvm-svn: 355424
We already support 8-bits adds in convertToThreeAddress. But we can also support 8-bit OR if the bits are disjoint. We already do this for 16/32/64.
Differential Revision: https://reviews.llvm.org/D58863
llvm-svn: 355423
When lowering a select_cc node where the true and false values are of type f16,
we can't use a general conditional move because the FP16 instructions do not
support conditional execution. Instead, we must ensure that the condition code
is one of the four supported by the VSEL instruction.
Differential revision: https://reviews.llvm.org/D58813
llvm-svn: 355385
Summary:
In some cases the KILL was causing a hazard to be introduced as these were
scheduled into hazard slots, but don't result in an instruction.
KILL shouldn't be considered for hazard recognition.
Change-Id: Ib6d2a2160f8c94cd0ce611ab198c7e4f46aeffcf
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58898
llvm-svn: 355384
If There is no types/non-empty strings, do not generate
.BTF section. If there is no func_info/line_info, do
not generate .BTF.ext section.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D58936
llvm-svn: 355360
This adds instruction selection support for G_EXTRACT_VECTOR_ELT for cases
where the index is defined by a G_CONSTANT.
It also factos out the lane copy opcode selection part into its own function,
`getLaneCopyOpcode`. This is used by both `selectUnmergeValues` and
`selectExtractElt`.
Differential Revision: https://reviews.llvm.org/D58469
llvm-svn: 355344
The code to materialize a mask from a constant pool load tried to use a 128 bit
LDR to load a 64 bit constant pool entry, which was 8 byte aligned. This resulted
in a link failure in the NEON tests in the test suite since the LDR address was
unaligned. This change fixes that to instead emit a 64 bit LDR if the entry is
64 bit, before converting back to a 128 bit register for the TBL.
llvm-svn: 355326
This patch enables combining integer bitcasts of integer build vectors when the new scalar type is legal. I've avoided floating point because the implementation bitcasts float to int along the way and we would need to check the intermediate types for legality
Differential Revision: https://reviews.llvm.org/D58884
llvm-svn: 355324
X86TargetLowering::EmitLoweredSelect presently detects sequences of CMOV pseudo
instructions without accounting for debug intrinsics. This leads to different
codegen with and without option -g, if a DBG_VALUE instruction lands in the
middle of several lowered selects.
Work around this by skipping over debug instructions when looking for CMOV
sequences, and sinking those debug insts into the EmitLoweredSelect sunk block.
This might slightly shift where variables appear in the instruction sequence,
but won't re-order assignments.
Differential Revision: https://reviews.llvm.org/D58672
llvm-svn: 355307
The isScaledConstantInRange function takes upper and lower bounds which are
checked after dividing by the scale, so the bounds checks for half, single and
double precision should all be the same. Previously, we had wrong bounds checks
for half precision, so selected an immediate the instructions can't actually
represent.
Differential revision: https://reviews.llvm.org/D58822
llvm-svn: 355305
Summary:
Before when we implemented the first EH proposal, 'catch <tag>'
instruction may not catch an exception so there were multiple EH pads an
exception can unwind to. That means a BB could have multiple EH pad
successors.
Now after we switched to the new proposal, every 'catch' instruction
catches an exception, and there is only one catchpad per catchswitch, so
we at most have one EH pad successor, making `ThrowUnwindDest` map in
`WasmEHInfo` unnecessary.
Keeping `ThrowUnwindDest` map in `WasmEHInfo` has its own problems,
because other optimization passes can split a BB that contains possibly
throwing calls (previously invokes), and we have to update the map every
time that happens, which is not easy for common CodeGen passes.
This also correctly updates successor info in LateEHPrepare when we add
a rethrow instruction.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58486
llvm-svn: 355296
We were using VPBLENDW for v2i64 and VBLENDPD for v4i64. VPBLENDD has better throughput than VPBLENDW on some CPUs so it makes sense to use it when possible. VBLENDPD will probably become VBLENDD during execution domain fixing, but we might as well use integer in isel while we can.
This should work around some issues with the domain fixing pass prefering PBLENDW when we start with PBLENDW. There may still be some v8i16 cases that could use PBLENDD.
llvm-svn: 355281
Summary:
This prevents crashes in instruction selection when these operations
are used. The tests check that the scalar version of the instruction
is used where applicable, although some expansions do not use the
scalar version.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58859
llvm-svn: 355261
Summary:
This extends the variety of pattern that can generate a SHLD instead of using two shifts.
This fixes a regression that would be introduced by D57367 or D33587
Reviewers: RKSimon, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57389
llvm-svn: 355260
