The new FreeBSDRemote plugin has reached feature parity with the legacy
plugin, so we can finally remove the latter. The new plugin will
be renamed to FreeBSD in a separate commit to avoid confusion.
Differential Revision: https://reviews.llvm.org/D96555
@mstorsjo found a mistake that I made when trying to fix some Windows
compilation errors encountered by @stella.stamenova.
I was incorrectly using the LLVM_ON_UNIX macro. In any case, proper use
of
#if defined(_WIN32)
should be the actual fix.
Differential Revision: https://reviews.llvm.org/D96060
@stella.stamenova found out that lldb-vscode's Win32 macros were failing
when building on windows targetings POSIX platforms.
I'm changing these macros for LLVM_ON_UNIX, which should be more
accurate.
stella.stemenova mentioned in https://reviews.llvm.org/D93951 failures on Windows for this test.
I'm fixing the macro definitions and disabling the tests for python
versions lower than 3.7. I'll figure out that actual issue with
python3.6 after the buildbots are fine again.
Depends on D93874.
runInTerminal was using --wait-for, but it was some problems because it uses process polling looking for a single instance of the debuggee:
- it gets to know of the target late, which renders breakpoints in the main function almost impossible
- polling might fail if there are already other processes with the same name
- polling might also fail on some linux machine, as it's implemented with the ps command, and the ps command's args and output are not standard everywhere
As a better way to implement this so that it works well on Darwin and Linux, I'm using now the following process:
- lldb-vscode notices the runInTerminal, so it spawns lldb-vscode with a special flag --launch-target <target>. This flags tells lldb-vscode to wait to be attached and then it execs the target program. I'm using lldb-vscode itself to do this, because it makes finding the launcher program easier. Also no CMAKE INSTALL scripts are needed.
- Besides this, the debugger creates a temporary FIFO file where the launcher program will write its pid to. That way the debugger will be sure of which program to attach.
- Once attach happend, the debugger creates a second temporary file to notify the launcher program that it has been attached, so that it can then exec. I'm using this instead of using a signal or a similar mechanism because I don't want the launcher program to wait indefinitely to be attached in case the debugger crashed. That would pollute the process list with a lot of hanging processes. Instead, I'm setting a 20 seconds timeout (that's an overkill) and the launcher program seeks in intervals the second tepmorary file.
Some notes:
- I preferred not to use sockets because it requires a lot of code and I only need a pid. It would also require a lot of code when windows support is implemented.
- I didn't add Windows support, as I don't have a windows machine, but adding support for it should be easy, as the FIFO file can be implemented with a named pipe, which is standard on Windows and works pretty much the same way.
The existing test which didn't pass on Linux, now passes.
Differential Revision: https://reviews.llvm.org/D93951
Having this 4MB buffer with a compile-time initialized string forced it
into the DATA section and it took up 4MB of space in the binary, which
accounts for like 80% of debugserver's footprint on disk. Change it to
BSS and strcpy in the initial value at runtime instead.
<rdar://problem/73503892>
lldb-vsdode was communicating the list of modules to the IDE with events, which in practice ended up having some drawbacks
- when debugging large targets, the number of these events were easily 10k, which polluted the messages being transmitted, which caused the following: a harder time debugging the messages, a lag after terminated the process because of these messages being processes (this could easily take several seconds). The latter was specially bad, as users were complaining about it even when they didn't check the modules view.
- these events were rarely used, as users only check the modules view when something is wrong and they try to debug things.
After getting some feedback from users, we realized that it's better to not used events but make this simply a request and is triggered by users whenever they needed.
This diff achieves that and does some small clean up in the existing code.
Differential Revision: https://reviews.llvm.org/D94033
Debugging app launch/attach failures can be difficult because of
all of the messages logged to the console on a darwin system;
emitting specific messages around critical API calls can make it
easier to narrow the search for the console messages related to
the failure.
<rdar://problem/67220442>
Differential revision: https://reviews.llvm.org/D94357
- Remove unused plists that were referenced (but unused) by Xcode.
- Move all debugserver plists unders tools/debugserver/resources.
- Add the ability to distinguish between com.apple.security.cs.debugger
and com.apple.private.cs.debugger.
rdar://66082043
Differential revision: https://reviews.llvm.org/D94320
Add stN aliases for the FPU (stmmN) registers on MacOSX. This should
improve compatibility between MacOSX and other platforms, and partially
fix x86*-fp-write tests without having to duplicate them. Note that
the tests are currently still broken due to ftag incompatibility.
Differential Revision: https://reviews.llvm.org/D91847
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
Kill (rather than detach) form the inferior if debugserver loses its
connection to lldb to prevent zombie processes.
Differential revision: https://reviews.llvm.org/D92908
Use the newly added spawnattr API, posix_spawnattr_setarchpref_np, to
select a slice preferences per cpu and subcpu types, instead of just cpu
with posix_spawnattr_setarchpref_np.
rdar://16094957
Differential revision: https://reviews.llvm.org/D92712
Previously we used UINT16_MAX to mean no port/no specifc
port. This leads to confusion because 65535 is a valid
port number.
Instead use an optional. If you want a specific port call
LaunchGDBServer as normal, otherwise pass an empty optional
and it will be set to the port that gets chosen.
(or left empty in the case where we fail to find a port)
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92035
Previously if you did:
$ lldb-server platform --server <...> --min-gdbserver-port 12346
--max-gdbserver-port 12347
(meaning only use port 12346 for gdbservers)
Then tried to launch two gdbservers on the same connection,
the second one would return port 65535. Which is a real port
number but it actually means lldb-server didn't find one it was
allowed to use.
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1919;port:12346;#c0
<...>
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1927;port:65535;#c7
This situation should be an error even if port 65535 does happen
to be available on the current machine.
To fix this make PortMap it's own class within
GDBRemoteCommunicationServerPlatform.
This almost the same as the old typedef but for
GetNextAvailablePort() returning an llvm::Expected.
This means we have to handle not finding a port,
by returning an error packet.
Also add unit tests for this new PortMap class.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91634
Adds a command line option that makes debugserver propagate the SIGSEGV
signal to the target process.
Motivation: I'm one of the maintainers of Delve [1] a debugger for Go.
We use debugserver as our backend on macOS and one of the most often
reported bugs is that, on macOS, we don't propagate SIGSEGV back to the
target process [2]. Sometimes some programs will actually cause a
SIGSEGV, by design, and then handle it. Those programs can not be
debugged at all.
Since catching signals isn't very important for a Go debugger I'd much
rather have a command line option in debugserver that causes it to let
SIGSEGV go directly to the target process.
[1] https://github.com/go-delve/delve/
[2] https://github.com/go-delve/delve/issues/852
Differential revision: https://reviews.llvm.org/D89315
On x86_64, when you hit a __builtin_debugtrap instruction, you
can continue past this in the debugger. This patch has debugserver
recognize the specific instruction used for __builtin_debugtrap
and advance the pc past it, so that the user can continue execution
once they've hit one of these.
In the patch discussion, we were in agreement that it would be better
to have this knowledge up in lldb instead of depending on each
stub rewriting the pc behind the debugger's back, but that's a
larger scale change for another day.
<rdar://problem/65521634>
Differential revision: https://reviews.llvm.org/D91238
This fixes a reproducer test failure that was caused by the undefined
order in which global destructors run. More concretely, the static
instance of the RealFileSystem had been destroyed before we finalized
the reproducer, which uses it to copy files into the reproducer. By
exiting normally, we call SBDebugger::Terminate and finalize the
reproducer before any static dtors are run.
For performance reasons the reproducers don't copy the files captured by
the file collector eagerly, but wait until the reproducer needs to be
generated.
This is a problematic when LLDB crashes and we have to do all this
signal-unsafe work in the signal handler. This patch uses a similar
trick to clang, which has the driver invoke a new cc1 instance to do all
this work out-of-process.
This patch moves the writing of the mapping file as well as copying over
the reproducers into a separate process spawned when lldb crashes.
Differential revision: https://reviews.llvm.org/D89600
The existing help text was very terse and was missing several important
options. In the new version, I add a short description of each option
and a slightly longer description of the tool as a whole.
The new option list does not include undocumented no-op options:
--debug and --verbose. It also does not include undocumented short
aliases for long options, with two exceptions: -h, because it's
well-known; and -S (--setsid), as it's used in one test. Using these
options will now produce an error. I believe that is acceptable as users
aren't generally invoking lldb-server directly, and the only way to
learn about the short aliases was by looking at the source.
Differential Revision: https://reviews.llvm.org/D89477
the xcode project file for debugserver exists only to make my
life easier when I'm working only on debugserver and don't need
to build the rest of llvm/lldb. It had many build configurations
to reflect our old lldb xcode project file, which is long gone.
Removing them to simplify the configurations.
Specifically dropping CustomSwift-Debug, DebugClang, DebugPresubmission,
CustomSwift-Release, BuildAndIntegration. Keeping Debug & Release.
Link against CarouselServices on watchos, recognize the
WatchComplicationLaunch launch flag option when that framework
is available.
<rdar://problem/62473967>, <rdar://problem/61230088>
Add a new FreeBSD Process plugin using client/server model. This plugin
is based on the one used by NetBSD. It currently supports a subset
of functionality for amd64. It is automatically used when spawning
lldb-server. It can also be used by lldb client by setting
FREEBSD_REMOTE_PLUGIN environment variable (to any value).
The code is capable of debugging simple single-threaded programs. It
supports general purpose, debug and FPU registers (up to XMM) of amd64,
basic signalling, software breakpoints.
Adding the support for the plugin involves removing some dead code
from FreeBSDPlatform plugin (that was not ever used because
CanDebugProcess() returned false), and replacing it with appropriate
code from NetBSD platform support.
Differential Revision: https://reviews.llvm.org/D88796
Per the DAP spec for SetBreakpoints [1], the way to clear breakpoints is: `To clear all breakpoint for a source, specify an empty array.`
However, leaving the breakpoints field unset is also a well formed request (note the `breakpoints?:` in the `SetBreakpointsArguments` definition). If it's unset, we have a couple choices:
1. Crash (current behavior)
2. Clear breakpoints
3. Return an error response that the breakpoints field is missing.
I propose we do (2) instead of (1), and treat an unset breakpoints field the same as an empty breakpoints field.
[1] https://microsoft.github.io/debug-adapter-protocol/specification#Requests_SetBreakpoints
Reviewed By: wallace, labath
Differential Revision: https://reviews.llvm.org/D88513
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
Extract a function for turning `eLaunchFlavorDefault` into a concreate `eLaunchFlavor` value.
This new function encapsulates the few compile time variables involved, and also prevents clang unused code diagnostics.
Differential Revision: https://reviews.llvm.org/D87327
