Summary:
In parallelizeChainedStores, a TokenFactor was created with the size greater than 3000.
We found that DAGCombiner::visitTokenFactor will consume a huge amount of time on
such nodes. Since the number of operands already exceeds TokenFactorInlineLimit, we propose
to give up simplification with the consideration of compile time.
Reviewers:
@spatel, @arsenm
Differential Revision:
https://reviews.llvm.org/D84204
(Disabled under flag for the moment)
This is part of a larger project wherein we are finally integrating lowering of gc live operands with the register allocator. Today, we force spill all operands in SelectionDAG. The code to do so is distinctly non-optimal. The approach this patch is working towards is to instead lower the relocations directly into the MI form, and let the register allocator pick which ones get spilled and which stack slots they get spilled to. In terms of performance, the later part is actually more important as it avoids redundant shuffling of values between stack slots.
This particular change adds ISEL support to produce the variadic def STATEPOINT form required by the above. In particular, the first N are lowered to variadic tied def/use pairs. So new statepoint looks like this:
reloc1,reloc2,... = STATEPOINT ..., base1, derived1<tied-def0>, base2, derived2<tied-def1>, ...
N is limited by the maximal number of tied registers machine instruction can have (15 at the moment).
The current patch is restricted to handling relocations within a single basic block. Cross block relocations (e.g. invokes) are handled via the legacy mechanism. This restriction will be relaxed in future patches.
Patch By: dantrushin
Differential Revision: https://reviews.llvm.org/D81648
Common up some existing MBB name printing logic into a single place.
Note that basic block dumping now prints the same set of attributes as
the MIRPrinter.
Change-Id: I8f022bbd922e831bc96d63143d7472c03282530b
Differential Revision: https://reviews.llvm.org/D83253
Emit DWARF 5 call-site symbols even though DWARF 4 is set,
only in the case of LLDB tuning.
This patch addresses PR46643.
Differential Revision: https://reviews.llvm.org/D83463
PassManager.h is one of the top headers in the ClangBuildAnalyzer frontend worst offenders list.
This exposes a large number of implicit dependencies on various forward declarations/includes in other headers that need addressing.
SONY debugger does not prefer debug entry values feature, so
the plan is to avoid production of the entry values
by default when the tuning is SCE debugger.
The feature still can be enabled with the -debug-entry-values
option for the testing/development purposes.
This patch addresses PR46643.
Differential Revision: https://reviews.llvm.org/D83462
In the included test case the align 16 allowed the v23f32 load to handled as load v16f32, load v4f32, and load v4f32(one element not used). These loads all need to be concatenated together into a final vector. In this case we tried to concatenate the two v4f32 loads to match the type of the v16f32 load so we could do a second concat_vectors, but those loads alone only add up to v8f32. So we need to two v4f32 undefs to pad it.
It appears we've tried to hack around a similar issue in this code before by adding undef padding to loads in one of the earlier loops in this function. Originally in r147964 by padding all loads narrower than previous loads to the same size. Later modifed to only the last load in r293088. This patch removes that earlier code and just handles it on demand where we know we need it.
Fixes PR46820
Differential Revision: https://reviews.llvm.org/D84463
Widen or narrow a type to a type with the same scalar size as
another. This can be used to force G_PTR_ADD/G_PTRMASK's scalar
operand to match the bitwidth of the pointer type. Use this to
disallow narrower types for G_PTRMASK.
This adds the llvm.abs(), llvm.umin(), llvm.umax(), llvm.smin(),
and llvm.smax() intrinsics specified in D81829. For SelectionDAG,
the ISD opcodes and all the legalization and lowering already exist,
so this just wires them up to the intrinsic in the SDAG builder and
adds rudimentary tests. For GlobalISel only the min/max intrinsics
are wired up, as llvm.abs() will require the addition of a G_ABS op,
and corresponding legalization support.
Differential Revision: https://reviews.llvm.org/D84125
Clarify the relation between a block's BlockFrequency and the
getEntryFreq() API, and added an API for the relatively common case of
finding a block's frequency relative to the entrypoint.
Added / moved some comments to header.
Differential Revision: https://reviews.llvm.org/D84357
Add support in LegalizerHelper for lowering G_SADDSAT etc. either
using add/subtract-with-overflow or using max/min instructions.
Enable this lowering for AMDGPU so it can be tested. The legalization
rules are still approximate and skips out on using the clamp bit to
treat these as legal, which has never been used before. This also
doesn't yet try to deal with expanding SALU cases.
Summary: We do this already for output operands, but missed it for (non-tied) input operands.
Reviewers: arsenm, Petar.Avramovic
Reviewed By: arsenm
Subscribers: jvesely, wdng, nhaehnle, rovka, hiraditya, llvm-commits, kerbowa
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83763
On systems where size() doesn't return unsigned long, this leads to an
overloading mismatch. Convert the constant to whatever type is used for
Q.size() on the system.
Currently popFromQueueImpl iterates over all candidates to find the best
one. While the candidate queue is small, this is not a problem. But it
becomes a problem once the queue gets larger. For example, the snippet
below takes 330s to compile with llc -O0, but completes in 3s with this
patch.
define void @test(i4000000* %ptr) {
entry:
store i4000000 0, i4000000* %ptr, align 4
ret void
}
This patch limits the number of candidates to check to 1000. This limit
ensures that it never triggers for test-suite/SPEC2000/SPEC2006 on X86
and AArch64 with -O3, while still drastically limiting the compile-time
in case of very large queues.
It would be even better to use a binary heap to manage to queue
(D83335), but some heuristics change the score of a node in the queue
after another node has been scheduled. I plan to address this for
backends that use the MachineScheduler in the future, but that requires
a more careful evaluation. In the meantime, the limit should help users
impacted by this issue.
The patch includes a slightly smaller version of the motivating example
as test case, to guard against the issue.
Reviewers: efriedma, paquette, niravd
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84328
Test case `test/CodeGen/WebAssembly/stackified-debug.ll`
was failing due to malformed DwarfExpression.
This failure has been seen in lot of bots, for instance in:
http://lab.llvm.org:8011/builders/lld-x86_64-ubuntu-fast/builds/18794
: 'RUN: at line 1'
/home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/build/bin/llc
/home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/build/bin/FileCheck /home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/llvm-project/llvm/test/CodeGen/WebAssembly/stackified-debug.ll
home/buildbot/as-builder-4/lld-x86_64-ubuntu-fast/llvm-project/llvm/test/CodeGen/WebAssembly/stackified-debug.ll:26:10: error: CHECK: expected string not found in input
CHECK: .int16 4 # Loc expr size
^
<stdin>:34:2: note: scanning from here
.int16 3 # Loc expr size
Differential Revision: https://reviews.llvm.org/D83560
This patch was reverted in 9d2da6759b4d due to assertion failure seen
in `test/DebugInfo/Sparc/subreg.ll`. Assertion failure was happening
due to malformed/unhandeled DwarfExpression.
Differential Revision: https://reviews.llvm.org/D83560
Summary:
llvm is missing support for DW_OP_implicit_value operation.
DW_OP_implicit_value op is indispensable for cases such as
optimized out long double variables.
For intro refer: DWARFv5 Spec Pg: 40 2.6.1.1.4 Implicit Location Descriptions
Consider the following example:
```
int main() {
long double ld = 3.14;
printf("dummy\n");
ld *= ld;
return 0;
}
```
when compiled with tunk `clang` as
`clang test.c -g -O1` produces following location description
of variable `ld`:
```
DW_AT_location (0x00000000:
[0x0000000000201691, 0x000000000020169b): DW_OP_constu 0xc8f5c28f5c28f800, DW_OP_stack_value, DW_OP_piece 0x8, DW_OP_constu 0x4000, DW_OP_stack_value, DW_OP_bit_piece 0x10 0x40, DW_OP_stack_value)
DW_AT_name ("ld")
```
Here one may notice that this representation is incorrect(DWARF4
stack could only hold integers(and only up to the size of address)).
Here the variable size itself is `128` bit.
GDB and LLDB confirms this:
```
(gdb) p ld
$1 = <invalid float value>
(lldb) frame variable ld
(long double) ld = <extracting data from value failed>
```
GCC represents/uses DW_OP_implicit_value in these sort of situations.
Based on the discussion with Jakub Jelinek regarding GCC's motivation
for using this, I concluded that DW_OP_implicit_value is most appropriate
in this case.
Link: https://gcc.gnu.org/pipermail/gcc/2020-July/233057.html
GDB seems happy after this patch:(LLDB doesn't have support
for DW_OP_implicit_value)
```
(gdb) p ld
p ld
$1 = 3.14000000000000012434
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83560
Summary: These should have half float as the element type
Reviewers: cameron.mcinally, efriedma, sdesmalen, paulwalker-arm
Reviewed By: paulwalker-arm
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84211
This is an alternative proposal to D81476 (and D82084) - the details were sufficiently confusing to me it seemed easier to write some code and see how it looks.
Reviewers: SouraVX
Differential Revision: https://reviews.llvm.org/D84278
This was structured in a way that implied every split argument is in
memory, or in registers. It is possible to pass an original argument
partially in registers, and partially in memory. Transpose the logic
here to only consider a single piece at a time. Every individual
CCValAssign should be treated independently, and any merge to original
value needs to be handled later.
This is in preparation for merging some preprocessing hacks in the
AMDGPU calling convention lowering into the generic code.
I'm also not sure what the correct behavior for memlocs where the
promoted size is larger than the original value. I've opted to clamp
the memory access size to not exceed the value register to avoid the
explicit trunc/extend/vector widen/vector extract instruction. This
happens for AMDGPU for i8 arguments that end up stack passed, which
are promoted to i16 (I think this is a preexisting DAG bug though, and
they should not really be promoted when in memory).
Summary:
AIX assembly's .set directive is not usable for aliasing purpose.
We need to use extra-label-at-defintion strategy to generate symbol
aliasing on AIX.
Reviewed By: DiggerLin, Xiangling_L
Differential Revision: https://reviews.llvm.org/D83252
Summary:
This patch reduces file size in debug builds by dropping variable locations a
debugger user will not see.
After building the debug entity history map we loop through it. For each
variable we look at each entry. If the entry opens a location range which does
not intersect any of the variable's scope's ranges then we mark it for removal.
After visiting the entries for each variable we also mark any clobbering
entries which will no longer be referenced for removal, and then finally erase
the marked entries. This all requires the ability to query the order of
instructions, so before this runs we number them.
Tests:
Added llvm/test/DebugInfo/X86/trim-var-locs.mir
Modified llvm/test/DebugInfo/COFF/register-variables.ll
Branch folding merges the tails of if.then and if.else into if.else. Each
blocks' debug-locations point to different scopes so when they're merged we
can't use either. Because of this the variable 'c' ends up with a location
range which doesn't cover any instructions in its scope; with the patch
applied the location range is dropped and its flag changes to IsOptimizedOut.
Modified llvm/test/DebugInfo/X86/live-debug-variables.ll
Modified llvm/test/DebugInfo/ARM/PR26163.ll
In both tests an out of scope location is now removed. The remaining location
covers the entire scope of the variable allowing us to emit it as a single
location.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D82129
There are a few questionable things about this intrinsic and existing
DAG implementation. For some reason the intrinsic hardcodes the second
operand to be scalar-only i32, and SelectionDAG builder makes a
legalization decision based on whether the operand is constant.
The AMDGPU handling of f16 vectors is terrible still since it gets
scalarized even when the vector operation is legal.
The code is is essentially duplicated between the non-strict and
strict case. Apparently no other expansions are currently trying to do
this. This is mostly because I found the behavior of
getStrictFPOperationAction to be confusing. In the ARM case, it would
expand strict_fsub even though it shouldn't due to the later check. At
that point, the logic required to check for legality was more complex
than just duplicating the 2 instruction expansion.
Current tail duplication in machine block placement pass uses block frequency
information in cost model. But frequency number has only relative meaning
compared to other basic blocks in the same function. A large frequency number
doesn't mean it is hot and a small frequency number doesn't mean it is cold.
To overcome this problem, this patch uses profile count in cost model if it's
available. So we can tail duplicate real hot basic blocks.
Differential Revision: https://reviews.llvm.org/D83265
Try to make the behavior more consistent with getGCDType, and bias
towards returning something closer to the source type whenever there's
an ambiguity.
Try harder to find a canonical unmerge type when trying to cover the
desired target type. Handle finding a compatible unmerge type for two
vectors with different element types. This will return the largest
multiple of the source vector element that will evenly divide the
target vector type.
Also make the handling mixing scalars and vectors, and prefer the
source element type as the unmerge target type.
This isn't a natively supported operation, so convert it to a
mask+compare.
In addition to the operation itself, fix up some surrounding stuff to
make the testcase work: we need concat_vectors on i1 vectors, we need
legalization of i1 vector truncates, and we need to fix up all the
relevant uses of getVectorNumElements().
Differential Revision: https://reviews.llvm.org/D83811
