Fold shuffle(bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))) -> bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))
Attempt to fold from a shuffle of a pair of binops to a binop of shuffles, as long as one/both of the binop sources are also shuffles that can be merged with the outer shuffle. This should guarantee that we remove one binop without introducing any additional shuffles.
Technically there's potential for a merged shuffle's lowering to be poorer than the original shuffle, but it could also be better, and I'm not seeing any regressions as long as we keep the 'don't merge splats' rule already present in MergeInnerShuffle.
This expands and generalizes an existing X86 combine and attempts to merge either of each binop's sources (with an on-the-fly commutation of the shuffle mask) - we couldn't do that in the x86 version as it had to stay in a form that DAGCombine's MergeInnerShuffle would still recognise.
Fixes issue raised by @saugustine in rG5aa8f4c0843a where we were failing to replace null shuffle operands from MergeInnerShuffle to UNDEFs.
Differential Revision: https://reviews.llvm.org/D96345
This reverts commit 5dfba562dd247f731528448ee83785b099f93629.
That commit causes an assertion failure with the following repro:
typedef long b __attribute__((__vector_size__(16)));
b *d;
b e;
b __attribute__((__always_inline__)) c(b h, b i) {
return (__attribute__((__vector_size__(8 * sizeof(short)))) short)h + i;
}
j() {
b k, l, m, n, o[6], p, q;
m = d[5];
b r = m;
b s = f(r, 8);
q = s;
l = d[1];
p = l;
t(q);
n = c(m, l);
o[1] = c(s, f(p, 8));
k = __builtin_shufflevector(n, o[1], 0, 2);
e = __builtin_ia32_psrlwi128(k, j);
}
./bin/clang -cc1 -triple x86_64-grtev4-linux-gnu -emit-obj -O1 -std=c99 test.c
Fold shuffle(bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))) -> bop(shuffle(x,y),shuffle(z,w)),bop(shuffle(a,b),shuffle(c,d))
Attempt to fold from a shuffle of a pair of binops to a binop of shuffles, as long as one/both of the binop sources are also shuffles that can be merged with the outer shuffle. This should guarantee that we remove one binop without introducing any additional shuffles.
Technically there's potential for a merged shuffle's lowering to be poorer than the original shuffle, but it could also be better, and I'm not seeing any regressions as long as we keep the 'don't merge splats' rule already present in MergeInnerShuffle.
This expands and generalizes an existing X86 combine and attempts to merge either of each binop's sources (with an on-the-fly commutation of the shuffle mask) - we couldn't do that in the x86 version as it had to stay in a form that DAGCombine's MergeInnerShuffle would still recognise.
Differential Revision: https://reviews.llvm.org/D96345
In the future Windows will enable Control-flow Enforcement Technology (CET aka shadow stacks). To protect the path where the context is updated during exception handling, the binary is required to enumerate valid unwind entrypoints in a dedicated section which is validated when the context is being set during exception handling.
This change allows llvm to generate the section that contains the appropriate symbol references in the form expected by the msvc linker.
This feature is enabled through a new module flag, ehcontguard, which was modelled on the cfguard flag.
The change includes a test that when the module flag is enabled the section is correctly generated.
The set of exception continuation information includes returns from exceptional control flow (catchret in llvm).
In order to collect catchret we:
1) Includes an additional flag on machine basic blocks to indicate that the given block is the target of a catchret operation,
2) Introduces a new machine function pass to insert and collect symbols at the start of each block, and
3) Combines these targets with the other EHCont targets that were already being collected.
Change originally authored by Daniel Frampton <dframpto@microsoft.com>
For more details, see MSVC documentation for `/guard:ehcont`
https://docs.microsoft.com/en-us/cpp/build/reference/guard-enable-eh-continuation-metadata
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D94835
Begin transitioning the X86 vector code to recognise sub(umax(a,b) ,b) or sub(a,umin(a,b)) USUBSAT patterns to make it more generic and available to all targets.
This initial patch just moves the basic umin/umax patterns to DAG, removing some vector-only checks on the way - these are some of the patterns that the legalizer will try to expand back to so we can be reasonably relaxed about matching these pre-legalization.
We can handle the trunc(sub(..))) variants as well, which helps with patterns where we were promoting to a wider type to detect overflow/saturation.
The remaining x86 code requires some cleanup first - some of it isn't actually tested etc. I also need to resurrect D25987.
Differential Revision: https://reviews.llvm.org/D96413
The vector reduction intrinsics started life as experimental ops, so backend support
was lacking. As part of promoting them to 1st-class intrinsics, however, codegen
support was added/improved:
D58015
D90247
So I think it is safe to now remove this complication from IR.
Note that we still have an IR-level codegen expansion pass for these as discussed
in D95690. Removing that is another step in simplifying the logic. Also note that
x86 was already unconditionally forming reductions in IR, so there should be no
difference for x86.
I spot checked a couple of the tests here by running them through opt+llc and did
not see any asm diffs.
If we do find functional differences for other targets, it should be possible
to (at least temporarily) restore the shuffle IR with the ExpandReductions IR
pass.
Differential Revision: https://reviews.llvm.org/D96552
This removes the commuted PatFrags that only existed to carry
an SDNodeXForm in its OperandTransform field. We know all the places
that need to use the commuted SDNodeXForm and there is one transform
shared by signed and unsigned compares. So just hardcode the
the SDNodeXForm where it is needed and use the non commuted PatFrag
in the pattern.
I think when I wrote this I thought the SDNodeXForm name had to
match what is in the PatFrag that is being used. But that's not
true. The OperandTransform is only used when the PatFrag is used
in an instruction pattern and not a separate Pat pattern. All
the commuted cases are Pat patterns.
This was taking the calling convention from the parent function,
instead of the callee. Avoids regressions in a future patch when the
caller and callee have different type breakdowns.
For some reason AArch64's lowerFormalArguments seems to intentionally
ignore the parent isVarArg.
Fold shufps(hop(x,y),hop(z,w)) -> permute(hop(x,z)) - this is very similar to the equivalent unpack fold.
I did start trying to convert foldShuffleOfHorizOp to handle generic shuffle masks but we're relying on a lot of special cases at the moment.
I don't think we have any reason to believe the FP_ROUND here doesn't change the value.
Found while trying to see if we still need the fp128 block in CanCombineFCOPYSIGN_EXTEND_ROUND.
Removing that check caused this FP_ROUND to fire for fp128 which introduced a libcall expansion that asserted for this being a 1.
Reviewed By: RKSimon, pengfei
Differential Revision: https://reviews.llvm.org/D96098
Now that PR48908 has been dealt with, we can handle v4f64 permute cases by extracting the low/high lane VPERMILPD masks and creating a new mask based on which lanes are referenced by the VPERM2F128 mask.
loadRegFromStackSlot()/storeRegToStackSlot() can generate aligned access
instructions for stack slots even if the stack is unaligned, based on the
assumption that the stack can be realigned.
However, this doesn't work for fixed slots, which are e.g. used for
spilling XMM registers in a non-leaf function with
`__attribute__((preserve_all))`.
When compiling such code with `-mstack-alignment=8`, this causes general
protection faults.
Fix it by only considering stack realignment for non-fixed slots.
Note that this changes the output of three existing tests which spill AVX
registers, since AVX requires higher alignment than the ABI provides on
stack frame entry.
Reviewed By: rnk, jyknight
Differential Revision: https://reviews.llvm.org/D73126
Extends D95779 to permit insertion into float/doubles vectors while avoiding a lot of aliased memory traffic.
The scalar value is already on the simd unit, so we only need to transfer and splat the index value, then perform the select.
SSE4 codegen is a little bulky due to the tied register requirements of (non-VEX) BLENDPS/PD but the extra moves are cheap so shouldn't be an actual problem.
Differential Revision: https://reviews.llvm.org/D95866
With predicate masks, AVX512 can efficiently perform variable-index vector insertion with 2 broadcasts + 1 comparison, avoiding a lot of aliased memory traffic.
Differential Revision: https://reviews.llvm.org/D95779
For x86-64 the REX.w prefix takes precedence over any other size
override (i.e. 0x66). Therefore, for x86-64 when REX.w is present set
'hasOpSize' to false to ensure that any size override is ignored.
Fixes PR48901.
Differential Revision: https://reviews.llvm.org/D95682
This is directly analogous to the existing no_caller_saved_registers, but with the opposite intention. A function or call so marked shifts the responsibility of spilling the usual CSRs to it's caller.
An indirect call site and callee which don't agree on the attribute is ill defined.
The motivation for this change is that being able to prune callee saves (without modifying other details of the calling convention) is sometimes useful when generating stubs and adapters. There's no intention to expose this as a source language feature; this is expected to be used by frontends to implement adapters where warranted.
Some specific examples of use cases:
* GC compatible compiled code wants to call an externally defined library function without needing to track pointer values through CSRs.
* debug enabled code wants to call precompiled library which doesn't provide enough information to track CSRs while preserving debug quality in caller.
* adapter stub entering hand written assembler which doesn't follow normal calling conventions.
This is consistent with the VEX version. It also fixes a sorting
issue in the matching table that caused the EVEX version to be
prioritized over VEX in intel syntax.
Fixes issue [2] from PR48991.
We can only legally extract from the lowest 128-bit subvector, so extract the correct subvector to allow us to handle 256/512-bit vector element extracts.
This is an optimized approach for D94155.
Previous code build the model that tile config register is the user of
each AMX instruction. There is a problem for the tile config register
spill. When across function, the ldtilecfg instruction may be inserted
on each AMX instruction which use tile config register. This cause all
tile data register clobber.
To fix this issue, we remove the model of tile config register. Instead,
we analyze the AMX instructions between one call to another. We will
insert ldtilecfg after the first call if we find any AMX instructions.
Reviewed By: LuoYuanke
Differential Revision: https://reviews.llvm.org/D95136
If the shuffle mask can't be widened to match the original extracted element width, see if the upper bits are zeroable - which allows us to extract+zero-extend the smaller extraction.
This patch allows targets to define multiple cost
values for each register so that the cost model
can be more flexible and better used during the
register allocation as per the target requirements.
For AMDGPU the VGPR allocation will be more efficient
if the register cost can be associated dynamically
based on the calling convention.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D86836
Ensure we check the valuetypes of all the HOP(SHUFFLE(X,Y),SHUFFLE(X,Y)) shuffle input ops - there was a copy+paste typo (noticed by MSVC analyzer) that meant we were checking the same input from one of the shuffles twice.
I haven't been able to create a test case for this yet - I don't think its currently possible to create a target/faux binary shuffle that scales to a 2x128 shuffle mask from two different value types.
Unlike VPERMILPS, VPERMILPD can have non-repeating masks in each 128-bit subvector, we weren't accounting for this when folding vperm2f128(vpermilpd(x,c),vpermilpd(y,c)) -> vpermilpd(vperm2f128(x,y),c).
I'm intending to add support for this but wanted to get a minimal fix in first for merging into 12.xx.
Fixes PR48908
Revert the change to use APInt::isSignedIntN from
5ff5cf8e057782e3e648ecf5ccf1d9990b53ee90.
Its clear that the games we were playing to avoid the topological
sort aren't working. So just fix it once and for all.
Fixes PR48888.
The unwind info format requires that all adjustments are 8 byte aligned,
and the bottom three bits are masked out. Most Win64 calling conventions
have 32 bytes of shadow stack space for spilling parameters, and I
believe that constructing these fixed stack objects had the side effect
of ensuring an alignment of 8. However, the Intel regcall convention
does not have this shadow space, so when using that convention, it was
possible to make a 4 byte stack frame, which was impossible to describe
with unwind info.
Fixes pr48867
We're relying on the source inputs for shuffle combining having already been widened to the root size (otherwise the offset logic falls over) - we're going to be supporting different sized shuffle inputs soon, so we need to explicitly make the minimum widened width the original root size.
We allow insert_subvector lowering of all legal types, so don't always cast to the vXi64/vXf64 shuffle types - this is only necessary for X86ISD::SHUF128/X86ISD::VPERM2X128 patterns later.
