Support for XNACK and SRAMECC is not static on some GPUs. We must be able
to differentiate between different scenarios for these dynamic subtarget
features.
The possible settings are:
- Unsupported: The GPU has no support for XNACK/SRAMECC.
- Any: Preference is unspecified. Use conservative settings that can run anywhere.
- Off: Request support for XNACK/SRAMECC Off
- On: Request support for XNACK/SRAMECC On
GCNSubtarget will track the four options based on the following criteria. If
the subtarget does not support XNACK/SRAMECC we say the setting is
"Unsupported". If no subtarget features for XNACK/SRAMECC are requested we
must support "Any" mode. If the subtarget features XNACK/SRAMECC exist in the
feature string when initializing the subtarget, the settings are "On/Off".
The defaults are updated to be conservatively correct, meaning if no setting
for XNACK or SRAMECC is explicitly requested, defaults will be used which
generate code that can be run anywhere. This corresponds to the "Any" setting.
Differential Revision: https://reviews.llvm.org/D85882
Change waitcnt insertion to check the memory operand tokens to see if
flat memory operations access VMEM in the same way it does to check if
accessing LDS. This avoids adding waitcnt for counters for address
spaces that are not accessed.
In addition, only generate the pessimistic waitcnt 0 if a flat memory
operation appears to access both VMEM and LDS.
This benefits flat memory operations that explicitly specify the
address space as GLOBAL or LOCAL.
Differential Revision: https://reviews.llvm.org/D89618
The previous implementation was incorrect, and based off incorrect
instruction definitions. Unfortunately we can't match natural
addressing in a lot of cases due to the shift/scale applied in
getelementptrs. This relies on reducing the 64-bit shift to 32-bits.
tryLatency compares two sched candidates. For the top zone it prefers
the one with lesser depth, but only if that depth is greater than the
total latency of the instructions we've already scheduled -- otherwise
its latency would be hidden and there would be no stall.
Unfortunately it only tests the depth of one of the candidates. This can
lead to situations where the TopDepthReduce heuristic does not kick in,
but a lower priority heuristic chooses the other candidate, whose depth
*is* greater than the already scheduled latency, which causes a stall.
The fix is to apply the heuristic if the depth of *either* candidate is
greater than the already scheduled latency.
All this also applies to the BotHeightReduce heuristic in the bottom
zone.
Differential Revision: https://reviews.llvm.org/D72392
Summary:
pickNodeBidirectional tried to compare the best top candidate and the
best bottom candidate by examining TopCand.Reason and BotCand.Reason.
This is unsound because, after calling pickNodeFromQueue, Cand.Reason
does not reflect the most important reason why Cand was chosen. Rather
it reflects the most recent reason why it beat some other potential
candidate, which could have been for some low priority tie breaker
reason.
I have seen this cause problems where TopCand is a good candidate, but
because TopCand.Reason is ORDER (which is very low priority) it is
repeatedly ignored in favour of a mediocre BotCand. This is not how
bidirectional scheduling is supposed to work.
To fix this I changed the code to always compare TopCand and BotCand
directly, like the generic implementation of pickNodeBidirectional does.
This removes some uncommented AMDGPU-specific logic; if this logic turns
out to be important then perhaps it could be moved into an override of
tryCandidate instead.
Graphics shader benchmarking on gfx10 shows a lot more positive than
negative effects from this change.
Reviewers: arsenm, tstellar, rampitec, kzhuravl, vpykhtin, dstuttard, tpr, atrick, MatzeB
Subscribers: jvesely, wdng, nhaehnle, yaxunl, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68338
We are relying on atrificial DAG edges inserted by the
MemOpClusterMutation to keep loads and stores together in the
post-RA scheduler. This does not work all the time since it
allows to schedule a completely independent instruction in the
middle of the cluster.
Removed the DAG mutation and added pass to bundle already
clustered instructions. These bundles are unpacked before the
memory legalizer because it does not work with bundles but also
because it allows to insert waitcounts in the middle of a store
cluster.
Removing artificial edges also allows a more relaxed scheduling.
Differential Revision: https://reviews.llvm.org/D72737
As detailed in https://blog.regehr.org/archives/1709 we don't make use of the known leading/trailing zeros for shifted values in cases where we don't know the shift amount value.
This patch adds support to SelectionDAG::ComputeKnownBits to use KnownBits::countMinTrailingZeros and countMinLeadingZeros to set the minimum guaranteed leading/trailing known zero bits.
Differential Revision: https://reviews.llvm.org/D72573
This replaces most argument uses with loads, but for
now not all.
The code in SelectionDAG for calling convention lowering
is actively harmful for amdgpu_kernel. It attempts to
split the argument types into register legal types, which
results in low quality code for arbitary types. Since
all kernel arguments are passed in memory, we just want the
raw types.
I've tried a couple of methods of mitigating this in SelectionDAG,
but it's easier to just bypass this problem alltogether. It's
possible to hack around the problem in the initial lowering,
but the real problem is the DAG then expects to be able to use
CopyToReg/CopyFromReg for uses of the arguments outside the block.
Exposing the argument loads in the IR also has the advantage
that the LoadStoreVectorizer can merge them.
I'm not sure the best approach to dealing with the IR
argument list is. The patch as-is just leaves the IR arguments
in place, so all the existing code will still compute the same
kernarg size and pointlessly lowers the arguments.
Arguably the frontend should emit kernels with an empty argument
list in the first place. Alternatively a dummy array could be
inserted as a single argument just to reserve space.
This does have some disadvantages. Local pointer kernel arguments can
no longer have AssertZext placed on them as the equivalent !range
metadata is not valid on pointer typed loads. This is mostly bad
for SI which needs to know about the known bits in order to use the
DS instruction offset, so in this case this is not done.
More importantly, this skips noalias arguments since this pass
does not yet convert this to the equivalent !alias.scope and !noalias
metadata. Producing this metadata correctly seems to be tricky,
although this logically is the same as inlining into a function which
doesn't exist. Additionally, exposing these loads to the vectorizer
may result in degraded aliasing information if a pointer load is
merged with another argument load.
I'm also not entirely sure this is preserving the current clover
ABI, although I would greatly prefer if it would stop widening
arguments and match the HSA ABI. As-is I think it is extending
< 4-byte arguments to 4-bytes but doesn't align them to 4-bytes.
llvm-svn: 335650
This has two main components. First, widen
widen short constant loads in DAG when they have
the correct alignment. This is already done a bit in
AMDGPUCodeGenPrepare, since that has access to
DivergenceAnalysis. This can't help kernarg loads
created in the DAG. Start to use DAG divergence analysis
to help this case.
The second part is to avoid kernel argument lowering
breaking the alignment of short vector elements because
calling convention lowering wants to split everything
into legal register types.
When loading a split type, load the nearest 4-byte aligned
segment and shift to get the desired bits. This extra
load of the earlier argument piece ends up merging,
and the bit extract hopefully folds out.
There are a number of improvements and regressions with
this, but I think as-is this is a better compromise between
several of the worst parts of SelectionDAG.
Particularly when i16 is legal, this produces worse code
for i8 and i16 element vector kernel arguments. This is
partially due to the very weak load merging the DAG does.
It only looks for fairly specific combines between pairs
of loads which no longer appear. In particular this
causes v4i16 loads to be split into 2 components when
previously the two halves were merged.
Worse, because of the newly introduced shifts, there
is a lot more unnecessary vector packing and unpacking code
emitted. At least some of this is due to reporting
false for isTypeDesirableForOp for i16 as a workaround for
the lack of divergence information in the DAG. The cases
where this happens it doesn't actually matter, but the
relevant code in SimplifyDemandedBits doens't have the context
to know to ignore this.
The use of the scalar cache is probably more important
than the mess of mostly scalar instructions doing this packing
and unpacking. Future work can fix this, possibly by making better
use of the new DAG divergence information for controlling promotion
decisions, or adding another version of shift + trunc + shift
combines that doesn't only know about the used types.
llvm-svn: 334180
This usually results in better code. Fixes using
inline asm with short2, and also fixes having a different
ABI for function parameters between VI and gfx9.
Partially cleans up the mess used for lowering of the d16
operations. Making v4f16 legal will help clean this up more,
but this requires additional work.
llvm-svn: 332953
Use VOP3 add/addc like usual.
This has some tradeoffs. Inline immediates fold
a little better, but other constants are worse off.
SIShrinkInstructions could be made smarter to handle
these cases.
This allows us to avoid selecting scalar adds where we
need to track the carry in scc and replace its users.
This makes it easier to use the carryless VALU adds.
llvm-svn: 318340
The pre-RA scheduler does load/store clustering, but post-RA
scheduler undoes it. Add mutation to prevent it.
Differential Revision: https://reviews.llvm.org/D38014
llvm-svn: 313670
Currently the default C calling convention functions are treated
the same as compute kernels. Make this explicit so the default
calling convention can be changed to a non-kernel.
Converted with perl -pi -e 's/define void/define amdgpu_kernel void/'
on the relevant test directories (and undoing in one place that actually
wanted a non-kernel).
llvm-svn: 298444
