17 Commits

Author SHA1 Message Date
Craig Topper
3dae6347da Recommit r368079 "[X86] Remove uses of the -x86-experimental-vector-widening-legalization flag from test/CodeGen/X86/"
llvm-svn: 368184
2019-08-07 16:33:37 +00:00
Craig Topper
8b5f2ab2a4 Recommit r367901 "[X86] Enable -x86-experimental-vector-widening-legalization by default."
The assert that caused this to be reverted should be fixed now.

Original commit message:

This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.

This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.

Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.

llvm-svn: 368183
2019-08-07 16:24:26 +00:00
Mitch Phillips
bd0d97e1c4 Revert "[X86] Enable -x86-experimental-vector-widening-legalization by default."
This reverts commit 3de33245d2c992c9e0af60372043540b60f3a810.

This commit broke the MSan buildbots. See
https://reviews.llvm.org/rL367901 for more information.

llvm-svn: 368107
2019-08-06 23:00:43 +00:00
Mitch Phillips
2f908c1436 Revert "[X86] Remove uses of the -x86-experimental-vector-widening-legalization flag from test/CodeGen/X86/"
This reverts commit 3f572c7b8405f36993ec8a226dcddd57283a7c1e.

The MSan sanitizer buildbot was broken by rL367901. This commit
(rL368079) depends on the broken commit that need to be reverted, and
thus itself is being reverted.

See https://reviews.llvm.org/rL367901 for more information.

llvm-svn: 368106
2019-08-06 23:00:30 +00:00
Craig Topper
3f572c7b84 [X86] Remove uses of the -x86-experimental-vector-widening-legalization flag from test/CodeGen/X86/
This flag is now the default behavior so we no longer need to
set it in tests.

Some redundant tests have been removed after verifying we have
an equivalent test that didn't use the flag.

llvm-svn: 368079
2019-08-06 20:12:20 +00:00
Craig Topper
3de33245d2 [X86] Enable -x86-experimental-vector-widening-legalization by default.
This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.

This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.

Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.

llvm-svn: 367901
2019-08-05 18:25:36 +00:00
Francis Visoiu Mistrih
25528d6de7 [CodeGen] Unify MBB reference format in both MIR and debug output
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.

The MIR printer prints the IR name of a MBB only for block definitions.

* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix

Differential Revision: https://reviews.llvm.org/D40422

llvm-svn: 319665
2017-12-04 17:18:51 +00:00
Ayman Musa
d9fb157845 [X86][SSE2] Fix asm string for movq (Move Quadword) instruction.
Replace "mov{d|q}" with "movq".

Differential Revision: https://reviews.llvm.org/D32220

llvm-svn: 301386
2017-04-26 07:08:44 +00:00
Simon Pilgrim
e940daf532 [X86][SSE] Add support for combining target shuffles to SHUFPS.
As discussed on D27692, the next step will be to allow cross-domain shuffles once the combined shuffle depth passes a certain point.

llvm-svn: 290064
2016-12-18 14:26:02 +00:00
Simon Pilgrim
a64d4dc22f [X86] Regenerate vector bitcast/widening tests.
llvm-svn: 289443
2016-12-12 16:15:45 +00:00
Alexey Samsonov
533948088e Revert "[x86] Combine x86mmx/i64 to v2i64 conversion to use scalar_to_vector"
This reverts commits r226953 and r226974.

llvm-svn: 227248
2015-01-27 21:34:11 +00:00
Bruno Cardoso Lopes
56567f9135 [x86] Combine x86mmx/i64 to v2i64 conversion to use scalar_to_vector
Handle the poor codegen for i64/x86xmm->v2i64 (%mm -> %xmm) moves. Instead of
using stack store/load pair to do the job, use scalar_to_vector directly, which
in the MMX case can use movq2dq. This was the current behavior prior to
improvements for vector legalization of extloads in r213897.

This commit fixes the regression and as a side-effect also remove some
unnecessary shuffles.

In the new attached testcase, we go from:

pshufw  $-18, (%rdi), %mm0
movq    %mm0, -8(%rsp)
movq    -8(%rsp), %xmm0
pshufd  $-44, %xmm0, %xmm0
movd    %xmm0, %eax
...

To:

pshufw  $-18, (%rdi), %mm0
movq2dq %mm0, %xmm0
movd    %xmm0, %eax
...

Differential Revision: http://reviews.llvm.org/D7126
rdar://problem/19413324

llvm-svn: 226953
2015-01-23 22:44:16 +00:00
Chandler Carruth
9f4530b95d [SDAG] Introduce a combined set to the DAG combiner which tracks nodes
which have successfully round-tripped through the combine phase, and use
this to ensure all operands to DAG nodes are visited by the combiner,
even if they are only added during the combine phase.

This is critical to have the combiner reach nodes that are *introduced*
during combining. Previously these would sometimes be visited and
sometimes not be visited based on whether they happened to end up on the
worklist or not. Now we always run them through the combiner.

This fixes quite a few bad codegen test cases lurking in the suite while
also being more principled. Among these, the TLS codegeneration is
particularly exciting for programs that have this in the critical path
like TSan-instrumented binaries (although I think they engineer to use
a different TLS that is faster anyways).

I've tried to check for compile-time regressions here by running llc
over a merged (but not LTO-ed) clang bitcode file and observed at most
a 3% slowdown in llc. Given that this is essentially a worst case (none
of opt or clang are running at this phase) I think this is tolerable.
The actual LTO case should be even less costly, and the cost in normal
compilation should be negligible.

With this combining logic, it is possible to re-legalize as we combine
which is necessary to implement PSHUFB formation on x86 as
a post-legalize DAG combine (my ultimate goal).

Differential Revision: http://reviews.llvm.org/D4638

llvm-svn: 213898
2014-07-24 22:15:28 +00:00
NAKAMURA Takumi
254bd27ce2 Let llvm/test/CodeGen/X86/lower-bitcast.ll tolerant of win32 calling convention.
llvm-svn: 212258
2014-07-03 07:25:00 +00:00
Chandler Carruth
739b6ada99 [x86] Fix crashes in lowering bitcast instructions with the widening
mode.

This also runs the test in that mode which would reproduce the crash.
What I love is that *every single FIXME* in the test is addressed by
switching to widening.

llvm-svn: 212254
2014-07-03 03:43:47 +00:00
Andrea Di Biagio
446a527905 [X86] Add two combine rules to simplify dag nodes introduced during type legalization when promoting nodes with illegal vector type.
This patch teaches the backend how to simplify/canonicalize dag node
sequences normally introduced by the backend when promoting certain dag nodes
with illegal vector type.

This patch adds two new combine rules:
1) fold (shuffle (bitcast (BINOP A, B)), Undef, <Mask>) ->
        (shuffle (BINOP (bitcast A), (bitcast B)), Undef, <Mask>)

2) fold (BINOP (shuffle (A, Undef, <Mask>)), (shuffle (B, Undef, <Mask>))) ->
        (shuffle (BINOP A, B), Undef, <Mask>).

Both rules are only triggered on the type-legalized DAG.
In particular, rule 1. is a target specific combine rule that attempts
to sink a bitconvert into the operands of a binary operation.
Rule 2. is a target independet rule that attempts to move a shuffle
immediately after a binary operation.

llvm-svn: 209930
2014-05-30 23:17:53 +00:00
Andrea Di Biagio
c8dd1ad85b [X86] Improve the lowering of BITCAST from MVT::f64 to MVT::v4i16/MVT::v8i8.
This patch teaches the x86 backend how to efficiently lower ISD::BITCAST dag
nodes from MVT::f64 to MVT::v4i16 (and vice versa), and from MVT::f64 to
MVT::v8i8 (and vice versa).

This patch extends the logic from revision 208107 to also handle MVT::v4i16
and MVT::v8i8. Also, this patch correctly propagates Undef values when
performing the widening of a vector (example: when widening from v2i32 to
v4i32, the upper 64bits of the resulting vector are 'undef').

llvm-svn: 209451
2014-05-22 16:21:39 +00:00