This uses the shiftop PatFrags to handle the masked shift amount
and unmasked shift amount cases. That also checks XLen as part
of the masked amount check so we don't need separate RV32 and RV64
patterns.
Differential Revision: https://reviews.llvm.org/D91016
FastISel generates instructions to materialize "local values" at the
top of a block, in the hope that these values could be reused within
the block. To reduce spills and restores, FastISel treats calls as
sub-block boundaries, flushing the "local value map" at each call.
This patch treats the mem* intrinsics as if they were calls, because
at O0 generally they are calls. Eliminating these spills/restores is
actually better for debugging (especially a "continue at this line"
command), code size, stack frame size, and maybe even performance.
Differential Revision: https://reviews.llvm.org/D90877
Add a calling convention called amdgpu_gfx for real function calls
within graphics shaders. For the moment, this uses the same calling
convention as other calls in amdgpu, with registers excluded for return
address, stack pointer and stack buffer descriptor.
Differential Revision: https://reviews.llvm.org/D88540
This to help review the impact of https://reviews.llvm.org/D89952 which
allows targets to fine tune what SelectionDAG does when vector CTPOP is
not legal.
This patch make the outliner emit CFI instructions in a few more
places:
* after LR is restored, but before the return in an outlined
function
* around save/restore of LR to/from a register at calls to outlined
functions
* around save/restore of LR to/from the stack at calls to outlined
functions
The latter two only when the function does NOT spill LR. If the
function spills LR, then outliner generated saves/restores around
calls are not considered interesting for unwinding the frame.
Differential Revision: https://reviews.llvm.org/D89483
There were cases where a VCMP and a VPST were merged even if the VCMP
didn't have the same defs of its operands as the VPST. This is fixed by
adding RDA checks for the defs. This however gave rise to cases where
the new VPST created would precede the un-merged VCMP and so would fail
a predicate mask assertion since the VCMP wasn't predicated. This was
solved by converting the VCMP to a VPT instead of inserting the new
VPST.
Differential Revision: https://reviews.llvm.org/D90461
When we fold a VCMP into a VPST instruction any kill flags between the
old VCMP position and the new insertion point need to be removed, in
order to keep the verifier happy.
Differential Revision: https://reviews.llvm.org/D90964
Add support for the Neoverse V1 CPU to the ARM and AArch64 backends.
This is based on patches from Mark Murray and Victor Campos.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D90765
Fold
VT = (and (sign_extend NarrowVT to VT) #bitmask)
into
VT = (zero_extend NarrowVT)
With this combine, the test replaces a sign extended load + an
unsigned extention with a zero extended load to render one of the
operands of the last multiplication.
BEFORE | AFTER
f_i16_i32: | f_i16_i32:
.fnstart | .fnstart
ldrsh r0, [r0] | ldrh r1, [r1]
ldrsh r1, [r1] | ldrsh r0, [r0]
smulbb r0, r1, r0 | smulbb r0, r0, r1
uxth r1, r1 | mul r0, r0, r1
mul r0, r0, r1 | bx lr
bx lr |
Reviewed By: resistor
Differential Revision: https://reviews.llvm.org/D90605
This reverts commit ae38540042668675dd16c642d850115f217ea59f.
As well as some follow-up test fixes.
The original change causes new-pass-manager.ll to fail when polly is enabled.
Invert the select condition when masking in the sign bit of a fptoui operation. Also, rather than lowering the sign mask to select/xor and expecting the select to get cleaned up later, directly lower to shift/xor.
Patch by Layton Kifer!
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D90658
Fix a crash when SCC is defined until end of block and mode change
must be inserted in SCC live region.
Reviewed By: mceier
Differential Revision: https://reviews.llvm.org/D90997
Out of bounds shifts are undefined and these instructions mask
their shift amount before use. So we don't need to see a mask
in order to select the instructions.
Results of convergent operations are implicitly affected by the
enclosing control flows and should not be hoisted out of arbitrary
loops.
Patch by Xiaoqing Wu <xiaoqing_wu@apple.com>
Differential Revision: https://reviews.llvm.org/D90361
Optimize address calculations using LEA/LEASL instructions.
Update comments in VEISelLowering.cpp also. Update an
existing regression test optimized by this modification.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D90878
`Replace ISD::SREM handling with KnownBits::srem to reduce code
duplication` (bf04e34383b06f1b71819de7f34a1a1de2cdb6a4) changed
the result of rem.ll regression test. So, updating it.
Removed "implicit def VCC" from declarations of AMDGPU VOPC instructions since they do not implicitly write to VCC in SDWA mode.
Differential Revision: https://reviews.llvm.org/D89168
The multiply part of FMA is commutable, but TargetSelectionDAG.td
doesn't have it marked as commutable so tablegen won't automatically
create the additional patterns.
So manually add commuted patterns.
The debug location is removed from any outlined instruction. This
causes the MachineVerifier to crash on outlined DBG_VALUE
instructions.
Then, debug instructions are "invisible" to the outliner, that is, two
ranges of instructions from different functions are considered
identical if the only difference is debug instructions. Since a debug
instruction from one function is unlikely to provide sensible debug
information about all functions, sharing an outlined sequence, this
patch just removes debug instructions from the outlined functions.
Differential Revision: https://reviews.llvm.org/D89485
These were previously handled by pattern matching shuffles in the selector, but
adding a new opcode and making it equivalent to the AArch64duplane SDAG node
allows us to select more patterns, like lane indexed FMLAs (patch adding a test
for that will be committed later).
The pattern matching code has been simply moved to postlegalize lowering.
Differential Revision: https://reviews.llvm.org/D90820
D80526 added custom lowering to pick the si lib call on RV64, but this custom handling is only enabled when the F and D extension are both disabled. This prevents the si library call from being used for double when F is enabled but D is not.
This patch changes the behavior so we always enable the Custom hook on RV64 and decide in ReplaceNodeResults if we should emit a libcall based on whether the FP type should be softened or not.
Differential Revision: https://reviews.llvm.org/D90817
This change adds a real glc operand to the return atomic
instead of just string " glc" in the middle of the asm
string.
Improves asm parser diagnostics.
Differential Revision: https://reviews.llvm.org/D90730
There is no FSLI instruction, but we can emulate it using FSRI by swapping operands and subtracting the immediate from the bitwidth.
Differential Revision: https://reviews.llvm.org/D90826
Convert GISelKnownBits.computeKnownBitsImpl shift handling to use the common KnownBits implementations, which makes use of the known leading/trailing bits for shifted values in cases where we don't know the shift amount value, as detailed in https://blog.regehr.org/archives/1709
Differential Revision: https://reviews.llvm.org/D90527
Some targets may add required passes via
TargetMachine::registerPassBuilderCallbacks(). We need to run those even
under -O0. As an example, BPFTargetMachine adds
BPFAbstractMemberAccessPass, a required pass.
This also allows us to clean up BackendUtil.cpp (and out-of-tree Rust
usage of the NPM) by allowing us to share added passes like coroutines
and sanitizers between -O0 and other optimization levels.
Tests are a continuation of those added in
https://reviews.llvm.org/D89083.
In order to prevent TargetMachines from adding unnecessary optimization
passes at -O0, TargetMachine::registerPassBuilderCallbacks() will be
changed to take an OptimizationLevel, but that will be done separately.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D89158
Add more profitable sinking patterns if the target bb register pressure
is not too high.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D88126
With new test file this time.
Original message
This new test covers both with and without the F extension enabled.
This shows that the fptosi/fptoui for double->i32 use a different
libcall depending on whether the F extension is enabled. If it's
not enabled we use the 'si' library call. If it is enabled we use 'di'.
This new test covers both with and without the F extension enabled.
This shows that the fptosi/fptoui for double->i32 use a different
libcall depending on whether the F extension is enabled. If it's
not enabled we use the 'si' library call. If it is enabled we use 'di'.
The current compact unwind scheme does not work when the prologue is not at the
start (the instructions before the prologue cannot be described). (Technically
this is fixable, but it requires multiple compact unwind descriptors for one
function.)
rL255175 chose to not perform shrink-wrapping for no-frame-pointer functions not
marked as nounwind to work around PR25614. This is overly limited, as platforms
not supporting compact unwind (all non-Darwin) does not need the workaround.
This patch restricts the limitation to compact unwind platforms.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D89930
Hook up legalizations for VECREDUCE_SEQ_FMUL. This is following up on the VECREDUCE_SEQ_FADD work from D90247.
Differential Revision: https://reviews.llvm.org/D90644
fsl/fsr take their shift amount in $rs2 or an immediate. The
sources are $rs1 and $rs3.
fshl/fshr ISD opcodes both concatenate operand 0 in the high bits and
operand 1 in the lower bits. fshl returns the high bits after
shifting and fshr returns the low bits. So a shift amount of 0
returns operand 0 for fshl and operand 1 for fshr.
fsl/fsr concatenate their operands in different orders such that
$rs1 will be returned for a shift amount of 0. So $rs1 needs to
come from operand 0 of fshl and operand 1 of fshr.
Differential Revision: https://reviews.llvm.org/D90735
