If instructions were removed in peephole passes after the hazard recognizer was
run it is possible that new hazards could be introduced.
Fixes: SWDEV-253090
Reviewed By: rampitec, arsenm
Differential Revision: https://reviews.llvm.org/D89077
NEON is pretty limited in it's reduction support. As a first step add some
basic rules for the legal types we can select.
Differential Revision: https://reviews.llvm.org/D89070
In order to prevent the ExpandReductions pass from expanding some intrinsics
before they get to codegen, I had to add a -disable-expand-reductions flag
for testing purposes.
Differential Revision: https://reviews.llvm.org/D89028
This would end up killing part of the result super-register, resulting
in a verifier error on a later use of the overlapping registers. We
could add kills of any non-aliasing registers, but we should be moving
away from relying on kill flags.
After investigation by @asbirlea, the issue that caused the
revert appears to be an issue in the original source, rather
than a problem with the compiler.
This patch enables MemorySSA DSE again.
This reverts commit 915310bf14cbac58a81fd60e0fa9dc8d341108e2.
This patch adds -f[no-]split-cold-code CC1 options to clang. This allows
the splitting pass to be toggled on/off. The current method of passing
`-mllvm -hot-cold-split=true` to clang isn't ideal as it may not compose
correctly (say, with `-O0` or `-Oz`).
To implement the -fsplit-cold-code option, an attribute is applied to
functions to indicate that they may be considered for splitting. This
removes some complexity from the old/new PM pipeline builders, and
behaves as expected when LTO is enabled.
Co-authored by: Saleem Abdulrasool <compnerd@compnerd.org>
Differential Revision: https://reviews.llvm.org/D57265
Reviewed By: Aditya Kumar, Vedant Kumar
Reviewers: Teresa Johnson, Aditya Kumar, Fedor Sergeev, Philip Pfaffe, Vedant Kumar
It's probably better to split these into separate G_FADD/G_FMUL + G_VECREDUCE
operations in the translator rather than carrying the scalar around. The
majority of the time it'll get simplified away as the scalars are probably
identity values.
Differential Revision: https://reviews.llvm.org/D89150
Similar to MCSymbol::print in 3d6c8ebb584375d01b1acead4c2056b3f0c501fc
(llvm-svn: 81682, PR4966), these symbols may need to be quoted to be handled by
the linker correctly.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D87099
removeMBBifRedundant normally tries to keep predecessors fallthrough when removing redundant MBB.
It has to change MBBs layout to keep the new successor to immediately follow the predecessor of removed MBB.
It only may be allowed in case the new successor itself has no successors to which it fall through.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D89397
Implement stack frame reordering in the AArch64 backend.
Unlike the X86 implementation, AArch64 does not seem to benefit from
"access density" based frame reordering, mainly because it has a much
smaller variety of addressing modes, and the fact that all instructions
are 4 bytes so each frame object is either in range of an instruction
(and then the access is "free") or not (and that has a code size cost
of 4 bytes).
This change improves Memory Tagging codegen by
* Placing an object that has been chosen as the base tagged pointer of
the function at SP + 0. This saves one instruction to setup the pointer
(IRG does not have an offset immediate), and more because that object
can now be referenced without materializing its tagged address in a
scratch register.
* Placing objects that go out of scope simultaneously together. This
exposes opportunities for instruction merging in tryMergeAdjacentSTG.
Differential Revision: https://reviews.llvm.org/D72366
Summary:
Pin the tagged base pointer to one of the stack slots, and (if
necessary) rewrite tag offsets so that an object that occupies that
slot has both address and tag offsets of 0. This allows ADDG
instructions for that object to be eliminated and their uses replaced
with the tagged base pointer itself.
This optimization must be done in machine instructions and not in the IR
instrumentation pass, because referring to a stack slot through an IRG
pointer would confuse the stack coloring pass.
The optimization makes a (pretty naive) attempt to find the slot that
would benefit the most by counting the uses of stack slots in the
function.
Reviewers: ostannard, pcc
Subscribers: merge_guards_bot, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72365
Prototype the newly proposed load_lane instructions, as specified in
https://github.com/WebAssembly/simd/pull/350. Since these instructions are not
available to origin trial users on Chrome stable, make them opt-in by only
selecting them from intrinsics rather than normal ISel patterns. Since we only
need rough prototypes to measure performance right now, this commit does not
implement all the load and store patterns that would be necessary to make full
use of the offset immediate. However, the full suite of offset tests is included
to make it easy to track improvements in the future.
Since these are the first instructions to have a memarg immediate as well as an
additional immediate, the disassembler needed some additional hacks to be able
to parse them correctly. Making that code more principled is left as future
work.
Differential Revision: https://reviews.llvm.org/D89366
This does unfortunately end up with extra waitcnts getting inserted
that were avoided before. Ideally we would avoid the spills of these
undef components in the first place.
Generate the minimal set of s_mov instructions required when
expanding a SGPR copy operation in copyPhysReg.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D89187
This combine can look through (trunc (ctpop X)). When doing this
it tries to make sure the trunc doesn't lose any information
from the ctpop. It does this by checking that the truncated type
has more bits that Log2_32_Ceil of the ctpop type. The Ceil is
unnecessary and pessimizes non-power of 2 types.
For example, ctpop of i256 requires 9 bits to represent the max
value of 256. But ctpop of i255 only requires 8 bits to represent
the max result of 255. Log2_32_Ceil of 256 and 255 both return 8
while Log2_32 returns 8 for 256 and 7 for 255
The code with popcnt enabled is a regression for this test case,
but it does match what already happens with i256 truncated to i9.
Since power of 2 is more likely, I don't think it should block
this change.
Differential Revision: https://reviews.llvm.org/D89412
VE doesn't have SHL_PARTS/SRA_PARTS/SRL_PARTS instructions, so need
to expand them. Add regression tests too.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D89396
These cause problems for later optimizations, just using an unused vreg like
SelectionDAG generates better code in the end, and obviates the need for some
GISel specific flag optimizations.
Differential Revision: https://reviews.llvm.org/D89419
After using this for a while, we find that it is generally useful to
have it set to .text.split. by default, removing the need for an
additional -mllvm option.
Differential Revision: https://reviews.llvm.org/D88997
Currently we add individual BB to BlockFilterSet if its frequency satisfies
LoopFreq / Freq <= LoopToColdBlockRatio
LoopFreq is edge frequency from outside to loop header.
LoopToColdBlockRatio is a command line parameter.
It doesn't make sense since we always layout whole chain, not individual BBs.
It may also cause a tricky problem. Sometimes it is possible that the LoopFreq
of an inner loop is smaller than LoopFreq of outer loop. So a BB can be in
BlockFilterSet of inner loop, but not in BlockFilterSet of outer loop,
like .cold in the test case. So it is added to the chain of inner loop. When
work on the outer loop, .cold is not added to BlockFilterSet, so the edge to
successor .problem is not counted in UnscheduledPredecessors of .problem chain.
But other blocks in the inner loop are added BlockFilterSet, so the whole inner
loop chain can be layout, and markChainSuccessors is called to decrease
UnscheduledPredecessors of following chains. markChainSuccessors calls
markBlockSuccessors for every BB, even it is not in BlockFilterSet, like .cold,
so .problem chain's UnscheduledPredecessors is decreased, but this edge was not
counted on in fillWorkLists, so .problem chain's UnscheduledPredecessors
becomes 0 when it still has an unscheduled predecessor .pred! And it causes
problems in following various successor BB selection algorithms.
Differential Revision: https://reviews.llvm.org/D89088
NVPTXLowerArgs works as follows.
* Create a regular alloca with alignment identical to arg.
* Copy arg from param space (and ASC'ing it from generic AS first) to
the alloca (it's still in generic AS).
* Replace loads of arg with loads of alloca.
The bug here is that we did not preserve the arg's alignment when
loading from the alloca.
The impact of this bug is that sometimes param loads would be lowered as
a series of u8 loads, because we're incorrectly assuming everything has
alignment 1.
Differential Revision: https://reviews.llvm.org/D89404
This combine can look through (trunc (ctpop X)). When doing this
it tries to make sure the trunc doesn't lose any information
from the ctpop. It does this by checking that the truncated type
has more bits that Log2_32_Ceil of the ctpop type. The Ceil is
unnecessary and pessimizes non-power of 2 types.
For example, ctpop of i256 requires 9 bits to represent the max
value of 256. But ctpop of i255 only requires 8 bits to represent
the max result of 255. Log2_32_Ceil of 256 and 255 both return 8
while Log2_32 returns 8 for 256 and 7 for 255.
Summary:
This patch does the following:
1. Make InitTargetOptionsFromCodeGenFlags() accepts Triple as a
parameter, because some options' default value is triple dependant.
2. DataSections is turned on by default on AIX for llc.
3. Test cases change accordingly because of the default behaviour change.
4. Clang Driver passes in -fdata-sections by default on AIX.
Reviewed By: MaskRay, DiggerLin
Differential Revision: https://reviews.llvm.org/D88737
In order to correctly load an all-ones FP NaN value into a floating point
register with a VGBM, the analyzed 32/64 FP bits must first be shifted left
(into element 0 of the vector register).
SystemZVectorConstantInfo has so far relied on element replication which has
bypassed the need to do this shift, but now it is clear that this must be
done in order to handle NaNs.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D89389
While we haven't encountered an earth-shattering problem with this yet,
by now it is pretty evident that trying to model the ptr->int cast
implicitly leads to having to update every single place that assumed
no such cast could be needed. That is of course the wrong approach.
Let's back this out, and re-attempt with some another approach,
possibly one originally suggested by Eli Friedman in
https://bugs.llvm.org/show_bug.cgi?id=46786#c20
which should hopefully spare us this pain and more.
This reverts commits 1fb610429308a7c29c5065f5cc35dcc3fd69c8b1,
7324616660fc0995fa8c166e3c392361222d5dbc,
aaafe350bb65dfc24c2cdad4839059ac81899fbe,
e92a8e0c743f83552fac37ecf21e625ba3a4b11e.
I've kept&improved the tests though.
When passing SVE types as arguments to function calls we can run
out of hardware SVE registers. This is normally fine, since we
switch to an indirect mode where we pass a pointer to a SVE stack
object in a GPR. However, if we switch over part-way through
processing a SVE tuple then part of it will be in registers and
the other part will be on the stack. This is wrong and we'd like
to avoid any silent ABI compatibility issues in future. For now,
I've added a fatal error when this happens until we can get a
proper fix.
Differential Revision: https://reviews.llvm.org/D89326
https://reviews.llvm.org/D88865
This adds a single combine for GlobalISel to fold:
ptradd (inttoptr C1) C2
Into:
C1 + C2
Additionally, a small test for AArch64 is added.
Patch by pnappa.
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
Update few tests after statepoint format change (D87154).
These tests exercise functionality not affected by the format change,
so they left unchanged.
This patch adds support for assemble disassemble intrinsics
for MMA.
Reviewed By: bsaleil, #powerpc
Differential Revision: https://reviews.llvm.org/D88739
