Separate the LoZ ELF calling convention in tablegen.
This will make it easier to add the z/OS ABI in future patches.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D96867
This allows the option to affect the LTO output. Module::Max helps to
generate debug info for all modules in the same format.
Differential Revision: https://reviews.llvm.org/D96597
Basic block sections enables function sections implicitly, this is not needed
and is inefficient with "=list" option.
We had basic block sections enable function sections implicitly in clang. This
is particularly inefficient with "=list" option as it places functions that do
not have any basic block sections in separate sections. This causes unnecessary
object file overhead for large applications.
This patch disables this implicit behavior. It only creates function sections
for those functions that require basic block sections.
Further, there was an inconistent behavior with llc as llc was not turning on
function sections by default. This patch makes llc and clang consistent and
tests are added to check the new behavior.
This is the first of two patches and this adds functionality in LLVM to
create a new section for the entry block if function sections is not
enabled.
Differential Revision: https://reviews.llvm.org/D93876
This patch enables AsmPrinter support for complex expression with
entry values. It shouldn't AsmPrinter's call whether these are safe or
not but the pass who introduces the DW_OP_LLVM_entry_value. This patch
on its own has no effect on clang.
Differential Revision: https://reviews.llvm.org/D96559
Their names don't convey much information, so they should be excluded.
The behavior matches addr2line.
Differential Revision: https://reviews.llvm.org/D96617
Before d08bd13ac8a560c4645e17e192ca07e1bdcd2895, only `SymbolRef::ST_Function`
symbols were used for .symtab symbolization. That commit added a `"DATA"` mode
to llvm-symbolizer which used `SymbolRef::ST_Data` symbols for symbolization.
Since function and data symbols have different addresses, we don't need to
differentiate the two modes. This patches unifies the two modes to simplify
code.
`"DATA"` is used by `compiler-rt/lib/sanitizer_common/sanitizer_symbolizer_libcdep.cpp`.
`check-hwasan` and `check-tsan` have runtime tests.
Differential Revision: https://reviews.llvm.org/D96322
The ELF spec says:
> STT_FILE: Conventionally, the symbol's name gives the name of the source file associated with the object file. A file symbol has STB_LOCAL binding, its section index is SHN_ABS, and it precedes the other STB_LOCAL symbols for the file, if it is present.
For a local symbol, the preceding STT_FILE symbol is almost always in the same
file[1]. GNU addr2line uses this heuristic to retrieve the filename associated
with a local symbol (e.g. internal linkage functions in C/C++).
GNU addr2line can assign STT_FILE filename to a non-local symbol, too, but the trick
only works if no regular symbol precede STT_FILE. This patch does not implement this corner case
(not useful for most executables which have more than one files).
In case of filename mismatch between .debug_line & .symtab, arbitrarily make .debug_line win.
[1]: LLD does not synthesize STT_FILE symbols
(https://bugs.llvm.org/show_bug.cgi?id=48023 see also
https://sourceware.org/bugzilla/show_bug.cgi?id=26822). An assembly file
without `.file` directives can cause mis-attribution. This is an edge case.
Differential Revision: https://reviews.llvm.org/D95927
Originally landed in ddc2f1e3fb4 and reverted in d32deaab4d because of
a Generic test objecting. That was fixed up in 013613964fd9. Original
landing commit message follows:
[DWARF] Location-less inlined variables should not have DW_TAG_variable
Discussed in this thread:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/148139.html
DwarfDebug::collectEntityInfo accidentally distinguishes between variable
locations that never have a location specified, and variable locations that
have an empty location specified. The latter leads to the creation of an
empty variable referring to the abstract origin.
Fix this by seeking a non-empty location before producing a concrete
entity, to guarantee a DW_AT_location will be produced. Other loops in
collectEntityInfo and endFunctionImpl take care of examining the
retainedNodes collection and ensuring optimised-out variables are created.
Differential Revision: https://reviews.llvm.org/D95617
Was e05c10380ce, reverted in d7d0b17de77, see D95617 for details. I've
added "arm64" to the XFail list (as well as aarch64), will follow up on
the mailing list about whether there's anything else to be done.
This reverts commit e05c10380ce7c18d1a232dcc5baa7c10d8bd2bf6.
See parent commit, there's a bot which isn't captured in the XFail list,
reverting til I work out what it is.
This reverts commit 4fd29e4fd3c5490b658f4b467d94aeed6b3d1ac3.
There's a report in D95617 that this is failing on what (I think?) is an
aarch64 bot, which should be covered by the XFail list... reverting this
follow-up and the base patch until I work out what's wrong here.
In assembly files, omitting `.type foo,@function` is common. Such functions have
type `STT_NOTYPE` and llvm-symbolizer reports `??` for them.
An ifunc symbol usually has an associated resolver symbol which is defined at
the same address. Returning either one is fine for symbolization. The resolver
symbol may not end up in the symbol table if (object file) `.L` is used (linked
image) .symtab is stripped while .dynsym is retained.
This patch allows ELF STT_NOTYPE/STT_GNU_IFUNC symbols for .symtab symbolization.
I have left TODO in the test files for an unimplemented STT_FILE heuristic.
Differential Revision: https://reviews.llvm.org/D95916
Maskray has reported a fault with .debug_gnu_pubnames in the comments on
D94976, caused by this patch, reverting to investigate.
This reverts commit 8998f5843503773c2f51fd475e2c77c687a65ee6.
In the LLVM-IR for this test, the inlined argument "b" in the "a" function
is optimized out on certain architectures, not on others. This hasn't been
reported as a test failure since 93faeecd8fa and ff2073a51 because we would
create a variable that looks like this:
DW_TAG_formal_parameter
DW_AT_abstract_origin
With no further information (and no location). With D95617 however, we
stop emitting such variables.
Prior to landing D95617: make this test stricter by checking that the
variable mentioned above has a location. We have to accept that on certain
architectures this goes missing, so add those to the XFail list.
I've run a few experiments, and right now it looks likely only powerpc64
still drops the variable location.
Previously the code split the string at the first '<', which
incorrectly truncated names like `operator<`.
Differential Revision: https://reviews.llvm.org/D95893
This modified patch avoids redirecting the unit in which a subprogram is
created if type units are enabled -- DIEs were getting children allocated
from different units memory pools. Original commit message:
[DWARF] Create subprogram's DIE in DISubprogram's unit
This is a fix for PR48790. Over in D70350, subprogram DIEs were permitted
to be shared between CUs. However, the creation of a subprogram DIE can be
triggered early, from other CUs. The subprogram definition is then created
in one CU, and when the function is actually emitted children are attached
to the subprogram that expect to be in another CU. This breaks internal CU
references in the children.
Fix this by redirecting the creation of subprogram DIEs in
getOrCreateContextDIE to the CU specified by it's DISubprogram definition.
This ensures that the subprogram DIE is always created in the correct CU.
Differential Revision: https://reviews.llvm.org/D94976
Discussed in this thread:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/148139.html
DwarfDebug::collectEntityInfo accidentally distinguishes between variable
locations that never have a location specified, and variable locations that
have an empty location specified. The latter leads to the creation of an
empty variable referring to the abstract origin.
Fix this by seeking a non-empty location before producing a concrete
entity, to guarantee a DW_AT_location will be produced. Other loops in
collectEntityInfo and endFunctionImpl take care of examining the
retainedNodes collection and ensuring optimised-out variables are created.
Differential Revision: https://reviews.llvm.org/D95617
On z/OS, the following error message is not matched correctly in lit tests.
```
EDC5129I No such file or directory.
```
This patch uses a lit config substitution to check for platform specific error messages.
Reviewed By: muiez, jhenderson
Differential Revision: https://reviews.llvm.org/D95246
This patch adds the ability to evaluate the state machine for CIE and FDE unwind objects and produce a UnwindTable with all UnwindRow objects needed to unwind registers. It will also dump the UnwindTable for each CIE and FDE when dumping DWARF .debug_frame or .eh_frame sections in llvm-dwarfdump or llvm-objdump. This allows users to see what the unwind rows actually look like for a given CIE or FDE instead of just seeing a list of opcodes.
This patch adds new classes: UnwindLocation, RegisterLocations, UnwindRow, and UnwindTable.
UnwindLocation is a class that describes how to unwind a register or Call Frame Address (CFA).
RegisterLocations is a class that tracks registers and their UnwindLocations. It gets populated when parsing the DWARF call frame instruction opcodes for a unwind row. The registers are mapped from their register numbers to the UnwindLocation in a map.
UnwindRow contains the result of evaluating a row of DWARF call frame instructions for the CIE, or a row from a FDE. The CIE can produce a set of initial instructions that each FDE that points to that CIE will use as the seed for the state machine when parsing FDE opcodes. A UnwindRow for a CIE will not have a valid address, whille a UnwindRow for a FDE will have a valid address.
The UnwindTable is a class that contains a sorted (by address) vector of UnwindRow objects and is the result of parsing all opcodes in a CIE, or FDE. Parsing a CIE should produce a UnwindTable with a single row. Parsing a FDE will produce a UnwindTable with one or more UnwindRow objects where all UnwindRow objects have valid addresses. The rows in the UnwindTable will be sorted from lowest Address to highest after parsing the state machine, or an error will be returned if the table isn't sorted. To parse a UnwindTable clients can use the following methods:
static Expected<UnwindTable> UnwindTable::create(const CIE *Cie);
static Expected<UnwindTable> UnwindTable::create(const FDE *Fde);
A valid table will be returned if the DWARF call frame instruction opcodes have no encoding errors. There are a few things that can go wrong during the evaluation of the state machine and these create functions will catch and return them.
Differential Revision: https://reviews.llvm.org/D89845
This reverts commit ef0dcb506300dc9644e8000c6028d14214be9d97.
This change is causing a lot of compiler crashes inside, sorry I don't have a
small repro/stacktrace with symbols to share right now.
Differential Revision: https://reviews.llvm.org/D95622
Experimental, using non-existent DWARF support to use an expr for the
location involving an addr_index (to compute address + offset so
addresses can be reused in more places).
The global variable debug info had to be deferred until the end of the
module (so bss variables would all be emitted first - so their labels
would have the relevant section). Non-bss variables seemed to not have
their label assigned to a section even at the end of the module, so I
didn't know what to do there.
Also, the hashing code is broken - doesn't know how to hash these
expressions (& isn't hashing anything inside subprograms, which seems
problematic), so for test purposes this change just skips the hash
computation. (GCC's actually overly sensitive in its hash function, it
seems - I'm forgetting the specific case right now - anyway, we might
want to just use the frontend-known file hash and give up on optimistic
.dwo/.dwp reuse)
This is a fix for PR48790. Over in D70350, subprogram DIEs were permitted
to be shared between CUs. However, the creation of a subprogram DIE can be
triggered early, from other CUs. The subprogram definition is then created
in one CU, and when the function is actually emitted children are attached
to the subprogram that expect to be in another CU. This breaks internal CU
references in the children.
Fix this by redirecting the creation of subprogram DIEs in
getOrCreateContextDIE to the CU specified by it's DISubprogram definition.
This ensures that the subprogram DIE is always created in the correct CU.
Differential Revision: https://reviews.llvm.org/D94976
This moves SinkIntoLoop from MachineLICM to MachineSink. The motivation for
this work is that hoisting is a canonicalisation transformation, but we do not
really have a good story to sink instructions back if that is better, e.g. to
reduce live-ranges, register pressure and spilling. This has been discussed a
few times on the list, the latest thread is:
https://lists.llvm.org/pipermail/llvm-dev/2020-December/147184.html
There it was pointed out that we have the LoopSink IR pass, but that works on
IR, lacks register pressure informatiom, and is focused on profile guided
optimisations, and then we have MachineLICM and MachineSink that both perform
sinking. MachineLICM is more about hoisting and CSE'ing of hoisted
instructions. It also contained a very incomplete and disabled-by-default
SinkIntoLoop feature, which we now move to MachineSink.
Getting loop-sinking to do something useful is going to be at least a 3-step
approach:
1) This is just moving the code and is almost a NFC, but contains a bug fix.
This uses helper function `isLoopInvariant` that was factored out in D94082 and
added to MachineLoop.
2) A first functional change to make loop-sink a little bit less restrictive,
which it really is at the moment, is the change in D94308. This lets it do
more (alias) analysis using functions in MachineSink, making it a bit more
powerful. Nothing changes much: still off by default. But it shows that
MachineSink is a better home for this, and it starts using its functionality
like `hasStoreBetween`, and in the next step we can use `isProfitableToSinkTo`.
3) This is the going to be he interesting step: decision making when and how
many instructions to sink. This will be driven by the register pressure, and
deciding if reducing live-ranges and loop sinking will help in better
performance.
4) Once we are happy with 3), this should be enabled by default, that should be
the end goal of this exercise.
Differential Revision: https://reviews.llvm.org/D93694
In MipsDelaySlotFiller, when replacing old call-branch with
the compact branch instruction, an assertion is caused by erasing
the old call with unhandled CSInfo.
The problem was reported in PR48695.
This patch fixes it, by moving call site info from the old call
instruction to its replace.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D94685
On z/OS, the following error message is not matched correctly in lit tests. This patch updates the CHECK expression to match successfully.
```
EDC5129I No such file or directory.
```
Reviewed By: muiez
Differential Revision: https://reviews.llvm.org/D94239
New dwarf operator DW_OP_LLVM_implicit_pointer is introduced (present only in LLVM IR)
This operator is required as it is different than DWARF operator
DW_OP_implicit_pointer in representation and specification (number
and types of operands) and later can not be used as multiple level.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D84113
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
This adds a new test checking llvm-symbolizer with an object built with basic block sections.
Build a object with -fbasic-block-sections and reorder the basic blocks to be
non-contiguous. Then check if llvm-symbolizer correctly reports the symbolized
addresses. Included the source to build the object with command lines.
Differential Revision: https://reviews.llvm.org/D91678
This reverts commit 1816de08232673e97ec41287ad3f6494bceaec43.
This breaks on ppc64 and windows although x86-registered-target is
mentioned. I will re-commit after fixing.
Build a object with -fbasic-block-sections and reorder the basic blocks to be
non-contiguous. Then check if llvm-symbolizer correctly reports the symbolized
addresses. Included the source to build the object with command lines.
Differential Revision: https://reviews.llvm.org/D91678
Given the ability provided by DWARFv5 rnglists to reuse addresses in the
address pool, it can be advantageous to object file size to use range
encodings even when the range could be described by a direct low/high
pc.
Add a flag to allow enabling this in DWARFv5 for the purpose of
experimentation/data gathering.
It might be that it makes sense to enable this functionality by default
for DWARFv5 + Split DWARF at least, where the tradeoff/desire to
optimize for .o file size is more explicit and .o bytes are higher
priority than .dwo bytes.
Every basic block section symbol created by -fbasic-block-sections will contain
".__part." to know that this symbol corresponds to a basic block fragment of
the function.
This patch solves two problems:
a) Like D89617, we want function symbols with suffixes to be properly qualified
so that external tools like profile aggregators know exactly what this
symbol corresponds to.
b) The current basic block naming just adds a ".N" to the symbol name where N is
some integer. This collides with how clang creates __cxx_global_var_init.N.
clang creates these symbol names to call constructor functions and basic
block symbol naming should not use the same style.
Fixed all the test cases and added an extra test for __cxx_global_var_init
breakage.
Differential Revision: https://reviews.llvm.org/D93082
Currently using DW_OP_implicit_value in fragments produces invalid DWARF
expressions. (Such a case can occur in complex floats, for example.)
This problem manifests itself as a missing DW_OP_piece operation after
the last fragment. This happens because the function for printing
constant float value skips printing the accompanying DWARF expression,
as that would also print DW_OP_stack_value (which is not desirable in
this case). However, this also results in DW_OP_piece being skipped.
The reason that DW_OP_piece is missing only for the last piece is that
the act of printing the next fragment corrects this. However, it does
that for the wrong reason -- the code emitting this DW_OP_piece thinks
that the previous fragment was missing, and so it thinks that it needs
to skip over it in order to be able to print itself.
In a simple scenario this works out, but it's likely that in a more
complex setup (where some pieces are in fact missing), this logic would
go badly wrong. In a simple setup gdb also seems to not mind the fact
that the DW_OP_piece is missing, but it would also likely not handle
more complex use cases.
For this reason, this patch disables the usage of DW_OP_implicit_value
in the frament scenario (we will use DW_OP_const*** instead), until we
figure out the right way to deal with this. This guarantees that we
produce valid expressions, and gdb can handle both kinds of inputs
anyway.
Differential Revision: https://reviews.llvm.org/D92013
The main change is to add a 'IsDecl' field to DIModule so
that when IsDecl is set to true, the debug info entry generated
for the module would be marked as a declaration. That way, the debugger
would look up the definition of the module in the gloabl scope.
Please see the comments in llvm/test/DebugInfo/X86/dimodule.ll
for what the debug info entries would look like.
Differential Revision: https://reviews.llvm.org/D93462
Use SCEV to salvage additional @llvm.dbg.value that have turned into
referencing undef after transformation (and traditional
salvageDebugInfo). Before rewrite (but after introduction of new
induction variables) use SCEV to compute an equivalent set of values for
each @llvm.dbg.value in the loop body (among the loop header PHI-nodes).
After rewrite (and dead PHI elimination) update those @llvm.dbg.value
now referencing undef by picking a remaining value from its equivalence
set. Allow match with offset by inserting compensation code in the
DIExpression.
Fixes : PR38815
Differential Revision: https://reviews.llvm.org/D87494
