Rationale:
Narrower types for overhead storage yield a smaller memory footprint for
sparse tensors and thus needs to be supported. Also, more value types
need to be supported to deal with all kinds of kernels. Since the
"one-size-fits-all" sparse storage scheme implementation is used
instead of actual codegen, the library needs to be able to support
all combinations of desired types. With some crafty templating and
overloading, the actual code for this is kept reasonably sized though.
Reviewed By: bixia
Differential Revision: https://reviews.llvm.org/D96819
Resolving the dim of outputs of a tensor_reshape op in terms of its
input shape allows the op to be eliminated when its used only in its
dims. The init_tensor -> tensor_reshape canonicalization can be
simplified to use the dims of the output of the tensor_reshape which
gets canonicalized away later making the tensor_reshape dead.
Differential Revision: https://reviews.llvm.org/D96635
When the destination of the subview has a lower rank than its source we need to
fix the result type of the new subview op.
Differential Revision: https://reviews.llvm.org/D96804
Verification of the LLVM IR produced when translating various MLIR dialects was
only active when calling the translation programmatically. This has led to
several cases of invalid LLVM IR being generated that could not be caught with
textual mlir-translate tests. Add verifiers for these cases and fix the tests
in preparation for enforcing the validation of LLVM IR.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96774
Some of the lowering of vector.contract didn't support integer case. Since
reduction of integer cannot accumulate we always break up the reduction op, it
should be merged by a separate canonicalization if possible.
Differential Revision: https://reviews.llvm.org/D96461
This revision adds support for hoisting "subtensor + vector.transfer_read" / "subtensor_insert + vector.transfer_write pairs" across scf.for.
The unit of hoisting becomes a HoistableRead / HoistableWrite struct which contains a pair of "vector.transfer_read + optional subtensor" / "vector.transfer_write + optional subtensor_insert".
scf::ForOp canonicalization patterns are applied greedily on the successful application of the transformation to cleanup the IR more eagerly and potentially expose more transformation opportunities.
Differential revision: https://reviews.llvm.org/D96731
This corresponds with the previous work to make shape.broadcast nary.
Additionally, simplify the ConvertShapeConstraints pass. It now doesn't
lower an implicit shape.is_broadcastable. This is still the same in
combination with shape-to-standard when the 2 passes are used in either
order.
Differential Revision: https://reviews.llvm.org/D96401
Currently, vector.contract joins the intermediate result and the accumulator
argument (of ranks K) using summation. We desire more joining operations ---
such as max --- to help vector.contract express reductions. This change extends
Vector_ContractionOp to take an optional attribute (called "kind", of enum type
CombiningKind) specifying the joining operation to be add/mul/min/max for int/fp
, and and/or/xor for int only. By default this attribute has value "add".
To implement this we also need to extend vector.outerproduct, since
vector.contract gets transformed to vector.outerproduct (and that to
vector.fma). The extension for vector.outerproduct is also an optional kind
attribute that uses the same enum type and possible values. The default is
"add". In case of max/min we transform vector.outerproduct to a combination of
compare and select.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D93280
Align the vector gather/scatter/expand/compress API with
the vector load/store/maskedload/maskedstore API.
Reviewed By: aartbik
Differential Revision: https://reviews.llvm.org/D96396
This patch adds the 'vector.load' and 'vector.store' ops to the Vector
dialect [1]. These operations model *contiguous* vector loads and stores
from/to memory. Their semantics are similar to the 'affine.vector_load' and
'affine.vector_store' counterparts but without the affine constraints. The
most relevant feature is that these new vector operations may perform a vector
load/store on memrefs with a non-vector element type, unlike 'std.load' and
'std.store' ops. This opens the representation to model more generic vector
load/store scenarios: unaligned vector loads/stores, perform scalar and vector
memory access on the same memref, decouple memory allocation constraints from
memory accesses, etc [1]. These operations will also facilitate the progressive
lowering of both Affine vector loads/stores and Vector transfer reads/writes
for those that read/write contiguous slices from/to memory.
In particular, this patch adds the 'vector.load' and 'vector.store' ops to the
Vector dialect, implements their lowering to the LLVM dialect, and changes the
lowering of 'affine.vector_load' and 'affine.vector_store' ops to the new vector
ops. The lowering of Vector transfer reads/writes will be implemented in the
future, probably as an independent pass. The API of 'vector.maskedload' and
'vector.maskedstore' has also been changed slightly to align it with the
transfer read/write ops and the vector new ops. This will improve reusability
among all these operations. For example, the lowering of 'vector.load',
'vector.store', 'vector.maskedload' and 'vector.maskedstore' to the LLVM dialect
is implemented with a single template conversion pattern.
[1] https://llvm.discourse.group/t/memref-type-and-data-layout/
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96185
The dimension order of a filter in tensorflow is
[filter_height, filter_width, in_channels, out_channels], which is different
from current definition. The current definition follows TOSA spec. Add TF
version conv ops to .tc, so we do not have to insert a transpose op around a
conv op.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D96038
This revision connects the generated sparse code with an actual
sparse storage scheme, which can be initialized from a test file.
Lacking a first-class citizen SparseTensor type (with buffer),
the storage is hidden behind an opaque pointer with some "glue"
to bring the pointer back to tensor land. Rather than generating
sparse setup code for each different annotated tensor (viz. the
"pack" methods in TACO), a single "one-size-fits-all" implementation
has been added to the runtime support library. Many details and
abstractions need to be refined in the future, but this revision
allows full end-to-end integration testing and performance
benchmarking (with on one end, an annotated Lingalg
op and, on the other end, a JIT/AOT executable).
Reviewed By: nicolasvasilache, bixia
Differential Revision: https://reviews.llvm.org/D95847
This revision fixes the indexing logic into the packed tensor that result from hoisting padding. Previously, the index was incorrectly set to the loop induction variable when in fact we need to compute the iteration count (i.e. `(iv - lb).ceilDiv(step)`).
Differential Revision: https://reviews.llvm.org/D96417
This commit defines linalg.depthwise_conv_2d_nhwc for depthwise
2-D convolution with NHWC input/output data format.
This op right now only support channel multiplier == 1, which is
the most common case.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D94966
This revision fixes the fact that the padding transformation did not have enough information to set the proper type for the padding value.
Additionally, the verifier for Yield in the presence of PadTensorOp is fixed to properly report incorrect number of results or operands. Previously, the error would be silently ignored which made the core issue difficult to debug.
Differential Revision: https://reviews.llvm.org/D96264
After the LLVM dialect types were ported to use built-in types, the parser kept
supporting the old syntax for LLVM dialect types to produce built-in types for
compatibility. Drop this support.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D96275
These patterns move vector.bitcast ops to be before
insert ops or after extract ops where suitable.
With them, bitcast will happen on smaller vectors
and there are more chances to share extract/insert
ops.
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D96040
This patch adds patterns to use vector.shape_cast to cast
away leading 1-dimensions from a few vector operations.
It allows exposing more canonical forms of vector.transfer_read,
vector.transfer_write, vector_extract_strided_slice, and
vector.insert_strided_slice. With this, we can have more
opportunity to cancelling extract/insert ops or forwarding
write/read ops.
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D95873
Historically, Linalg To LLVM conversion subsumed numerous other conversions,
including (affine) loop lowerings to CFG and conversions from the Standard and
Vector dialects to the LLVM dialect. This was due to the insufficient support
for partial conversions in the infrastructure that essentially required
conversions that involve type change (in this case, !linalg.range to
!llvm.struct) to be performed in a single conversion sweep. This is no longer
the case so remove the subsumed conversions and run them as separate passes
when necessary.
Depends On D95317
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96008
Historically, the Vector to LLVM dialect conversion subsumed the Standard to
LLVM dialect conversion patterns. This was necessary because the conversion
infrastructure did not have sufficient support for reconciling type
conversions. This support is now available. Only keep the patterns related to
the Vector dialect in the Vector to LLVM conversion and require type casts
operations to be inserted if necessary. These casts will be removed by
following conversions if possible. Update integration tests to also run the
Standard to LLVM conversion.
There is a significant amount of test churn, which is due to (a) unnecessarily
strict tests in VectorToLLVM and (b) many patterns actually targeting Standard
dialect ops instead of LLVM dialect ops leading to tests actually exercising a
Vector->Standard->LLVM conversion. This churn is a good illustration of the
reason to make the conversion partial: now the tests only check the code in the
Vector to LLVM conversion and will not be randomly broken by changes in
Standard to LLVM conversion.
Arguably, it may be possible to extract Vector to Standard patterns into a
separate pass, but given the ongoing splitting of the Standard dialect, such
pass will be short-lived and will require further refactoring.
Depends On D95626
Reviewed By: nicolasvasilache, aartbik
Differential Revision: https://reviews.llvm.org/D95685
This revision defines a Linalg contraction in general terms:
1. Has 2 input and 1 output shapes.
2. Has at least one reduction dimension.
3. Has only projected permutation indexing maps.
4. its body computes `u5(u1(c) + u2(u3(a) * u4(b)))` on some field
(AddOpType, MulOpType), where u1, u2, u3, u4 and u5 represent scalar unary
operations that may change the type (e.g. for mixed-precision).
As a consequence, when vectorization of such an op occurs, the only special
behavior is that the (unique) MulOpType is vectorized into a
`vector.contract`. All other ops are handled in a generic fashion.
In the future, we may wish to allow more input arguments and elementwise and
constant operations that do not involve the reduction dimension(s).
A test is added to demonstrate the proper vectorization of matmul_i8_i8_i32.
Differential revision: https://reviews.llvm.org/D95939
We should be check whether lb + step >= ub to determine
whether this is a single iteration. Previously we were
checking lb + lb >= ub.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D95440
We should be check whether lb + step >= ub to determine
whether this is a single iteration. Previously we were
checking lb + lb >= ub.
Differential Revision: https://reviews.llvm.org/D95440
Fix a bug that was introduced where calling the codegen strategy with actual concrete C++ Op types did not trigger the expected behavior.
Also introduce a test for the behavior that was missing.
Differential Revision: https://reviews.llvm.org/D95863
This revision unifies Linalg vectorization and paves the way for vectorization of Linalg ops with mixed-precision operations.
The new algorithm traverses the ops in the linalg block in order and avoids recursion.
It uses a BlockAndValueMapping to keep track of vectorized operations.
The revision makes the following modifications but is otherwise NFC:
1. vector.transfer_read are created eagerly and may appear in a different order than the original order.
2. a more progressive vectorization to vector.contract results in only the multiply operation being converted to `vector.contract %a, %b, %zero`, where `%zero` is a
constant of the proper type. Later vector canonicalizations are assumed to rewrite vector.contract %a, %b, %zero + add to a proper accumulate form.
Differential revision: https://reviews.llvm.org/D95797
Add printer and parser hooks for a custom directive that allows
parsing and printing of idioms that can represent a list of values
each of which is either an integer or an SSA value. For example in
`subview %source[%offset_0, 1] [4, %size_1] [%stride_0, 3]`
each of the list (which represents offset, size and strides) is a mix
of either statically know integer values or dynamically computed SSA
values. Since this is used in many places adding a custom directive to
parse/print this idiom allows using assembly format on operations
which use this idiom.
Differential Revision: https://reviews.llvm.org/D95773
This is the last revision to migrate using SimplePadOp to PadTensorOp, and the
SimplePadOp is removed in the patch. Update a bit in SliceAnalysis because the
PadTensorOp takes a region different from SimplePadOp. This is not covered by
LinalgOp because it is not a structured op.
Also, remove a duplicated comment from cpp file, which is already described in a
header file. And update the pseudo-mlir in the comment.
This is as same as D95615 but fixing one dep in CMakeLists.txt
Different from D95671, the fix was applied to run target.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D95785
