https://github.com/llvm/llvm-project/pull/152709 exposed the original IR
argument type to the CC lowering logic. However, in SDAG, this used the
raw type, prior to aggregate splitting. This PR changes it to use the
non-aggregate type instead. (This matches what happened in the
GlobalISel case already.)
I've also added some more detailed documentation on the
InputArg/OutputArg fields, to explain how they differ. In most cases
ArgVT is going to be the EVT of OrigTy, so they encode very similar
information (OrigTy just preserves some additional information lost in
EVTs, like pointer types). One case where they do differ is in
post-legalization lowering of libcalls, where ArgVT is going to be a
legalized type, while OrigTy is going to be the original non-legalized
type.
It is common to have ABI requirements for illegal types: For example,
two i64 argument parts that originally came from an fp128 argument may
have a different call ABI than ones that came from a i128 argument.
The current calling convention lowering does not provide access to this
information, so backends come up with various hacks to support it (like
additional pre-analysis cached in CCState, or bypassing the default
logic entirely).
This PR adds the original IR type to InputArg/OutputArg and passes it
down to CCAssignFn. It is not actually used anywhere yet, this just does
the mechanical changes to thread through the new argument.
This introduces a new `ptrtoaddr` instruction which is similar to
`ptrtoint` but has two differences:
1) Unlike `ptrtoint`, `ptrtoaddr` does not capture provenance
2) `ptrtoaddr` only extracts (and then extends/truncates) the low
index-width bits of the pointer
For most architectures, difference 2) does not matter since index (address)
width and pointer representation width are the same, but this does make a
difference for architectures that have pointers that aren't just plain
integer addresses such as AMDGPU fat pointers or CHERI capabilities.
This commit introduces textual and bitcode IR support as well as basic code
generation, but optimization passes do not handle the new instruction yet
so it may result in worse code than using ptrtoint. Follow-up changes will
update capture tracking, etc. for the new instruction.
RFC: https://discourse.llvm.org/t/clarifiying-the-semantics-of-ptrtoint/83987/54
Reviewed By: nikic
Pull Request: https://github.com/llvm/llvm-project/pull/139357
The information whether a specific argument is vararg or fixed is
currently stored separately from all the other argument information in
ArgFlags. This means that it is not accessible from CCAssign, and
backends have developed all kinds of workarounds for how they can access
it after all.
Move this information to ArgFlags to make it directly available in all
relevant places.
I've opted to invert this and store it as IsVarArg, as I think that both
makes the meaning more obvious and provides for a better default (which
is IsVarArg=false).
Compare sinking is selectable based on the result of
hasMultipleConditionRegisters. This function is too coarse grained by
not taking into account the differences between scalar and vector
compares. This PR extends the interface to take an EVT to allow finer
control.
The new interface is used by AArch64 to disable sinking of scalable
vector compares, but with isProfitableToSinkOperands updated to maintain
the cases that are specifically tested.
Add a new combine to replace
```
(store ch (vselect cond truevec (load ch ptr offset)) ptr offset)
```
to
```
(mstore ch truevec ptr offset cond)
```
This saves a blend operation on targets that support conditional stores.
Cygwin and MinGW share the auto import behavior that could result in
__stack_check_guard being non-dso-local. Allow windres to assume a
Cygwin target as well as a MinGW one, so defines like _WIN32 would not
be present on Cygwin.
These float operations were expanded for scalar f32/f64/f128, but not
for f16 and more problematically, not for vectors. A small subset of
them was separately set to expand for vectors.
Change these to always expand by default, and adjust targets to mark
these as legal where necessary instead.
This is a much safer default, and avoids unnecessary legalization
failures because a target failed to manually mark them as expand.
Fixes https://github.com/llvm/llvm-project/issues/110753.
Fixes https://github.com/llvm/llvm-project/issues/121390.
Previously we had a table of entries for every Libcall for
the comparison to use against an integer 0 if it was a soft
float compare function. This was only relevant to a handful of
opcodes, so it was wasteful. Now that we can distinguish the
abstract libcall for the compare with the concrete implementation,
we can just directly hardcode the comparison against the libcall
impl without this configuration system.
This PR takes the work previously done by @pawan-nirpal-031 on X86 in
#106370, and makes it available in common code. This should enable all
targets to use `__builtin_canonicalize` for all `f(16|32|64|128)` data
types.
Canonicalization is implemented here as multiplication by `1.0`, as
suggested in [the
docs](https://llvm.org/docs/LangRef.html#llvm-canonicalize-intrinsic).
We need the full set of ABI options to accurately compute
the full set of libcalls. This partially resolves missing
information required to compute the set of ARM calls.
This fixes an inconsistency in i64 vector handling between RV32 and
RV64. Even if i64 isn't legal as a scalar, we should still be able
to split a large i64 vector to get down to a legal vector type. We only
need to give up if we need to split a vscale x 1 vector.
After pointer element types were removed this function can only return
a GlobalVariable, so reflect that in the type and comments and clean
up callers.
Reviewers: nikic
Reviewed By: nikic
Pull Request: https://github.com/llvm/llvm-project/pull/141323
Add lowering in tablegen for PARTIAL_REDUCE_U/SMLA ISD nodes. Only
happens when the combine has been performed on the ISD node. Also adds
in check to only do the DAG combine when the node can then eventually be
lowered, so changes neon tests too.
---------
Co-authored-by: James Chesterman <james.chesterman@arm.com>
I noticed these destructors taking time with -ftime-trace and moved some
of them for minor build efficiency improvements.
The main impact of moving destructors out of line is that it avoids
requiring container fields containing other types from being complete,
i.e. one can have uptr<T> or vector<T> as a field with an incomplete
type T, and that means we can reduce transitive includes, as with
LegalizerInfo.h.
Move expensive getDebugOperandsForReg template out-of-line. The
std::function instantiation shows up in time trace even if you don't use
the function.
TargetLoweringBase::getIRStackGuard refers to a platform-specific guard
variable. Before this change, TargetLoweringBase::getSDagStackGuard only
referred to a different variable.
This means that SelectionDAGBuilder's getLoadStackGuard does not get
memory operands. However, AArch64InstrInfo::expandPostRAPseudo assumes
that the passed MachineInstr has nonzero memoperands, causing a
segfault.
We have two possible options here: either disabling the LOAD_STACK_GUARD
node entirely in AArch64TargetLowering::useLoadStackGuardNode or just
making the platform-specific values match across TargetLoweringBase.
Here, we try the latter.
Add signed and unsigned PARTIAL_REDUCE_MLA ISD nodes. Add command line
argument (aarch64-enable-partial-reduce-nodes) that indicates whether the
intrinsic experimental_vector_partial_ reduce_add will be transformed
into the new ISD node. Lowering with the new ISD nodes will, for now,
always be done as an expand.
This adds the `llvm.sincospi` intrinsic, legalization, and lowering
(mostly reusing the lowering for sincos and frexp).
The `llvm.sincospi` intrinsic takes a floating-point value and returns
both the sine and cosine of the value multiplied by pi. It computes the
result more accurately than the naive approach of doing the
multiplication ahead of time, especially for large input values.
```
declare { float, float } @llvm.sincospi.f32(float %Val)
declare { double, double } @llvm.sincospi.f64(double %Val)
declare { x86_fp80, x86_fp80 } @llvm.sincospi.f80(x86_fp80 %Val)
declare { fp128, fp128 } @llvm.sincospi.f128(fp128 %Val)
declare { ppc_fp128, ppc_fp128 } @llvm.sincospi.ppcf128(ppc_fp128 %Val)
declare { <4 x float>, <4 x float> } @llvm.sincospi.v4f32(<4 x float> %Val)
```
Currently, the default lowering of this intrinsic relies on the
`sincospi[f|l]` functions being available in the target's runtime (e.g.
libc).
This adds the `llvm.modf` intrinsic, legalization, and lowering (mostly
reusing the lowering for sincos and frexp).
The `llvm.modf` intrinsic takes a floating-point value and returns both
the integral and fractional parts (as a struct).
```
declare { float, float } @llvm.modf.f32(float %Val)
declare { double, double } @llvm.modf.f64(double %Val)
declare { x86_fp80, x86_fp80 } @llvm.modf.f80(x86_fp80 %Val)
declare { fp128, fp128 } @llvm.modf.f128(fp128 %Val)
declare { ppc_fp128, ppc_fp128 } @llvm.modf.ppcf128(ppc_fp128 %Val)
declare { <4 x float>, <4 x float> } @llvm.modf.v4f32(<4 x float> %Val)
```
This corresponds to the libm `modf` function but returns multiple values
in a struct (rather than take output pointers), which makes it easier to
vectorize.
Based on feedback from the clastb codegen PR, I'm refactoring basic codegen for the vector.extract.last.active intrinsic to lower to an ISD node in SelectionDAGBuilder then expand in LegalizeVectorOps, instead of doing everything in the builder.
The new ISD node (vector_find_last_active) only covers finding the index of the last active element of the mask, and extracting the element + handling passthru is left to existing ISD nodes.
This adds the `llvm.sincos` intrinsic, legalization, and lowering.
The `llvm.sincos` intrinsic takes a floating-point value and returns
both the sine and cosine (as a struct).
```
declare { float, float } @llvm.sincos.f32(float %Val)
declare { double, double } @llvm.sincos.f64(double %Val)
declare { x86_fp80, x86_fp80 } @llvm.sincos.f80(x86_fp80 %Val)
declare { fp128, fp128 } @llvm.sincos.f128(fp128 %Val)
declare { ppc_fp128, ppc_fp128 } @llvm.sincos.ppcf128(ppc_fp128 %Val)
declare { <4 x float>, <4 x float> } @llvm.sincos.v4f32(<4 x float> %Val)
```
The lowering is built on top of the existing FSINCOS ISD node, with
additional type legalization to allow for f16, f128, and vector values.
This change is part of this proposal:
https://discourse.llvm.org/t/rfc-all-the-math-intrinsics/78294
Based on example PR #96222 and fix PR #101268, with some differences due
to 2-arg intrinsic and intermediate refactor (RuntimeLibCalls.cpp).
- Add llvm.experimental.constrained.atan2 - Intrinsics.td,
ConstrainedOps.def, LangRef.rst
- Add to ISDOpcodes.h and TargetSelectionDAG.td, connect to intrinsic in
BasicTTIImpl.h, and LibFunc_ in SelectionDAGBuilder.cpp
- Update LegalizeDAG.cpp, LegalizeFloatTypes.cpp, LegalizeVectorOps.cpp,
and LegalizeVectorTypes.cpp
- Update isKnownNeverNaN in SelectionDAG.cpp
- Update SelectionDAGDumper.cpp
- Update libcalls - RuntimeLibcalls.def, RuntimeLibcalls.cpp
- TargetLoweringBase.cpp - Expand for vectors, promote f16
- X86ISelLowering.cpp - Expand f80, promote f32 to f64 for MSVC
Part 4 for Implement the atan2 HLSL Function #70096.
When lowering `FSINCOS` to a library call (that takes output pointers)
we can avoid creating new stack allocations if the results of the
`FSINCOS` are being stored. Instead, we can take the destination
pointers from the stores and pass those to the library call.
---
Note: As a NFC this also adds (and uses) `RTLIB::getFSINCOS()`.
This fixes#108936, but the calling convention doesn't match with GCC. I
doubt we have such a lib function for now, so leave the calling
convention as is.
C23 introduced new functions fminimum_num and fmaximum_num, and they
follow the minimumNumber and maximumNumber of IEEE754-2019. Let's
introduce new intrinsics to support them.
This patch introduces support only support for scalar values. The
support of
vector (vp, vp.reduce, vector.reduce),
experimental.constrained
will be added in future patches.
With this patch, MIPSr6 and LoongArch can work out of box with
fcanonical and fmax/fmin.
Aarch64/PowerPC64 can use the same login as MIPSr6 and LoongArch, while
they have no fcanonical support yet.
I will add it in future patches.
The FMIN/FMAX of RISC-V instructions follows the
minimumNumber/maximumNumber of IEEE754-2019. We can just add it in
future patch.
Background
https://discourse.llvm.org/t/rfc-fix-llvm-min-f-and-llvm-max-f-intrinsics/79735
Currently we have fminnum/fmaxnum, which have different behavior on
different platform for NUM vs sNaN:
1) Fallback to fmin(3)/fmax(3): return qNaN.
2) ARM64/ARM32+Neon: same as libc.
3) MIPSr6/LoongArch/RISC-V: return NUM.
And the fix of fminnum/fmaxnum to follow minNUM/maxNUM of IEEE754-2008
will submit as separated patches.
A truncate is considered saturated if no additional conversion is required between the target and return values. If the target is saturated when attempting to truncate from a vector, there is an opportunity to optimize it.
Previously, each architecture had its own attempt at optimization, leading to redundant code. This patch implements common logic by introducing three new ISDs:
`ISD::TRUNCATE_SSAT_S`: When the operand is a signed value and the range of values matches the range of signed values of the destination type.
`ISD::TRUNCATE_SSAT_U`: When the operand is a signed value and the range of values matches the range of unsigned values of the destination type.
`ISD::TRUNCATE_USAT_U`: When the operand is an unsigned value and the range of values matches the range of unsigned values of the destination type.
These ISDs indicate a saturated truncate.
Fixes https://github.com/llvm/llvm-project/issues/85903
This patch enables the target-independent lowering of llvm.lround via
GlobalISel. For SelectionDAG, the instrinsic is custom lowered for
AMDGPU. In order to support vector floating point input for llvm.lround,
this patch extends the target independent APIs and provide support for
scalarizing. pr98950 is needed to let verifier allow vector floating
point types
This reverts commit 740161a9b98c9920dedf1852b5f1c94d0a683af5.
I moved the `ISD` dependencies into the CodeGen portion of the handling,
it's a little awkward but it's the easiest solution I can think of for
now.
