This patch adds a ProgramPointTag to the EpsilonPoint created
before we replay a call without inlining.
Differential Revision: https://reviews.llvm.org/D132246
This completes the implementation of P1091R3 and P1381R1.
This patch allow the capture of structured bindings
both for C++20+ and C++17, with extension/compat warning.
In addition, capturing an anonymous union member,
a bitfield, or a structured binding thereof now has a
better diagnostic.
We only support structured bindings - as opposed to other kinds
of structured statements/blocks. We still emit an error for those.
In addition, support for structured bindings capture is entirely disabled in
OpenMP mode as this needs more investigation - a specific diagnostic indicate the feature is not yet supported there.
Note that the rest of P1091R3 (static/thread_local structured bindings) was already implemented.
at the request of @shafik, i can confirm the correct behavior of lldb wit this change.
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/52720
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D122768
This completes the implementation of P1091R3 and P1381R1.
This patch allow the capture of structured bindings
both for C++20+ and C++17, with extension/compat warning.
In addition, capturing an anonymous union member,
a bitfield, or a structured binding thereof now has a
better diagnostic.
We only support structured bindings - as opposed to other kinds
of structured statements/blocks. We still emit an error for those.
In addition, support for structured bindings capture is entirely disabled in
OpenMP mode as this needs more investigation - a specific diagnostic indicate the feature is not yet supported there.
Note that the rest of P1091R3 (static/thread_local structured bindings) was already implemented.
at the request of @shafik, i can confirm the correct behavior of lldb wit this change.
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/52720
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D122768
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z |
parallel --xargs -0 cat | aspell list --mode=none --ignore-case |
grep -E '^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n |
grep -vE '.{25}' | aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential Revision: https://reviews.llvm.org/D130827
This patch introduces a new `ConstructionContext` for
lambda capture. This `ConstructionContext` allows the
analyzer to construct the captured object directly into
it's final region, and makes it possible to capture
non-POD arrays.
Differential Revision: https://reviews.llvm.org/D129967
This patch introduces the evaluation of ArrayInitLoopExpr
in case of structured bindings and implicit copy/move
constructor. The idea is to call the copy constructor for
every element in the array. The parameter of the copy
constructor is also manually selected, as it is not a part
of the CFG.
Differential Revision: https://reviews.llvm.org/D129496
Introducing the support for evaluating the constructor
of every element in an array. The idea is to record the
index of the current array member being constructed and
create a loop during the analysis. We looping over the
same CXXConstructExpr as many times as many elements
the array has.
Differential Revision: https://reviews.llvm.org/D127973
This patch gives basic parsing and semantic support for
"parallel masked taskloop simd" construct introduced in
OpenMP 5.1 (section 2.16.10)
Differential Revision: https://reviews.llvm.org/D128946
This patch gives basic parsing and semantic support for
"parallel masked taskloop" construct introduced in
OpenMP 5.1 (section 2.16.9)
Differential Revision: https://reviews.llvm.org/D128834
The case when the bound variable is reference type in a
BindingDecl wasn't handled, which lead to false positives.
Differential Revision: https://reviews.llvm.org/D128716
This patch gives basic parsing and semantic support for
"masked taskloop simd" construct introduced in OpenMP 5.1 (section 2.16.8)
Differential Revision: https://reviews.llvm.org/D128693
This patch gives basic parsing and semantic support for "masked taskloop"
construct introduced in OpenMP 5.1 (section 2.16.7)
Differential Revision: https://reviews.llvm.org/D128478
Introducing structured binding to data members and more.
To handle binding to arrays, ArrayInitLoopExpr is also
evaluated, which enables the analyzer to store information
in two more cases. These are:
- when a lambda-expression captures an array by value
- in the implicit copy/move constructor for a class
with an array member
Differential Revision: https://reviews.llvm.org/D126613
Thanks @kazu for helping me clean these parts in D127799.
I'm leaving the dump methods, along with the unused visitor handlers and
the forwarding methods.
The dead parts actually helped to uncover two bugs, to which I'm going
to post separate patches.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D127836
I've faced crashes in the past multiple times when some
`check::EndAnalysis` callback caused some crash.
It's really anoying that it doesn't tell which function triggered this
callback.
This patch adds the well-known trace for that situation as well.
Example:
1. <eof> parser at end of file
2. While analyzing stack:
#0 Calling test11
Note that this does not have tests.
I've considered `unittests` for this purpose, by using the
`ASSERT_DEATH()` similarly how we check double eval called functions in
`ConflictingEvalCallsTest.cpp`, however, that the testsuite won't invoke
the custom handlers. Only the message of the `llvm_unreachable()` will
be printed. Consequently, it's not applicable for us testing this
feature.
I've also considered using an end-to-end LIT test for this.
For that, we would need to somehow overload the `clang_analyzer_crash()`
`ExprInspection` handler, to get triggered by other events than the
`EvalCall`. I'm not saying that we could not come up with a generic way
of causing crash in a specific checker callback, but I'm not sure if
that would worth the effort.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D127389
This new CTU implementation is the natural extension of the normal single TU
analysis. The approach consists of two analysis phases. During the first phase,
we do a normal single TU analysis. During this phase, if we find a foreign
function (that could be inlined from another TU) then we don’t inline that
immediately, we rather mark that to be analysed later.
When the first phase is finished then we start the second phase, the CTU phase.
In this phase, we continue the analysis from that point (exploded node)
which had been enqueued during the first phase. We gradually extend the
exploded graph of the single TU analysis with the new node that was
created by the inlining of the foreign function.
We count the number of analysis steps of the first phase and we limit the
second (ctu) phase with this number.
This new implementation makes it convenient for the users to run the
single-TU and the CTU analysis in one go, they don't need to run the two
analysis separately. Thus, we name this new implementation as "onego" CTU.
Discussion:
https://discourse.llvm.org/t/rfc-much-faster-cross-translation-unit-ctu-analysis-implementation/61728
Differential Revision: https://reviews.llvm.org/D123773
Historically, exploded graph dumps were disabled in non-debug builds.
It was done so probably because a regular user should not dump the
internal representation of the analyzer anyway and the dump methods
might introduce unnecessary binary size overhead.
It turns out some of the users actually want to dump this.
Note that e.g. `LiveExpressionsDumper`, `LiveVariablesDumper`,
`ControlDependencyTreeDumper` etc. worked previously, and they are
unaffected by this change.
However, `CFGViewer` and `CFGDumper` still won't work for a similar
reason. AFAIK only these two won't work after this change.
Addresses #53873
---
**baseline**
| binary | size | size after strip |
| clang | 103M | 83M |
| clang-tidy | 67M | 54M |
**after this change**
| binary | size | size after strip |
| clang | 103M | 84M |
| clang-tidy | 67M | 54M |
CMake configuration:
```
cmake -S llvm -GNinja -DBUILD_SHARED_LIBS=OFF -DCMAKE_BUILD_TYPE=Release
-DCMAKE_CXX_COMPILER=clang++ -DCMAKE_C_COMPILER=clang
-DLLVM_ENABLE_ASSERTIONS=OFF -DLLVM_USE_LINKER=lld
-DLLVM_ENABLE_DUMP=OFF -DLLVM_ENABLE_PROJECTS="clang;clang-tools-extra"
-DLLVM_ENABLE_Z3_SOLVER=ON -DLLVM_TARGETS_TO_BUILD="X86"
```
Built by `clang-14.0.0`.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D124442
Adds basic parsing/sema/serialization support for the
#pragma omp target parallel loop directive.
Differential Revision: https://reviews.llvm.org/D122359
This is a NFC refactoring to change makeIntValWithPtrWidth
and remove getZeroWithPtrWidth to use types when forming values to match
pointer widths. Some targets may have different pointer widths depending
upon address space, so this needs to be comprehended.
Reviewed By: steakhal
Differential Revision: https://reviews.llvm.org/D120134
It turns out llvm::isa<> is variadic, and we could have used this at a
lot of places.
The following patterns:
x && isa<T1>(x) || isa<T2>(x) ...
Will be replaced by:
isa_and_non_null<T1, T2, ...>(x)
Sometimes it caused further simplifications, when it would cause even
more code smell.
Aside from this, keep in mind that within `assert()` or any macro
functions, we need to wrap the isa<> expression within a parenthesis,
due to the parsing of the comma.
Reviewed By: martong
Differential Revision: https://reviews.llvm.org/D111982
This patch supports OpenMP 5.0 metadirective features.
It is implemented keeping the OpenMP 5.1 features like dynamic user condition in mind.
A new function, getBestWhenMatchForContext, is defined in llvm/Frontend/OpenMP/OMPContext.h
Currently this function return the index of the when clause with the highest score from the ones applicable in the Context.
But this function is declared with an array which can be used in OpenMP 5.1 implementation to select all the valid when clauses which can be resolved in runtime. Currently this array is set to null by default and its implementation is left for future.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D91944
This patch supports OpenMP 5.0 metadirective features.
It is implemented keeping the OpenMP 5.1 features like dynamic user condition in mind.
A new function, getBestWhenMatchForContext, is defined in llvm/Frontend/OpenMP/OMPContext.h
Currently this function return the index of the when clause with the highest score from the ones applicable in the Context.
But this function is declared with an array which can be used in OpenMP 5.1 implementation to select all the valid when clauses which can be resolved in runtime. Currently this array is set to null by default and its implementation is left for future.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D91944
This patch supports OpenMP 5.0 metadirective features.
It is implemented keeping the OpenMP 5.1 features like dynamic user condition in mind.
A new function, getBestWhenMatchForContext, is defined in llvm/Frontend/OpenMP/OMPContext.h
Currently this function return the index of the when clause with the highest score from the ones applicable in the Context.
But this function is declared with an array which can be used in OpenMP 5.1 implementation to select all the valid when clauses which can be resolved in runtime. Currently this array is set to null by default and its implementation is left for future.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D91944
Implementation of the unroll directive introduced in OpenMP 5.1. Follows the approach from D76342 for the tile directive (i.e. AST-based, not using the OpenMPIRBuilder). Tries to use `llvm.loop.unroll.*` metadata where possible, but has to fall back to an AST representation of the outer loop if the partially unrolled generated loop is associated with another directive (because it needs to compute the number of iterations).
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D99459
The original version of this was reverted, and @rjmcall provided some
advice to architect a new solution. This is that solution.
This implements a builtin to provide a unique name that is stable across
compilations of this TU for the purposes of implementing the library
component of the unnamed kernel feature of SYCL. It does this by
running the Itanium mangler with a few modifications.
Because it is somewhat common to wrap non-kernel-related lambdas in
macros that aren't present on the device (such as for logging), this
uniquely generates an ID for all lambdas involved in the naming of a
kernel. It uses the lambda-mangling number to do this, except replaces
this with its own number (starting at 10000 for readabililty reasons)
for lambdas used to name a kernel.
Additionally, this implements itself as constexpr with a slight catch:
if a name would be invalidated by the use of this lambda in a later
kernel invocation, it is diagnosed as an error (see the Sema tests).
Differential Revision: https://reviews.llvm.org/D103112
Added basic parsing/sema/serialization support for interop directive.
Support for the 'init' clause.
Differential Revision: https://reviews.llvm.org/D98558
There is no syntax like {@code ...} in Doxygen, @code is a block command
that ends with @endcode, and generally these are not enclosed in braces.
The correct syntax for inline code snippets is @c <code>.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D98665
The tile directive is in OpenMP's Technical Report 8 and foreseeably will be part of the upcoming OpenMP 5.1 standard.
This implementation is based on an AST transformation providing a de-sugared loop nest. This makes it simple to forward the de-sugared transformation to loop associated directives taking the tiled loops. In contrast to other loop associated directives, the OMPTileDirective does not use CapturedStmts. Letting loop associated directives consume loops from different capture context would be difficult.
A significant amount of code generation logic is taking place in the Sema class. Eventually, I would prefer if these would move into the CodeGen component such that we could make use of the OpenMPIRBuilder, together with flang. Only expressions converting between the language's iteration variable and the logical iteration space need to take place in the semantic analyzer: Getting the of iterations (e.g. the overload resolution of `std::distance`) and converting the logical iteration number to the iteration variable (e.g. overload resolution of `iteration + .omp.iv`). In clang, only CXXForRangeStmt is also represented by its de-sugared components. However, OpenMP loop are not defined as syntatic sugar. Starting with an AST-based approach allows us to gradually move generated AST statements into CodeGen, instead all at once.
I would also like to refactor `checkOpenMPLoop` into its functionalities in a follow-up. In this patch it is used twice. Once for checking proper nesting and emitting diagnostics, and additionally for deriving the logical iteration space per-loop (instead of for the loop nest).
Differential Revision: https://reviews.llvm.org/D76342
This is being recommitted to try and address the MSVC complaint.
This patch implements a DDG printer pass that generates a graph in
the DOT description language, providing a more visually appealing
representation of the DDG. Similar to the CFG DOT printer, this
functionality is provided under an option called -dot-ddg and can
be generated in a less verbose mode under -dot-ddg-only option.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D90159
