There are matching store opcodes (stfd, stxsiwx) for the load opcodes
that make 32-bit and 64-bit vector operations cheap with VSX, so stores
should also be cheap.
This custom DAG combine works on a shuffle where one source vector is a
zero splat, which means we can adjust the shuffle indices to refer to
any element of the splat -- as long as we stay in the same vector.
In the case where an undef (-1) index into the non-splat vector was
used, we ended up adjusting the splat index to -1+NumElements, which
points into the wrong vector.
Fix this by using the first element from the splat if the other one is undef.
There are four cases this theoretically affects, but in practice I only
managed to demonstrate a miscompile with one of them. I think two of
theses are effectively dead due to the operand canonicalization at the
start of the transform.
Fixes https://github.com/llvm/llvm-project/issues/77748.
`llvm.trap` is lowered to `PPC::TRAP` and `PPC::TRAP` is set as
terminator. Verifier complains about terminator should not lie in the
middle of an MBB. See #77095.
Fix it by removing `isTerminator` and `isBarrier` and then set `isTrap`
which was introduced by https://reviews.llvm.org/D48836# and is being
used by X86 and AArch64.
`PPC::TRAP` is not a hardware memory barrier and `llvm.trap` doesn't
indicate a memory barrier either.
This is the logical equivalent for #76710 for APInt and uses the same
naming scheme.
Converted existing users through:
`git grep -l "cast<ConstantSDNode>\(.*\).*getAPIntValueValue" | xargs
sed -E -i
's/cast<ConstantSDNode>\((.*)\)->getAPIntValue/\1->getAsAPIntVal/'`
This follows on from #76708, allowing
`cast<ConstantSDNode>(N)->getZExtValue()` to be replaced with just
`N->getAsZextVal();`
Introduced via `git grep -l "cast<ConstantSDNode>\(.*\).*getZExtValue" |
xargs sed -E -i
's/cast<ConstantSDNode>\((.*)\)->getZExtValue/\1->getAsZExtVal/'` and
then using `git clang-format` on the result.
Vectors are always bit-packed and don't respect the elements' alignment
requirements. This is different from arrays. This means offsets of
vector GEPs need to be computed differently than offsets of array GEPs.
This PR fixes many places that rely on an incorrect pattern
that always relies on `DL.getTypeAllocSize(GTI.getIndexedType())`.
We replace these by usages of `GTI.getSequentialElementStride(DL)`,
which is a new helper function added in this PR.
This changes behavior for GEPs into vectors with element types for which
the (bit) size and alloc size is different. This includes two cases:
* Types with a bit size that is not a multiple of a byte, e.g. i1.
GEPs into such vectors are questionable to begin with, as some elements
are not even addressable.
* Overaligned types, e.g. i16 with 32-bit alignment.
Existing tests are unaffected, but a miscompilation of a new test is fixed.
---------
Co-authored-by: Nikita Popov <github@npopov.com>
This helper function shortens examples like
`cast<ConstantSDNode>(Node->getOperand(1))->getZExtValue();` to
`Node->getConstantOperandVal(1);`.
Implemented with:
`git grep -l
"cast<ConstantSDNode>\(.*->getOperand\(.*\)\)->getZExtValue\(\)" | xargs
sed -E -i
's/cast<ConstantSDNode>\((.*)->getOperand\((.*)\)\)->getZExtValue\(\)/\1->getConstantOperandVal(\2)/`
and `git grep -l
"cast<ConstantSDNode>\(.*\.getOperand\(.*\)\)->getZExtValue\(\)" | xargs
sed -E -i
's/cast<ConstantSDNode>\((.*)\.getOperand\((.*)\)\)->getZExtValue\(\)/\1.getConstantOperandVal(\2)/'`.
With a couple of simple manual fixes needed. Result then processed by
`git clang-format`.
Branch-absolute instructions are currently printed in decimal, and
negative addresses are printed as positive numbers.
With this change, addresses are printed in hex and negative addresses
are converted to an unsigned 32- or 64-bit address.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
This patch adds the majority of the missing extended mnemonics that were
introduced in Power 10.
The only extended mnemonics that were not added are related to the plq
and pstq instructions. These will be added in a separate patch as the
instructions themselves would also have to be added.
12 bit is not enough for PPC's target specific flags. If 8 bit for the
bitmask flags, 4 bit for the direct mask, PPC can total have 16 direct
mask and 8 bitmask. Not enough for PPC, see this issue in
https://github.com/llvm/llvm-project/pull/66316
Redesign how PPC target set the target specific flags. With this patch,
all ppc target flags are direct flags. No bitmask flag in PPC anymore.
This patch aligns with some targets like X86 which also has many target
specific flags.
The patch also fixes a bug related to flag `MO_TLSGDM_FLAG` and `MO_LO`.
They are the same value and the test case changes in this PR shows the
bug.
These are picked up from getMemOperandsWithOffsetWidth but weren't then
being passed through to shouldClusterMemOps, which forces backends to
collect the information again if they want to use the kind of heuristics
typically used for the similar shouldScheduleLoadsNear function (e.g.
checking the offset is within 1 cache line).
This patch just adds the parameters, but doesn't attempt to use them.
There is potential to use them in the current PPC and AArch64
shouldClusterMemOps implementation, and I intend to use the offset in
the heuristic for RISC-V. I've left these for future patches in the
interest of being as incremental as possible.
As noted in the review and in an inline FIXME, an ElementCount-style abstraction may later be used to condense these two parameters to one argument. ElementCount isn't quite suitable as it doesn't support negative offsets.
getOperandLatency has the following behavior: it returns -1 as a special
value, negative numbers other than -1 on some target-specific overrides,
or a valid non-negative latency. This behavior can be surprising, as
some callers do arithmetic on these negative values. Change the
interface of getOperandLatency to return a std::optional<unsigned> to
prevent surprises in callers. While at it, change the interface of
getInstrLatency to return unsigned instead of int.
This change was inspired by a refactoring in
TargetSchedModel::computeOperandLatency.
This was modifying a container as it iterated it, which tripped a check
in libstdc++'s debug checks.
Instead, just assign to the item via the reference we already have.
This fixes the following expensive checks failures on my machine:
LLVM :: CodeGen/PowerPC/fp-strict.ll
LLVM :: CodeGen/PowerPC/pr55463.ll
LLVM :: CodeGen/PowerPC/register-pressure.ll
LLVM :: CodeGen/PowerPC/spe.ll
Which are some of the tests noted by #68594.
The string pooling pass was incorrectly pooling global varables that
were part of llvm.used or llvm.compiler.used. This patch fixes the pass
to prevent that by checking each candidate to make sure that it is not
in either of those lists.
Don't blindly copy the original flags from the pre-reassociated
instrutions.
This copied the integer poison flags which are not safe to preserve
after reassociation.
For the FP flags, I think we should only keep the intersection of
the flags. Override setSpecialOperandAttr to do this.
Fixes#72777.
It seems TypeSize is currently broken in the sense that:
TypeSize::Fixed(4) + TypeSize::Scalable(4) => TypeSize::Fixed(8)
without failing its assert that explicitly tests for this case:
assert(LHS.Scalable == RHS.Scalable && ...);
The reason this fails is that `Scalable` is a static method of class
TypeSize,
and LHS and RHS are both objects of class TypeSize. So this is
evaluating
if the pointer to the function Scalable == the pointer to the function
Scalable,
which is always true because LHS and RHS have the same class.
This patch fixes the issue by renaming `TypeSize::Scalable` ->
`TypeSize::getScalable`, as well as `TypeSize::Fixed` to
`TypeSize::getFixed`,
so that it no longer clashes with the variable in
FixedOrScalableQuantity.
The new methods now also better match the coding standard, which
specifies that:
* Variable names should be nouns (as they represent state)
* Function names should be verb phrases (as they represent actions)
Track the live register state immediately before, instead of after,
MBBI. This makes it simple to track the state at the start or end of a
basic block without a separate (and poorly named) Tracking flag.
This changes the API of the backward(MachineBasicBlock::iterator I)
method, which now recedes to the state just before, instead of just
after, *I. Some clients are simplified by this change.
There is one small functional change shown in the lit tests where
multiple spilled registers all need to be reloaded before the same
instruction. The reloads will now be inserted in the opposite order.
This should not affect correctness.
Previously they were passed by non-const reference. No in tree target
modifies the values.
This makes it possible to call assignValueToAddress from
assignCustomValue without a const_cast. For example in this patch
https://github.com/llvm/llvm-project/pull/69138.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an
enum. This patch replaces support::{big,little,native} with
llvm::endianness::{big,little,native}.
