This patch canonicalizes getelementptr instructions with constant
indices to use the `i8` source element type. This makes it easier for
optimizations to recognize that two GEPs are identical, because they
don't need to see past many different ways to express the same offset.
This is a first step towards
https://discourse.llvm.org/t/rfc-replacing-getelementptr-with-ptradd/68699.
This is limited to constant GEPs only for now, as they have a clear
canonical form, while we're not yet sure how exactly to deal with
variable indices.
The test llvm/test/Transforms/PhaseOrdering/switch_with_geps.ll gives
two representative examples of the kind of optimization improvement we
expect from this change. In the first test SimplifyCFG can now realize
that all switch branches are actually the same. In the second test it
can convert it into simple arithmetic. These are representative of
common optimization failures we see in Rust.
Fixes https://github.com/llvm/llvm-project/issues/69841.
At the moment, block and edge masks are created on demand, which means
that they are inserted at the point where they are demanded and then
cached. It is possible that the mask for a block is looked up later at a
point that's not dominated by the point where the mask has been
inserted.
To avoid this, create masks up front on entry to the corresponding basic
block and leave it to VPlan simplification to remove unneeded masks.
Note that we need to create masks for all blocks, if any of the blocks
in the loop needs predication, as computing the mask of a block depends
on the masks of its predecessor.
Needed for #76090.
https://github.com/llvm/llvm-project/pull/76635
As suggested as follow-up in
https://github.com/llvm/llvm-project/pull/72164, manage inbounds via
VPRecipeWithIRFlags.
Note that in some cases we can now preserve inbounds in a few more
cases.
This patch tries to flip the signedness of predicates when folding an
unsigned icmp with a signed min/max. It will enable more optimizations
as we canonicalizes a signed icmp into an unsigned icmp when both
operands are known to have the same sign.
Fixes#76672.
Compile-time impact:
http://llvm-compile-time-tracker.com/compare.php?from=949ec83eaf6fa6dbffb94c2ea9c0a4d5efdbd239&to=2deca1aea8a4e13609bab72c522a97d424f0fc2d&stat=instructions:u
|stage1-O3|stage1-ReleaseThinLTO|stage1-ReleaseLTO-g|stage1-O0-g|stage2-O3|stage2-O0-g|stage2-clang|
|--|--|--|--|--|--|--|
|-0.00%|+0.01%|+0.05%|-0.12%|-0.01%|-0.03%|-0.00%|
NOTE: We can flip the signedness of predicate if both operands are
negative. But I don't see the benefit of handling these cases.
[LV] Change loops' interleave count computation
A set of microbenchmarks in llvm-test-suite (https://github.com/llvm/llvm-test-suite/pull/56), when tested on a AArch64 platform, demonstrates that loop interleaving is beneficial when the vector loop runs at least twice or when the epilogue loop trip count (TC) is minimal. Therefore, we choose interleaving count (IC) between TC/VF & TC/2*VF (VF = vectorization factor), such that remainder TC for the epilogue loop is minimum while the IC is maximum in case the remainder TC is same for both.
The initial tests for this change were submitted in PRs:
https://github.com/llvm/llvm-project/pull/70272 and https://github.com/llvm/llvm-project/pull/74689.
Move vector pointer generation to a separate VPVectorPointerRecipe.
This untangles address computation from the memory recipes future
and is also needed to enable explicit unrolling in VPlan.
https://github.com/llvm/llvm-project/pull/72164
This adds support for using dominating conditions in computeKnownBits()
when called from InstCombine. The implementation uses a
DomConditionCache, which stores which branches may provide information
that is relevant for a given value.
DomConditionCache is similar to AssumptionCache, but does not try to do
any kind of automatic tracking. Relevant branches have to be explicitly
registered and invalidated values explicitly removed. The necessary
tracking is done inside InstCombine.
The reason why this doesn't just do exactly the same thing as
AssumptionCache is that a lot more transforms touch branches and branch
conditions than assumptions. AssumptionCache is an immutable analysis
and mostly gets away with this because only a handful of places have to
register additional assumptions (mostly as a result of cloning). This is
very much not the case for branches.
This change regresses compile-time by about ~0.2%. It also improves
stage2-O0-g builds by about ~0.2%, which indicates that this change results
in additional optimizations inside clang itself.
Fixes https://github.com/llvm/llvm-project/issues/74242.
A new disjoint flag was added for OR instructions in #72583.
Update VPRecipeWithIRFlags to also support the new flag. This
allows printing and preserving the disjoint flag in vectorized code.
Compiler crashes when the assertion triggered for zext nneg instruction,
that checks that the instruction cannot produce poison. Changed the base
class for widencast recipe to handle dropping nneg flag to avoid
compiler crash.
These tests rely on SCEV looking recognizing an "or" with no common
bits as an "add". Add the disjoint flag to relevant or instructions
in preparation for switching SCEV to use the flag instead of the
ValueTracking query. The IR with disjoint flag matches what
InstCombine would produce.
The disjoint flag was recently added to IR in #72583
We already set it when we turn an add into an or. This patch sets it on Ors that weren't converted from an Add.
Reverse mask early on when populating BlockInMask. This will enable
separating mask management and address computation from the memory
recipes in the future and is also needed to enable explicit unrolling in
VPlan.
Support recipes without underlying instruction in
collectPoisonGeneratingRecipes by directly trying to dyn_cast_or_null
the underlying value.
Fixes https://github.com/llvm/llvm-project/issues/70590.
BlockFrequencyInfo calculates block frequencies as Scaled64 numbers but as a last step converts them to unsigned 64bit integers (`BlockFrequency`). This improves the factors picked for this conversion so that:
* Avoid big numbers close to UINT64_MAX to avoid users overflowing/saturating when adding multiply frequencies together or when multiplying with integers. This leaves the topmost 10 bits unused to allow for some room.
* Spread the difference between hottest/coldest block as much as possible to increase precision.
* If the hot/cold spread cannot be represented loose precision at the lower end, but keep the frequencies at the upper end for hot blocks differentiable.
This patch generalizes the fold of `icmp pred min/max(X, Y), Z` to address the issue https://github.com/llvm/llvm-project/issues/62898.
For example, we can fold `smin(X, Y) < Z` into `X < Z` when `Y > Z` is implied by constant folds/invariants/dom conditions.
Alive2 (with `--disable-undef-input` due to the limitation of --smt-to=10000): https://alive2.llvm.org/ce/z/rB7qLc
You can run the standalone translation validation tool `alive-tv` locally to verify these transformations.
```
alive-tv transforms.ll --smt-to=600000 --exit-on-error
```
Reviewed By: goldstein.w.n
Differential Revision: https://reviews.llvm.org/D156238
Split off from D150398 to avoid builder-related diff changes there.
Using IRBuilder to create ICmps simplifies the result if both operands
are constants.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D158332
This is a complete fix for CompleteLoadGroups introduced in
D154309. We need to check for dependency between A and every member of
the load Group of B.
This patch also fixes another miscompile seen when we incorrectly sink stores
below a depending load (see testcase in
interleaved-accesses-sink-store-across-load.ll). This is fixed by
releasing store groups correctly.
This change was previously reverted (e85fd3cbdd68) due to Asan failure with
use-after-free error. A testcase is added and the bug is fixed in this
version of the patch.
Differential Revision: https://reviews.llvm.org/D155520
This reverts commit 245ec675a4e41f7ec24dfc998720bffdc46a6c53.
Recommits eea9258648ce with a fix to only erase the instruction from the
first part if it is defined outside the loop. This fixes a
use-after-free error reported.
Set phi inputs to poison whenever we find a dead edge (either
during initial worklist population or the main InstCombine run),
instead of only doing this for successors of dead blocks.
This means that the phi operand is set to poison even if for
critical edges without an intermediate block.
There are quite a few test changes, because the pattern is fairly
common in vectorizer output, for cases where we know the vectorized
loop will be entered.
This is a complete fix for CompleteLoadGroups introduced in
D154309. We need to check for dependency between A and every member of
the load Group of B.
This patch also fixes another miscompile seen when we incorrectly sink stores
below a depending load (see testcase in
interleaved-accesses-sink-store-across-load.ll). This is fixed by
releasing store groups correctly.
Differential Revision: https://reviews.llvm.org/D155520
This reverts commit eea9258648ce73507f6f85c395de978af659d498.
That commit triggered crashes in the following testcase:
$ cat reduced.c
typedef struct {
int a[8]
} b;
typedef struct {
b *c;
short d
} e;
void f() {
int g;
char *h;
e *i = f;
short j = i->d;
int a = i->c->a[0];
for (;;)
for (; g < a; g++) {
*h = j * i->d >> 8;
h++;
}
}
$ clang -target aarch64-linux-gnu -w -c -O2 reduced.c
Identified another miscompile while working on fixing interleaving's
current miscompile in D154309. This is different from testcases landed in D154309,
since it showcases an incorrect sinking of store (the former testcases
in that review and follow-up ones) showed incorrect hoisting of loads
across stores.
If a candidate VF for epilogue vectorization is greater than the number of
remaining iterations, the epilogue loop would be dead. Skip such factors.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D154264
If a candidate VF for epilogue vectorization is less than the number of
remaining iterations, the epilogue loop would be dead. Skip such factors.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D154264
This patch prevents invalid load groups from being formed, where a load
needs to be moved across a conflicting store.
Once we hit a store that conflicts with a load with an existing
interleave group, we need to stop adding earlier loads to the group, as
this would force hoisting the previous stores in the group across the
conflicting load.
To detect such cases, add a new CompletedLoadGroups set, which is used
to keep track of load groups to which no earlier loads can be added.
Fixes https://github.com/llvm/llvm-project/issues/63602
Reviewed By: anna
Differential Revision: https://reviews.llvm.org/D154309
When a scalar epilogue is required, at least one iteration of the scalar loop
has to execute. Adjust ConstTripCount accordingly to avoid picking a max VF
that results in a dead vector loop.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D154261
Update trip count of test in
pr56319-vector-exit-cond-optimization-epilogue-vectorization.ll to
make sure epilogue vectorization will still trigger after D154261,
checking for the original issue.
Move the original test to limit-vf-by-tripcount.ll for testing new
functionality of D154261.
This reverts commit 02369b75fdd7b5fc5d9b47f1b60587c225918511.
At the moment, live-outs used *only* for the resume values in the scalar
loop are not modeled in VPlan yet. This means first-order recurrence
recipes could be removed, when a scalar epilogue is required and the
only use of a FOR is outside the loop.
Keep treating recurrence recipes as having side-effects for now, to
avoid them being removed.
Fixes#62954.
This patch uses SCEV to check if a value is uniform across a given VF.
The basic idea is to construct SCEVs where the AddRecs of the loop are
adjusted to reflect the version in the vectorized loop (Step multiplied
by VF). We construct a SCEV for the value of the vector lane 0
(offset 0) compare it to the expressions for lanes 1 to the last vector
lane (VF - 1). If they are equal, consider the expression uniform.
While re-writing expressions, we also need to catch expressions we
cannot determine uniformity (e.g. SCEVUnknown).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D148841
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
When generating code for the epilogue vector loop, we need to re-use the
expansion results for induction steps generated for the main vector
loop, as the pre-header of the epilogue vector loop may not dominate the
vector preheader of the epilogue.
This fixes a reported crash. Note that this is a workaround which should
be removed soon once induction resume value creation is handled in VPlan
directly.
