This change is part of this proposal:
https://discourse.llvm.org/t/rfc-all-the-math-intrinsics/78294
- `VecFuncs.def`: define intrinsic to sleef/armpl mapping
- `LegalizerHelper.cpp`: add missing fewerElementsVector handling for
the new atan2 intrinsic
- `AArch64ISelLowering.cpp`: Add arch64 specializations for lowering
like neon instructions
- `AArch64LegalizerInfo.cpp`: Legalize atan2.
Part 5 for Implement the atan2 HLSL Function #70096.
This changes the existing promote logic to lower, so that it can use
normal integer operations. A minor change was needed to fneg lower code
to handle vectors.
This is an implementation of the saturating fp to int conversions for
GlobalISel. On AArch64 the converstion instrctions work this way,
producing saturating results. LegalizerHelper::lowerFPTOINT_SAT is
ported from SDAG.
AArch64 has a lot of existing tests for fptosi_sat, covering a wide
range of types. I have tried to make most of them work all at once, but
a few fall back due to other missing features such as f128 handling for
min/max.
This patch adds a common lower action for `G_FABS`, which generates `and
x8, x8, #0x7fffffffffffffff` to reset the sign bit. The action does not
support vectors since `G_AND` does not support fp128.
This approach is different than what SDAG is doing. SDAG stores the
value onto stack, clears the sign bit in the most significant byte, and
loads the value back into register. This involves multiple memory ops
and sounds slower.
Currently, `getStackAlignment` asserts if the stack alignment wasn't
specified. This makes it inconvenient to use and complicates testing.
This change also makes `exceedsNaturalStackAlignment` method redundant.
- Generate libcall for supported predicates.
- Generate unsupported predicates as combinations of supported
predicates.
- Vectors are scalarized, however some cases like `v3f128_fp128` are still failing, because we failed to legalize G_OR for these types.
GISel now generates the same code as SDAG, however, note the difference
in the `one` case.
This patch enables the target-independent lowering of llvm.lround via
GlobalISel. For SelectionDAG, the instrinsic is custom lowered for
AMDGPU. In order to support vector floating point input for llvm.lround,
this patch extends the target independent APIs and provide support for
scalarizing. pr98950 is needed to let verifier allow vector floating
point types
This reverts commit 740161a9b98c9920dedf1852b5f1c94d0a683af5.
I moved the `ISD` dependencies into the CodeGen portion of the handling,
it's a little awkward but it's the easiest solution I can think of for
now.
This PR adds a new vector intrinsic `@llvm.experimental.vector.compress`
to "compress" data within a vector based on a selection mask, i.e., it
moves all selected values (i.e., where `mask[i] == 1`) to consecutive
lanes in the result vector. A `passthru` vector can be provided, from
which remaining lanes are filled.
The main reason for this is that the existing
`@llvm.masked.compressstore` has very strong constraints in that it can
only write values that were selected, resulting in guard branches for
all targets except AVX-512 (and even there the AMD implementation is
_very_ slow). More instruction sets support "compress" logic, but only
within registers. So to store the values, an additional store is needed.
But this combination is likely significantly faster on many target as it
avoids branches.
In follow up PRs, my plan is to add target-specific lowerings for x86,
SVE, and possibly RISCV. I also want to combine this with a store
instruction, as this is probably a common case and we can avoid some
memory writes in that case.
See [discussion in
forum](https://discourse.llvm.org/t/new-intrinsic-for-masked-vector-compress-without-store/78663)
for initial discussion on the design.
Summary:
The LTO pass and LLD linker have logic in them that forces extraction
and prevent internalization of needed runtime calls. However, these
currently take all RTLibcalls into account, even if the target does not
support them. The target opts-out of a libcall if it sets its name to
nullptr. This patch pulls this logic out into a class in the header so
that LTO / lld can use it to determine if a symbol actually needs to be
kept.
This is important for targets like AMDGPU that want to be able to use
`lld` to perform the final link step, but does not want the overhead of
uncalled functions. (This adds like a second to the link time trivially)
Attempts to handle illegal G_CONCAT_VECTOR instructions by bitcasting the source
into scalar values and using G_BUILD_VECTOR instead
Treating the G_CONCAT_VECTORS instruction in the legalization artefact by folding
away concat(bitcast, ...) into buildvector(...) would require check for ImpDef created
by the shuffles in llvm.
Previously we had the same instructions being generated for `ISD::CTLZ` and `ISD::CTLZ_ZERO_UNDEF` which did not take advantage of the fact that zero is an invalid input for `ISD::CTLZ_ZERO_UNDEF`. This commit separates codegen for the two cases to allow for the optimization for the latter case.
The details of the optimization are outlined in #82075Fixes#82075
Co-authored-by: Manish Kausik H <hmamishkausik@gmail.com>
We masked out the sign bit from one value, and the non-sign bits
from the other so there should be no common bits set.
No idea how to test this on the DAG path, other than scraping
the debug logs. A few targets hit this path with f16 values, but
the resulting i16 ors get anyext promoted and lose the disjoint
flag. In the fp128 case, PPC gets further and the or loses the flag
somewhere else later. Adding a haveNoCommonBits assert shows this
works though.
Any fp128 need to end up as libcall, as will f32->i128 and f64->i128.
f16 are a bit special as the maximum range of the result fits in a i17,
so can be shrank to an i64. Vector with i128/fp128 types are scalarized.
As far as I can tell, this pull request was not approved, and
did not go through an RFC on discourse.
This reverts commit 89881480030f48f83af668175b70a9798edca2fb.
This reverts commit 225d8fc8eb24fb797154c1ef6dcbe5ba033142da.
Currently, on different platform, the behaivor of llvm.minnum is
different if one operand is sNaN:
When we compare sNaN vs NUM:
ARM/AArch64/PowerPC: follow the IEEE754-2008's minNUM: return qNaN.
RISC-V/Hexagon follow the IEEE754-2019's minimumNumber: return NUM. X86:
Returns NUM but not same with IEEE754-2019's minimumNumber as
+0.0 is not always greater than -0.0.
MIPS/LoongArch/Generic: return NUM.
LIBCALL: returns qNaN.
So, let's introduce llvm.minmumnum/llvm.maximumnum, which always follow
IEEE754-2019's minimumNumber/maximumNumber.
Half-fix: #93033
This change is an implementation of #87367's investigation on supporting
IEEE math operations as intrinsics.
Which was discussed in this RFC:
https://discourse.llvm.org/t/rfc-all-the-math-intrinsics/78294
Much of this change was following how G_FSIN and G_FCOS were used.
Changes:
- `llvm/docs/GlobalISel/GenericOpcode.rst` - Document the `G_FTAN`
opcode
- `llvm/docs/LangRef.rst` - Document the tan intrinsic
- `llvm/include/llvm/Analysis/VecFuncs.def` - Associate the tan
intrinsic as a vector function similar to the tanf libcall.
- `llvm/include/llvm/CodeGen/BasicTTIImpl.h` - Map the tan intrinsic to
`ISD::FTAN`
- `llvm/include/llvm/CodeGen/ISDOpcodes.h` - Define ISD opcodes for
`FTAN` and `STRICT_FTAN`
- `llvm/include/llvm/IR/Intrinsics.td` - Create the tan intrinsic
- `llvm/include/llvm/IR/RuntimeLibcalls.def` - Define tan libcall
mappings
- `llvm/include/llvm/Target/GenericOpcodes.td` - Define the `G_FTAN`
Opcode
- `llvm/include/llvm/Support/TargetOpcodes.def` - Create a `G_FTAN`
Opcode handler
- `llvm/include/llvm/Target/GlobalISel/SelectionDAGCompat.td` - Map
`G_FTAN` to `ftan`
- `llvm/include/llvm/Target/TargetSelectionDAG.td` - Define `ftan`,
`strict_ftan`, and `any_ftan` and map them to the ISD opcodes for `FTAN`
and `STRICT_FTAN`
- `llvm/lib/Analysis/VectorUtils.cpp` - Associate the tan intrinsic as a
vector intrinsic
- `llvm/lib/CodeGen/GlobalISel/IRTranslator.cpp` Map the tan intrinsic
to `G_FTAN` Opcode
- `llvm/lib/CodeGen/GlobalISel/LegalizerHelper.cpp` - Add `G_FTAN` to
the list of floating point math operations also associate `G_FTAN` with
the `TAN_F` runtime lib.
- `llvm/lib/CodeGen/GlobalISel/Utils.cpp` - More floating point math
operation common behaviors.
- llvm/lib/CodeGen/SelectionDAG/LegalizeDAG.cpp - List the function
expansion operations for `FTAN` and `STRICT_FTAN`. Also define both
opcodes in `PromoteNode`.
- `llvm/lib/CodeGen/SelectionDAG/LegalizeFloatTypes.cpp` - More `FTAN`
and `STRICT_FTAN` handling in the legalizer
- `llvm/lib/CodeGen/SelectionDAG/LegalizeTypes.h` - Define
`SoftenFloatRes_FTAN` and `ExpandFloatRes_FTAN`.
- `llvm/lib/CodeGen/SelectionDAG/LegalizeVectorOps.cpp` - Define `FTAN`
as a legal vector operation.
- `llvm/lib/CodeGen/SelectionDAG/LegalizeVectorTypes.cpp` - Define
`FTAN` as a legal vector operation.
- `llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp` - define tan as an
intrinsic that doesn't return NaN.
- `llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp` Map
`LibFunc_tan`, `LibFunc_tanf`, and `LibFunc_tanl` to `ISD::FTAN`. Map
`Intrinsic::tan` to `ISD::FTAN` and add selection dag handling for
`Intrinsic::tan`.
- `llvm/lib/CodeGen/SelectionDAG/SelectionDAGDumper.cpp` - Define `ftan`
and `strict_ftan` names for the equivalent ISD opcodes.
- `llvm/lib/CodeGen/TargetLoweringBase.cpp` -Define a Tan128 libcall and
ISD::FTAN as a target lowering action.
- `llvm/lib/Target/X86/X86ISelLowering.cpp` - Add x86_64 lowering for
tan intrinsic
resolves https://github.com/llvm/llvm-project/issues/70082
The testing we have for vector ptradd was a bit lacking. In adding tests
this patch found a couple of issues mostly with the way v3 vectors of
ptrs were sometimes legalized via i64, and with non-i64 additions. It
does not attempt to fix the issue with mergevalues from returning vector
ptrs.
This hooks up G_INTRINSIC_LLRINT instructions, very similar to the lrint
nodes that already exist. On AArch64 they are treated the same as lrint
with the default return types.
Currently the inserted mergelike instructions will be inserted at the
location of the G_PHI. Seems like the behaviour was correct before, but
the rework done in https://reviews.llvm.org/D114198 forgot to include
the part which makes sure the instructions will be inserted after all
the G_PHIs.
This extends the legalization of lrint, adding libcall support for
fp128. The old vector legal types were removed as they were not being
properly handled (vector lrint is a fairly new concept as far as I
understand). They can be re-added properly in a followup.
This patch legalizes G_ZEXT, G_SEXT, and G_ANYEXT. If the type is a
legal mask type, then the instruction is legalized as the element-wise
select, where the condition on the select is the mask typed source
operand, and the true and false values are 1 or -1 (for
zero/any-extension and sign extension) and zero. If the type is a legal integer
or vector integer type, then the instruction is marked as legal.
The legalization of the extends may introduce a G_SPLAT_VECTOR, which
needs to be legalized in this patch for the extend test cases to pass.
A G_SPLAT_VECTOR is legal if the vector type is a legal integer or
floating point vector type and the source operand is sXLen type. This is
because the SelectionDAG patterns only support sXLen typed
ISD::SPLAT_VECTORS, and we'd like to reuse those patterns. A
G_SPLAT_VECTOR is cutom legalized if it has a legal s1 element vector
type and s1 scalar operand. It is legalized to G_VMSET_VL or G_VMCLR_VL
if the splat is all ones or all zeros respectivley. In the case of a
non-constant mask splat, we legalize by promoting the scalar value to
s8.
In order to get the s8 element vector back into s1 vector, we use a
G_ICMP. In order for the splat vector and extend tests to pass, we also
need to legalize G_ICMP in this patch.
A G_ICMP is legal if the destination type is a legal bool vector and the LHS and
RHS are legal integer vector types.
G_VSCALE should be lowered using VLENB. If the type is not sXLen it
should be lowered using a G_VSCALE on the narrow type and a G_MUL.
regbank select and instruction select are straightforward so we really
only need to add tests to show it works.
