In most cases when an instruction or function call clobbers fp and/or bp
register, we can fix it by save/restore the clobbered register. But we
still can't handle it when an invoked function clobbers fp and/or bp
according to its calling convention. This patch detects this case and
reports error instead of silently generating wrong code.
Most functions don't clobber frame register and base pointer. They are
usually caused by inline asm and function call. So we can record if a
function call clobber FP/BP at lowering phase, and later we can check
the recorded information and return early.
#73092 supported the encoding/decoding for PUSHP/POPP
#73233 supported the encoding/decoding for PUSH2[P]/POP2[P]
In this patch, we teach frame lowering to spill/reload registers w/
these instructions.
1. Use PPX for balanced spill/reload
2. Use PUSH2/POP2 for continuous spills/reloads
3. PUSH2/POP2 must be 16B-aligned on the stack, so pad when necessary
Without frame pointers, the locations of variables on the stack are emitted
relative to the stack pointer (via the stack pointer being the value of
DW_AT_frame_base on the subprogram). If a call modifies the stack pointer
this results in the locations being wrong and the debugger displaying the
wrong values for variables.
By using DW_OP_call_frame_cfa in these situations the emitted location for
the variable will automatically handle changes in the stack pointer
(provided LLVM is emitting the correct CFI directives elsewhere, of course).
The CFA needs to be adjusted for the size of the stack frame (including the
return address) to allow the variable locations themselves to remain
unchanged by this patch.
Certain LLDB features cannot cope with DW_OP_call_frame_cfa, so this change
is heuristically limited to the cases where it's necessary for correctness
to minimize the fallout there.
Reviewed By: #debug-info, scott.linder, jryans, jmorse
Differential Revision: https://reviews.llvm.org/D143463
Fix some bugs and reland e4c1dfed38370b4 and 614c63bec6d67c.
1. Run argument stack rebase pass before the reserved physical register
is finalized.
2. Add LEA pseudo instruction to prevent the instruction being
eliminated.
3. Don't support X32.
The base pointer register is reserved by compiler when there is
dynamic size alloca and stack realign in a function. However the
base pointer register is not defined in X86 ABI, so user can use
this register in inline assembly. The inline assembly would
clobber base pointer register without being awared by user. This
patch is to create extra prolog to save the stack pointer to a
scratch register and use this register to reference argument from
stack. For some calling convention (e.g. regcall), there may be
few scratch register.
Below is the example code for such case.
```
extern int bar(void *p);
long long foo(size_t size, char c, int id) {
__attribute__((__aligned__(64))) int a;
char *p = (char *)alloca(size);
asm volatile ("nop"::"S"(405):);
asm volatile ("movl %0, %1"::"r"(id), "m"(a):);
p[2] = 8;
memset(p, c, size);
return bar(p);
}
```
And below prolog/epilog will be emit for this case.
```
leal 4(%esp), %ebx
.cfi_def_cfa %ebx, 0
andl $-128, %esp
pushl -4(%ebx)
...
leal 4(%ebx), %esp
.cfi_def_cfa %esp, 4
```
Differential Revision: https://reviews.llvm.org/D145650
Previous the stack slot for spilling base pointer register is allocated
after the stack realignment. When the stack is naturally aligned the
stack slot is share with other data that allocated from stack and cause
data corrupt. Another issue is the stack slot for save/restore the
callee saved register is not fixed for each function. It depends on the
register usage of them in each function.
This patch is to recalculate the offset the stack slot for base pointer
register during the prolog/epilog insert pass, and allocate the stack
slot when spilling callee saved registers.
Differential Revision: https://reviews.llvm.org/D144625
This fixes what I consider to be an API flaw I've tripped over
multiple times. The point this is constructed isn't well defined, so
depending on where this is first called, you can conclude different
information based on the MachineFunction. For example, the AMDGPU
implementation inspected the MachineFrameInfo on construction for the
stack objects and if the frame has calls. This kind of worked in
SelectionDAG which visited all allocas up front, but broke in
GlobalISel which hasn't visited any of the IR when arguments are
lowered.
I've run into similar problems before with the MIR parser and trying
to make use of other MachineFunction fields, so I think it's best to
just categorically disallow dependency on the MachineFunction state in
the constructor and to always construct this at the same time as the
MachineFunction itself.
A missing feature I still could use is a way to access an custom
analysis pass on the IR here.
MIR support is totally unusable for AMDGPU without this, since the set
of reserved registers is set from fields here.
Add a clone method to MachineFunctionInfo. This is a subtle variant of
the copy constructor that is required if there are any MIR constructs
that use pointers. Specifically, at minimum fields that reference
MachineBasicBlocks or the MachineFunction need to be adjusted to the
values in the new function.
ValueMap should only be necessary if the IR values can be
replaced. This is only used during codegen, when it's illegal to
change the underlying IR. This allows using the default copy
constructor for X86MachineFunctionInfo.
I'm not happy about targets keeping state here that's only used in one
specific pass, but we don't have a better place to put it right now.
We should avoid mixing old AMX instrinsic with new AMX intrinsic. For
old AMX intrinsic, user is responsible for invoking tile release. This
patch is to check if there is any tile config generated by compiler. If
so it emit tilerelease instruction, otherwise it don't emit the
instruction.
Differential Revision: https://reviews.llvm.org/D114066
For x86 Darwin, we have a stack checking feature which re-uses some of this
machinery around stack probing on Windows. Renaming this to be more appropriate
for a generic feature.
Differential Revision: https://reviews.llvm.org/D109993
This adds support to the X86 backend for the newly committed swiftasync
function parameter. If such a (pointer) parameter is present it gets stored
into an augmented frame record (populated in IR, but generally containing
enhanced backtrace for coroutines using lots of tail calls back and forth).
The context frame is identical to AArch64 (primarily so that unwinders etc
don't get extra complexity). Specfically, the new frame record is [AsyncCtx,
%rbp, ReturnAddr], and its presence is signalled by bit 60 of the stored %rbp
being set to 1. %rbp still points to the frame pointer in memory for backwards
compatibility (only partial on x86, but OTOH the weird AsyncCtx before the rest
of the record is because of x86).
Recommited with a fix for unwind info when i386 pc-rel thunks are
adjacent to a prologue.
This reverts commit 747e5cfb9f5d944b47fe014925b0d5dc2fda74d7.
Reason: New frame layout broke the sanitizer unwinder. Not clear why,
but seems like some of the changes aren't always guarded by Swyft
checks. See
https://reviews.llvm.org/rG747e5cfb9f5d944b47fe014925b0d5dc2fda74d7 for
more information.
This adds support to the X86 backend for the newly committed swiftasync
function parameter. If such a (pointer) parameter is present it gets stored
into an augmented frame record (populated in IR, but generally containing
enhanced backtrace for coroutines using lots of tail calls back and forth).
The context frame is identical to AArch64 (primarily so that unwinders etc
don't get extra complexity). Specfically, the new frame record is [AsyncCtx,
%rbp, ReturnAddr], and its presence is signalled by bit 60 of the stored %rbp
being set to 1. %rbp still points to the frame pointer in memory for backwards
compatibility (only partial on x86, but OTOH the weird AsyncCtx before the rest
of the record is because of x86).
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
Summary:
This is an alternate approach to D63396
Currently funclets reuse the same stack slots that are used in the
parent function for saving callee-saved xmm registers. If the parent
function modifies a callee-saved xmm register before an excpetion is
thrown, the catch handler will overwrite the original saved value.
This patch allocates space in funclets stack for saving callee-saved xmm
registers and uses RSP instead RBP to access memory.
Signed-off-by: Pengfei Wang <pengfei.wang@intel.com>
Reviewers: rnk, RKSimon, craig.topper, annita.zhang, LuoYuanke, andrew.w.kaylor
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66596
Signed-off-by: Pengfei Wang <pengfei.wang@intel.com>
llvm-svn: 370005
This reverts r367088 (git commit 9ad565f70ec5fd3531056d7c939302d4ea970c83)
And the follow up fix r368631 / e9865b9b31bb2e6bc742dc6fca8f9f9517c3c43e
llvm-svn: 369457
Summary:
This is an alternate approach to D57970.
Currently funclets reuse the same stack slots that are used in the
parent function for saving callee-saved xmm registers. If the parent
function modifies a callee-saved xmm register before an excpetion is
thrown, the catch handler will overwrite the original saved value.
This patch allocates space in funclets stack for saving callee-saved xmm
registers and uses RSP instead RBP to access memory.
Reviewers: andrew.w.kaylor, LuoYuanke, annita.zhang, craig.topper,
RKSimon
Subscribers: rnk, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63396
Signed-off-by: pengfei <pengfei.wang@intel.com>
llvm-svn: 367088
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
with an additional fix to make RegAllocFast ignore undef physreg uses. It would
previously get confused about the "push %eax" instruction's use of eax. That
method for adjusting the stack pointer is used in X86FrameLowering::emitSPUpdate
as well, but since that runs after register-allocation, we didn't run into the
RegAllocFast issue before.
llvm-svn: 269949
This patch moves the expansion of WIN_ALLOCA pseudo-instructions
into a separate pass that walks the CFG and lowers the instructions
based on a conservative estimate of the offset between the stack
pointer and the lowest accessed stack address.
The goal is to reduce binary size and run-time costs by removing
calls to _chkstk. While it doesn't fix all the code quality problems
with inalloca calls, it's an incremental improvement for PR27076.
Differential Revision: http://reviews.llvm.org/D20263
llvm-svn: 269828
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
This is the same as r255936, with added logic for avoiding clobbering of the
red zone (PR26023).
Differential Revision: http://reviews.llvm.org/D18246
llvm-svn: 264375
Bonus change to remove emacs major mode marker from SystemZMachineFunctionInfo.cpp because emacs already knows it's C++ from the extension. Also fix typo "appeary" in AMDGPUMCAsmInfo.h.
llvm-svn: 243585
The incoming EBP value points to the end of a local stack allocation, so
we can use that to restore ESI, the base pointer. Once we do that, we
can use local stack allocations. If we know we need stack realignment,
spill the original frame pointer in the prologue and reload it after
restoring ESI.
llvm-svn: 241648
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
Simply loading or storing the frame pointer is not sufficient for
Windows targets. Instead, create a synthetic frame object that we will
lower later. References to this synthetic object will be replaced with
the correct reference to the frame address.
llvm-svn: 228748
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
(Re-commit of r227728)
Differential Revision: http://reviews.llvm.org/D6789
llvm-svn: 227752
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
Differential Revision: http://reviews.llvm.org/D6789
llvm-svn: 227728
Previously I tried to plug musttail into the existing vararg lowering
code. That turned out to be a mistake, because non-vararg calls use
significantly different register lowering, even on x86. For example, AVX
vectors are usually passed in registers to normal functions and memory
to vararg functions. Now musttail uses a completely separate lowering.
Hopefully this can be used as the basis for non-x86 perfect forwarding.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D6156
llvm-svn: 224745
