This adds the `llvm.sincos` intrinsic, legalization, and lowering.
The `llvm.sincos` intrinsic takes a floating-point value and returns
both the sine and cosine (as a struct).
```
declare { float, float } @llvm.sincos.f32(float %Val)
declare { double, double } @llvm.sincos.f64(double %Val)
declare { x86_fp80, x86_fp80 } @llvm.sincos.f80(x86_fp80 %Val)
declare { fp128, fp128 } @llvm.sincos.f128(fp128 %Val)
declare { ppc_fp128, ppc_fp128 } @llvm.sincos.ppcf128(ppc_fp128 %Val)
declare { <4 x float>, <4 x float> } @llvm.sincos.v4f32(<4 x float> %Val)
```
The lowering is built on top of the existing FSINCOS ISD node, with
additional type legalization to allow for f16, f128, and vector values.
Some tests contain errors in constrained intrinsic usage, such as missed
or extra type parameters, wrong type parameters order and some other.
---------
Co-authored-by: Andy Kaylor <andy_kaylor@yahoo.com>
We don't need to copy byval arguments to tail calls via a temporary, if
we can prove that we are not copying from the outgoing argument area.
This patch does this when the source if the argument is one of:
* Memory in the local stack frame, which can't be used for tail-call
arguments.
* A global variable.
We can also avoid doing the copy completely if the source and
destination are the same memory location, which is the case when the
caller and callee have the same signature, and pass some arguments
through unmodified.
When passing byval arguments to tail-calls, we need to store them into
the stack memory in which this the caller received it's arguments. If
any of the outgoing arguments are forwarded from incoming byval
arguments, then the source of the copy is from the same stack memory.
This can result in the copy corrupting a value which is still to be
read.
The fix is to first make a copy of the outgoing byval arguments in local
stack space, and then copy them to their final location. This fixes the
correctness issue, but results in extra copying, which could be
optimised.
Byval arguments which are passed partially in registers get stored into
the local stack frame, but it is valid to tail-call them because the
part which gets spilled is always re-loaded into registers before doing
the tail-call, so it's OK for the spill area to be deallocated.
The ARM backend was checking that the outgoing values for a tail-call
matched the incoming argument values of the caller. This isn't
necessary, because the caller can change the values in both registers
and the stack before doing the tail-call. The actual limitation is that
the callee can't need more stack space for it's arguments than the
caller does.
This is needed for code using the musttail attribute, as well as
enabling tail calls as an optimisation in more cases.
Before this patch, redundant COPY couldn't be removed for the following
case:
```
$R0 = OP ...
... // Read of %R0
$R1 = COPY killed $R0
```
This patch adds support for tracking the users of the source register
during backward propagation, so that we can remove the redundant COPY in
the above case and optimize it to:
```
$R1 = OP ...
... // Replace all uses of %R0 with $R1
```
Fixes#113154
The encodings used for llvm.trap() on ARM were all marked as barriers
and terminators. This lead to stack frame destroy code being inserted
before the trap if the trap was the last thing in the function and it
had no return statement.
```
void fn() {
volatile int i = 0;
__builtin_trap();
}
```
Produced:
```
fn:
push {r11, lr} << stack frame create
<...>
mov sp, r11
pop {r11, lr} << stack frame destroy
.inst 0xe7ffdefe << trap
bx lr
```
All the other targets don't mark them this way, instead they mark them
with isTrap. I've changed ARM to do this, which fixes the code
generation:
```
fn:
push {r11, lr} << stack frame create
<...>
.inst 0xe7ffdefe << trap
mov sp, r11
pop {r11, lr} << stack frame destroy
bx lr
```
I've updated the existing trap test to force the need for a stack frame,
then check that the instruction immediately after the trap is resetting
the stack pointer.
debugtrap was already working but I've added the same checks for it
anyway.
The previous behavior could be harmful in some edge cases, such as
emitting a call to `fma()` in the `fma()` implementation itself.
Do this by just being more accurate in `isFMAFasterThanFMulAndFAdd()`.
This was already done for PowerPC; this commit just extends that to Arm,
z/Arch, and x86. MIPS and SPARC already got it right, but I added tests
for them too, for good measure.
Note: I don't have commit access.
Some targets (e.g. PPC and Hexagon) already did this. I think it's best
to do this consistently so that frontend authors don't run into
inconsistent results when they emit `naked` functions. For example, in
Zig, we had to change our emit code to also set `frame-pointer=none` to
get reliable results across targets.
Note: I don't have commit access.
ARM uses complex encoding of immediate values using small number of
bits. As a result, some values cannot be represented as immediate
operands, they need to be synthesized in a register. This change
implements legalization of such constants with loading values from
constant pool.
---------
Co-authored-by: Matt Arsenault <arsenm2@gmail.com>
This DAG combine replaces a floating-point load/store pair which has no
other uses with an integer one, but did not copy the memory operand
flags to the new instructions, resulting in it dropping the volatile
flag. This optimisation is still valid if one or both of the
instructions is volatile, so we can copy over the whole
MachineMemOperand to generate volatile integer loads and stores where
needed.
If SETCC or VSELECT is not legal for vector, we should not expand it,
instead we can split the vectors.
So that, some simple scale instructions can be emitted instead of
some pairs of comparation+selection.
When -mno-movt is passed to Clang, the ARM codegen correctly avoids
movt/movw pairs to take the address of __stack_chk_guard in the stack
protector code emitted into the function pro- and epilogues. However,
the Thumb2 codegen fails to do so, and happily emits movw/movt pairs
unless it is generating an ELF binary and the symbol might be in a
different DSO. Let's incorporate a check for useMovt() in the logic
here, so movt/movw are never emitted when -mno-movt is specified.
Suggestions welcome for how/where to add a test case for this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
KnownBits::srem does not correctly set the leader zero-bits, omitting
the fact that LHS may be known-negative or known-non-negative. Fix this.
Alive2 proof: https://alive2.llvm.org/ce/z/Ugh-Dq
We already disallow accessing the callee's allocas from a tail-called
function, because their stack memory will have been de-allocated before
the tail call. I think this should apply to byval arguments too, as they
also occupy space in the caller's stack frame.
This was originally part of #109943, spilt out for separate review.
This helps clean up the patterns a little and will help share combines
on both the intrinsic and VBSP. A combine is then added to fold away the
VBSP if both the selected operands are the same.
Branch instruction alignments were not defined for cortex-m85 and
cortex-m7 which misses an optimisation opportunity. With this patch we
see performance improvements as high as 5% on some benchmarks with most
around 1%.
When expanding a VBSP pseudo into VMOV; VBSL, if the first reg was
killed in the BSP then the kill flags could be incorrect copied to the
mov (vorr) and the vbsl. Drop the kill flags.
Note that this sometimes comes up when all the operands of the VBSP are
the same, which can be optimized separately.
This is a smaller follow on to #105519 that fixes VBICimm and VORRimm
too. The logic behind lowering vector immediates under big endian
Neon/MVE is to treat them in natural lane ordering (same as little
endian), and VECTOR_REG_CAST them to the correct type (as opposed to
creating the constants in big endian form and bitcasting them). This
makes sure that is done when creating VORRIMM and VBICIMM.
These intrinsics currently assume natural alignment. Instead, respect
the alignment attribute on the intrinsic. Teach InstCombine to improve
that alignment.
If desired I could also adjust the clang frontend to add alignment
annotations equivalent to the previous behavior, but I don't see any
indication that such an assumption is correct in the ARM intrinsics
docs.
Fixes https://github.com/llvm/llvm-project/issues/59081.
This test case was failing to compile with a "ran out of registers
during register allocation" error at -O0. This was because CMP_SWAP_64
has 3 operands which must be an even-odd register pair, and two other
GPR operands. All of the def operands are also early-clobber, so
registers can't be shared between uses and defs. Because the function
has an over-aligned alloca it needs frame and base pointers, so r6 and
r11 are both reserved. That leaves r0/r1, r2/r3, r4/r5 and r8/r9 as the
only valid register pairs, and if the two individual GPR operands happen
to get allocated to registers in different pairs then only 2 pairs will
be available for the three GPRPair operands.
To fix this, I've merged the two GPR operands into a single GPRPair
operand. This means that the instruction now has 4 GPRPair operands,
which can always be allocated without relying on luck. This does
constrain register allocation a bit more, but this pseudo instruction is
only used at -O0, so I don't think that's a problem.
This patch is part of a set of patches that add an `-fextend-lifetimes`
flag to clang, which extends the lifetimes of local variables and
parameters for improved debuggability. In addition to that flag, the
patch series adds a pragma to selectively disable `-fextend-lifetimes`,
and an `-fextend-this-ptr` flag which functions as `-fextend-lifetimes`
for this pointers only. All changes and tests in these patches were
written by Wolfgang Pieb (@wolfy1961), while Stephen Tozer (@SLTozer)
has handled review and merging. The extend lifetimes flag is intended to
eventually be set on by `-Og`, as discussed in the RFC
here:
https://discourse.llvm.org/t/rfc-redefine-og-o1-and-add-a-new-level-of-og/72850
This patch implements a new intrinsic instruction in LLVM,
`llvm.fake.use` in IR and `FAKE_USE` in MIR, that takes a single operand
and has no effect other than "using" its operand, to ensure that its
operand remains live until after the fake use. This patch does not emit
fake uses anywhere; the next patch in this sequence causes them to be
emitted from the clang frontend, such that for each variable (or this) a
fake.use operand is inserted at the end of that variable's scope, using
that variable's value. This patch covers everything post-frontend, which
is largely just the basic plumbing for a new intrinsic/instruction,
along with a few steps to preserve the fake uses through optimizations
(such as moving them ahead of a tail call or translating them through
SROA).
Co-authored-by: Stephen Tozer <stephen.tozer@sony.com>
Backend:
- Caller and callee arguments no longer have to match, just to take up the same space, as they can be changed before the call
- Allowed tail calls if callee and callee both (or neither) use sret, wheras before it would be dissalowed if either used sret
- Allowed tail calls if byval args are used
- Added debug trace for IsEligibleForTailCallOptimisation
Frontend (clang):
- Do not generate extra alloca if sret is used with musttail, as the space for the sret is allocated already
Change-Id: Ic7f246a7eca43c06874922d642d7dc44bdfc98ec
If the upper bits of the shr aren't demanded.
This helps with cases where the outer srl was originally an sra and was
converted to a srl by SimplifyDemandedBits before it had a chance to
combine with the inner sra. This can occur when the inner sra was part
of a sign_extend_inreg expansion.
There are some regressions in ARM and Thumb2.
\#92331 tried to make `ObjCARCContractPass` by default, but it caused a
regression on O0 builds and was reverted.
This patch trys to bring that back by:
1. reverts the
[revert](1579e9ca9c).
2. `createObjCARCContractPass` only on optimized builds.
Tests are updated to refelect the changes. Specifically, all `O0` tests
should not include `ObjCARCContractPass`
Signed-off-by: Peter Rong <PeterRong@meta.com>
Always match ABD patterns pre-legalization, and use TargetLowering::expandABD to expand again during legalization.
abdu(lhs, rhs) -> sub(xor(sub(lhs, rhs), usub_overflow(lhs, rhs)), usub_overflow(lhs, rhs))
Alive2: https://alive2.llvm.org/ce/z/dVdMyv
REAPPLIED: Fix regression issue with "abs(ext(x) - ext(y)) -> zext(abd(x, y))" fold failing after type legalization
Always match ABD patterns pre-legalization, and use TargetLowering::expandABD to expand again during legalization.
abdu(lhs, rhs) -> sub(xor(sub(lhs, rhs), usub_overflow(lhs, rhs)), usub_overflow(lhs, rhs))
Alive2: https://alive2.llvm.org/ce/z/dVdMyv
