This patch canonicalizes getelementptr instructions with constant
indices to use the `i8` source element type. This makes it easier for
optimizations to recognize that two GEPs are identical, because they
don't need to see past many different ways to express the same offset.
This is a first step towards
https://discourse.llvm.org/t/rfc-replacing-getelementptr-with-ptradd/68699.
This is limited to constant GEPs only for now, as they have a clear
canonical form, while we're not yet sure how exactly to deal with
variable indices.
The test llvm/test/Transforms/PhaseOrdering/switch_with_geps.ll gives
two representative examples of the kind of optimization improvement we
expect from this change. In the first test SimplifyCFG can now realize
that all switch branches are actually the same. In the second test it
can convert it into simple arithmetic. These are representative of
common optimization failures we see in Rust.
Fixes https://github.com/llvm/llvm-project/issues/69841.
Move vector pointer generation to a separate VPVectorPointerRecipe.
This untangles address computation from the memory recipes future
and is also needed to enable explicit unrolling in VPlan.
https://github.com/llvm/llvm-project/pull/72164
We have a bunch of folds that basically perform X pred Y to ~Y pred ~X
for various special cases where this saves an instruction.
Generalize these folds to use isFreeToInvert(). We have to make sure
that we consume an instruction in either of the inversions, otherwise
we're just going to swap the icmp back and forth.
Fixes https://github.com/llvm/llvm-project/issues/74302.
This adds support for using dominating conditions in computeKnownBits()
when called from InstCombine. The implementation uses a
DomConditionCache, which stores which branches may provide information
that is relevant for a given value.
DomConditionCache is similar to AssumptionCache, but does not try to do
any kind of automatic tracking. Relevant branches have to be explicitly
registered and invalidated values explicitly removed. The necessary
tracking is done inside InstCombine.
The reason why this doesn't just do exactly the same thing as
AssumptionCache is that a lot more transforms touch branches and branch
conditions than assumptions. AssumptionCache is an immutable analysis
and mostly gets away with this because only a handful of places have to
register additional assumptions (mostly as a result of cloning). This is
very much not the case for branches.
This change regresses compile-time by about ~0.2%. It also improves
stage2-O0-g builds by about ~0.2%, which indicates that this change results
in additional optimizations inside clang itself.
Fixes https://github.com/llvm/llvm-project/issues/74242.
This reverts commit 245ec675a4e41f7ec24dfc998720bffdc46a6c53.
Recommits eea9258648ce with a fix to only erase the instruction from the
first part if it is defined outside the loop. This fixes a
use-after-free error reported.
This reverts commit eea9258648ce73507f6f85c395de978af659d498.
That commit triggered crashes in the following testcase:
$ cat reduced.c
typedef struct {
int a[8]
} b;
typedef struct {
b *c;
short d
} e;
void f() {
int g;
char *h;
e *i = f;
short j = i->d;
int a = i->c->a[0];
for (;;)
for (; g < a; g++) {
*h = j * i->d >> 8;
h++;
}
}
$ clang -target aarch64-linux-gnu -w -c -O2 reduced.c
This patch adds metadata to disable runtime unrolling to the vectorized
loop. If runtime unrolling/interleaving is considered profitable, LV
will interleave the loop directly. There should be no need to perform
runtime unrolling at a later stage.
Note that we already add metadata to disable runtime unrolling to the
scalar loop after vectorization.
The additional unrolling unnecessarily increases code size and compile
time. In addition to that we have several bug reports of unncessary
runtime unrolling for vectorized loops, e.g. PR40961
Compile-time improvements:
NewPM-O3: -1.04%
NewPM-ReleaseThinLTO: -0.59%
NewPM-ReleaseLTO-g: -0.97%
https://llvm-compile-time-tracker.com/compare.php?from=ce1be13a868d0f8afa367975558c1a6175cce33a&to=78bc2e67f22e9e10e61cdb6cdac4bb857d95eb1b&stat=instructions:uFixes#40306.
Reviewed By: lebedev.ri, nikic
Differential Revision: https://reviews.llvm.org/D115261
This was originally part of D133788. There are no visible
regressions. All of the diffs show a large unsigned constant
becoming a small negative constant. This should be better
for analysis (and slightly less compile-time) and codegen.
This patch adds initial support for a pointer diff based runtime check
scheme for vectorization. This scheme requires fewer computations and
checks than the existing full overlap checking, if it is applicable.
The main idea is to only check if source and sink of a dependency are
far enough apart so the accesses won't overlap in the vector loop. To do
so, it is sufficient to compute the difference and compare it to the
`VF * UF * AccessSize`. It is sufficient to check
`(Sink - Src) <u VF * UF * AccessSize` to rule out a backwards
dependence in the vector loop with the given VF and UF. If Src >=u Sink,
there is not dependence preventing vectorization, hence the overflow
should not matter and using the ULT should be sufficient.
Note that the initial version is restricted in multiple ways:
1. Pointers must only either be read or written, by a single
instruction (this allows re-constructing source/sink for
dependences with the available information)
2. Source and sink pointers must be add-recs, with matching steps
3. The step must be a constant.
3. abs(step) == AccessSize.
Most of those restrictions can be relaxed in the future.
See https://github.com/llvm/llvm-project/issues/53590.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D119078
The basic idea to this is that a) having a single canonical type makes CSE easier, and b) many of our transforms are inconsistent about which types we end up with based on visit order.
I'm restricting this to constants as for non-constants, we'd have to decide whether the simplicity was worth extra instructions. For constants, there are no extra instructions.
We chose the canonical type as i64 arbitrarily. We might consider changing this to something else in the future if we have cause.
Differential Revision: https://reviews.llvm.org/D115387
This is one of those wonderful "in theory X doesn't matter, but in practice is does" changes. In this particular case, we shift the IVs inserted by the runtime unroller to clamp iteration count of the loops* from decrementing to incrementing.
Why does this matter? A couple of reasons:
* SCEV doesn't have a native subtract node. Instead, all subtracts (A - B) are represented as A + -1 * B and drops any flags invalidated by such. As a result, SCEV is slightly less good at reasoning about edge cases involving decrementing addrecs than incrementing ones. (You can see this in the inferred flags in some of the test cases.)
* Other parts of the optimizer produce incrementing IVs, and they're common in idiomatic source language. We do have support for reversing IVs, but in general if we produce one of each, the pair will persist surprisingly far through the optimizer before being coalesced. (You can see this looking at nearby phis in the test cases.)
Note that if the hardware prefers decrementing (i.e. zero tested) loops, LSR should convert back immediately before codegen.
* Mostly irrelevant detail: The main loop of the prolog case is handled independently and will simple use the original IV with a changed start value. We could in theory use this scheme for all iteration clamping, but that's a larger and more invasive change.
This reverts commit 7cd273c339cfe8427404f881ae280bd9fae6ff78.
Several patches with tests fixes have been applied:
0cada82f0a30e5ae22dce66b58604ab9b47a3897 "[Test] Remove incorrect test in GVN"
97cb13615d6d9df254e3c0f3deef9eaedfe189b6 "[Test] Separate IndVars test into AArch64 and X86 parts"
985cc490f17d28b20392ee214895d947b85120ef "[Test] Remove separated test in IndVars",
and test failures caused by 5ec2386 should be resolved now.
This reapplies patch db289340c841990055a164e8eb2a3b5ff25677bf.
The test failures on build with expensive checks caused by the patch happened due
to the fact that we sorted loop Phis in replaceCongruentIVs using llvm::sort,
which shuffles the given container if the expensive checks are enabled,
so equivalent Phis in the sorted vector had different mutual order from run
to run. replaceCongruentIVs tries to replace narrow Phis with truncations
of wide ones. In some test cases there were several Phis with the same
width, so if their order differs from run to run, the narrow Phis would
be replaced with a different Phi, depending on the shuffling result.
The patch ae14fae0ff4304022beda5ab484f84ac0fdda807 fixed this issue by
replacing llvm::sort with llvm::stable_sort.
In IndVarSimplify after simplifying and extending loop IVs we call 'replaceCongruentIVs'.
This function optionally takes a TTI argument to be able to replace narrow IVs uses
with truncates of the widest one.
For some reason the TTI wasn't passed to the function, so it couldn't perform such
transform.
This patch fixes it.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D113024
Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.
This is a preliminary commit for https://reviews.llvm.org/D99080
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Initially reverted due to BasicAA running analyses in an unspecified
order (multiple function calls as parameters), fixed by fetching
analyses before the call to construct BasicAA.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
We tend to assume that the AA pipeline is by default the default AA
pipeline and it's confusing when it's empty instead.
PR48779
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D95117
This patch updates IRBuilder to create insertelement/shufflevector using poison as a placeholder.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93793
I noticed an add example like the one from D91343, so here's a similar patch.
The logic is based on existing code for the single-use demanded bits fold.
But I only matched a constant instead of using compute known bits on the
operands because that was the motivating patterni that I noticed.
I think this will allow removing a special-case (but incomplete) dedicated
fold within visitAnd(), but I need to untangle the existing code to be sure.
https://rise4fun.com/Alive/V6fP
Name: add with low mask
Pre: (C1 & (-1 u>> countLeadingZeros(C2))) == 0
%a = add i8 %x, C1
%r = and i8 %a, C2
=>
%r = and i8 %x, C2
Differential Revision: https://reviews.llvm.org/D91415
