SUMMARY:
The patch is enable to support Mergeable2ByteCString and Mergeable4ByteCString
Reviewers: daltenty
Subscribers: wuzish, nemanjai, hiraditya
Differential Revision: https://reviews.llvm.org/D74164
Add a simplification to fuse a manual vector extract with shifts and
truncate into a bitcast.
Unpacking and packing values into vectors is only optimized with
extractelement instructions, not when manually unpacked using shifts
and truncates.
This patch simplifies shifts and truncates into a bitcast if possible.
Simplify (build_vec (trunc $1)
(trunc (srl $1 width))
(trunc (srl $1 (2 * width))) ...)
to (bitcast $1)
Differential Revision: https://reviews.llvm.org/D73892
Use the isCandidateForCallSiteEntry().
This should mostly be an NFC, but there are some parts ensuring
the moveCallSiteInfo() and copyCallSiteInfo() operate with call site
entry candidates (both Src and Dest should be the call site entry
candidates).
Differential Revision: https://reviews.llvm.org/D74122
Remove code from LegalizeTypes that allowed this to work.
We were already using BUILD_PAIR for this in some places so this
standardizes on a single way to do this.
Summary:
For CTTZ we place a set bit just past where the non-promoted type
stopped so the extended bits won't be used for the count. For
CTTZ_ZERO_UNDEF we don't care what happens if no bits are set in
the original type and we end up counting into the extended bits.
So we can just use ANY_EXTEND for both cases.
This matches what is done in type legalization for these operations.
We make no effort to force the upper bits to zero.
Differential Revision: https://reviews.llvm.org/D74111
Calls to ObjC's objc_msgSend function are done by bitcasting the function global
to the required function type signature. This patch looks through this bitcast
so that we can do a direct call with bl on arm64 instead of using an indirect blr.
Differential Revision: https://reviews.llvm.org/D74241
Add the isCandidateForCallSiteEntry predicate to MachineInstr to
determine whether a DWARF call site entry should be created for an
instruction.
For now, it's enough to have any call instruction that doesn't belong to
a blacklisted set of opcodes. For these opcodes, a call site entry isn't
meaningful.
Differential Revision: https://reviews.llvm.org/D74159
Allows more flexible use of buildMerge in places where
use operands are available as SrcOp since it does not
require explicit conversion to Register.
Simplify code with new buildMerge.
Differential Revision: https://reviews.llvm.org/D74223
This is a one off special case, since actually implementing full inline asm
support will be much more involved. This lets us compile a lot more code as a
common simple case.
Differential Revision: https://reviews.llvm.org/D74201
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
The type passed to lower was invalid, so I'm not sure how this was
even working before. The source and destination type also do not have
to match, so make sure to use the right ones.
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
Summary:
This patch reorders the emission of debug_str section, so that
string can come after macros.
This is necessary for macro forms like DW_MACRO_define_strp,
which emits macro as a string in debug_str section.
"linked-to section" is used by the ELF spec. By analogy, "linked-to
symbol" is a good name for the signature symbol. The word "linked-to"
implies a directed edge and makes it clear its relation with "sh_link",
while one can argue that "associated" means an undirected edge.
Also, combine tests and add precise SMLoc to improve diagnostics.
Reviewed By: eugenis, grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D74082
This reverts commit ed29dbaafa49bb8c9039a35f768244c394411fea.
I'm backing out D68945, which as the discussion for D73526 shows, doesn't
seem to handle the -O0 path through the codegen backend correctly. I'll
reland the patch when a fix is worked out, apologies for all the churn.
The two parent commits are part of this revert too.
Conflicts:
llvm/lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp
llvm/test/DebugInfo/X86/dbg-addr-dse.ll
SelectionDAGBuilder conflict is due to a nearby change in e39e2b4a79c6
that's technically unrelated. dbg-addr-dse.ll conflicted because
41206b61e30c (legitimately) changes the order of two lines.
There are further modifications to dbg-value-func-arg.ll: it landed after
the patch being reverted, and I've converted indirection to be represented
by the isIndirect field rather than DW_OP_deref.
This reverts commit 3137fe4d23eeb8df08c03e9111465325eeafe08e.
I'm backing out D68945, which this patch is a follow up for. It'll be
re-landed when D68945 is fixed.
The changes to dbg-value-func-arg.ll occur because our handling of certain
kinds of location now mixes up indirection that happens at different points
in a DIExpression. While this is a regression, it's a return to the prior
behaviour while a better patch is sought.
This reverts commit 2d3174c4df6b5f4131346828d0a31675d80d6e2b.
The overall solution for this problem is reverting D68945, which wasn't
handling the -O0 path through the codegen backend correctly. See:
discussion in D73526.
To find the instruction in the block for a given ID, first a count and then a
lookup was performed in the map, which is almost the same thing, thus doing
double the work.
Differential Revision: https://reviews.llvm.org/D73866
Summary:
ARM Type Promotion pass does not clear
the container that defines if one variable
was visited or not, missing optimization
opportunities by luck when two llvm:Values
from different functions are allocated at
the same memory address.
Also fixes a comment and uses existing
method to pop and obtain last element
of the worklist.
Reviewers: samparker
Reviewed By: samparker
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73970
This is a compile-time optimization for PHIElimination (splitting of critical
edges), which was reported at https://bugs.llvm.org/show_bug.cgi?id=44249. As
discussed there, the way to remedy the slowdowns with huge functions is to
pre-compute the live-in registers for each MBB in an efficient way in
PHIElimination.cpp and then pass that information along to
LiveVariabless::addNewBlock().
In all the huge test programs where this slowdown has been noticable, it has
dissapeared entirely with this patch.
Review: Björn Pettersson, Quentin Colombet.
Differential Revision: https://reviews.llvm.org/D73152
The legalizer produces a lot of these, and they make reading legalized
MIR annoying. For some reason, this does seem to sometimes introduce
copies of implicit def, which is dumb.
contractCrossBankCopyIntoStore() finds the instruction defines the
source register and uses its output to replace the register. There are,
however, instructions that have multiple outputs, e.g. G_UNMERGE_VALUES.
Current implementation hardcodes to operand 0 and has no way of knowing
which output should be used.
This change adds another function to directly return the register that
is the source of the register and use that for folding.
This fixes https://bugs.llvm.org/show_bug.cgi?id=44783
Differential Revision: https://reviews.llvm.org/D74005
We currently only handle mem instructions with a single define.
Avoid the call site parameter debug info when we find the case with
multiple defs, rather than throwing an assert.
Differential Revision: https://reviews.llvm.org/D73954
Summary:
This reverts commit 3ef169e586f4d14efe690c23c878d5aa92a80eb5. The
purpose of this commit was to allow stack machines to perform
instruction selection for instructions with variadic defs. However,
MachineInstrs fundamentally cannot support variadic defs right now, so
this change does not turn out to be useful.
Depends on D73927.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73928
Originally committed in: 1ced28cbe75ff81f35ac2c71e941041eb3afcd00
Reverted in: f75301d16d444d8cb6810d679290df744bc79ec7
(reverted due to tests failing on non-linux/x86 targets, tests have since been
generalized and specialized... since Split DWARF isn't supported on non-elf
targets anyway and we have no way to run on "whatever elf target is available"
so they fail on MacOS without an explicit target triple)
This code was incorrectly emitting extra bytes into arbitrary parts of
the object file when it was meant to be hashing them to compute the DWO
ID.
Follow-up patch(es) will refactor this API somewhat to make such bugs
harder to introduce, hopefully.
This extends the RemarkStreamer to allow for other emitters (e.g.
frontends, SIL, etc.) to emit remarks through a common interface.
See changes in llvm/docs/Remarks.rst for motivation and design choices.
Differential Revision: https://reviews.llvm.org/D73676
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
shouldOptimizeForSize is showing up in a profile, spending around 10%
of the pass time in one function. This should probably not be so slow,
but the much cheaper attribute check should be done first anyway.
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
and follow-ups.
This reverts commit 1ced28cbe75ff81f35ac2c71e941041eb3afcd00.
This reverts commit 4f281f047457ce3f1870a93253476222314f420b.
This reverts commit 552a8fe12bd1822f48dda2e9e8728a179f82d356.
The test fails on non-Linux.
This patch reverts part of r362750 / D62650, which stopped
LiveDebugVariables from trimming leading variable location ranges down
to only covering those instructions that are in scope. I've observed some
circumstances where the number of DBG_VALUEs in a function can be
amplified in an un-necessary way, to cover more instructions that are
out of scope, leading to very slow compile times. Trimming the range
of instructions that the variables cover solves the slow compile times.
The specific problem that r362750 tries to fix is addressed by the
assignment to RStart that I've added. Any variable location that begins
at the first instruction of a block will now be considered to begin at the
start of the block. While these sound the same, the have different
SlotIndexes, and the register allocator may shoehorn additional
instructions in between the two. The test added in the past
(wrong_debug_loc_after_regalloc.ll) still works with this modification.
live-debug-variables.ll has a range trimmed to not cover the prologue of
the function, while dbg-addr-dse.ll has a DBG_VALUE sink past one
instruction with no DebugLoc, which is expected behaviour.
Differential Revision: https://reviews.llvm.org/D73691
Ensure that OptLevelChanger::SavedFastISel is initialized in the constructor.
This should be NFC - as the equivalent 'same opt level' early-out is used in the destructor as well, so SavedFastISel is only actually referenced in the general case.
Differential Revision: https://reviews.llvm.org/D73875
Under MVE, we do not have any lowering for fminimum, which a
vector_reduce_fmin without NoNan will be expanded into. As with the
other recent patches, force this to expand in the pre-isel pass. Note
that Neon lowering would be OK because the scalar fminimum uses the
vector VMIN instruction, but is probably better to just rely on the
scalar operations, which is what is done here.
Also fixes what appears to be the reversal of INF vs -INF in the
vector_reduce_fmin widening code.
This code was incorrectly emitting extra bytes into arbitrary parts of
the object file when it was meant to be hashing them to compute the DWO
ID.
Follow-up patch(es) will refactor this API somewhat to make such bugs
harder to introduce, hopefully.
Start using a new strategy with a combination of merge and unmerges.
This allows scalarizing before lowering, which in cases like
<2 x s128> avoids producing giant illegal shifts.
RegAllocGreedy uses a fairly compile time intensive splitting heuristic
called region splitting. This heuristic was disabled via another heuristic
when it is likely that it won't be worth the compile time. The only way
to control this other heuristic was via a command line option (huge-size-for-split).
This commit gives more control on this heuristic by making it overridable
by the target using a target hook in TargetRegisterInfo called
shouldRegionSplitForVirtReg.
The default implementation of this hook keeps the heuristic as it was
before this patch.
