VOPD is a new encoding for dual-issue instructions for use in wave32.
This patch includes MC layer support only.
A VOPD instruction is constituted of an X component (for which there are
13 possible opcodes) and a Y component (for which there are the 13 X
opcodes plus 3 more). Most of the complexity in defining and parsing
a VOPD operation arises from the possible different total numbers of
operands and deferred parsing of certain operands depending on the
constituent X and Y opcodes.
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D128218
sources to SALU and VALU instructions.
Contributors:
Baptiste Saleil <baptiste.saleil@amd.com>
Patch 20/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126989
Reviewed By: rampitec, foad, #amdgpu
Differential Revision: https://reviews.llvm.org/D127143
Supports encoding existing instrutions on gfx11 and MC support for the new VOPC
dpp instructions.
Patch 19/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126978
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126989
Includes dpp versions of VOP3P instructions.
Patch 18/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126917
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126978
The reverted dependent commit is now relanded, so reland this.
Includes dpp instructions and vop1/vop2 promoted to vop3
Patch 17/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126483
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126917
There was an issue with encoding wide (>64 bit) instructions on
BigEndian hosts, which is fixed in D127195. Therefore reland this.
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Differential Revision: https://reviews.llvm.org/D126483
Includes dpp instructions and vop1/vop2 promoted to vop3
Patch 17/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126483
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126917
gfx11 adds the ability to use dpp modifiers on vop3 instructions.
This patch adds machine code layer support for that. The MCCodeEmitter
is changed to use APInt instead of uint64_t to support these wider
instructions.
Patch 16/N for upstreaming of AMDGPU gfx11 architecture
Depends on D126475
Reviewed By: rampitec, #amdgpu
Differential Revision: https://reviews.llvm.org/D126483
This patch includes MC layer support for VOP3 encoded instructions and generic VOP support
classes.
Some VOP1 and VOP2 instructions which share an encoding with gfx10 and are using
the AssemblerPredicate = isGFX10Plus are also enabled. That predicate
will be changed to isGFX10Only in a later patch.
Patch 15/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D126468
Reviewed By: dp
Differential Revision: https://reviews.llvm.org/D126475
A new instruction encoding. Some of these instructions were previously VOP3
encoded.
Contributors:
Carl Ritson <carl.ritson@amd.com>
Patch 11/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125824
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D125989
We always had global and scratch loads to LDS in the gfx9,
but did not handle it. These were available via the 'lds'
encoding bit. In gfx940 this bit was reused as 'svs' which
resulted in new '_lds' opcodes effectively pushing this
bit into the opcode, but functionally it is the same. These
instructions are also available on gfx10.
Differential Revision: https://reviews.llvm.org/D125126
MC layer support for SOP(scalar alu operations) including encoding
support for s_delay_alu and s_sendmsg_rtn.
Contributors:
Jay Foad <jay.foad@amd.com>
Patch 7/N for upstreaming of AMDGPU gfx11 architecture.
Depends on D125319
Reviewed By: #amdgpu, arsenm
Differential Revision: https://reviews.llvm.org/D125498
Includes MachineCode layer support and tests, and MIR tests not requiring
CodeGen pass changes.
Includes a small change in SMInstructions.td to correct encoded bits.
Contributors:
Petar Avramovic <Petar.Avramovic@amd.com>
Dmitry Preobrazhensky <dmitry.preobrazhensky@amd.com>
Depends on D125316
Patch 6/N for upstreaming of AMDGPU gfx11 architecture.
Reviewed By: dp, Petar.Avramovic
Differential Revision: https://reviews.llvm.org/D125319
NFC. Switch from calculations based on dwords to bits, to be more
flexible.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D121730
The original design of custom operands support assumed that most GPUs
have the same or very similar operand names end encodings. This is
no longer the case. As a result the support code becomes over-complicated
and difficult to maintain.
This change implements a different design with the following benefits:
- support of aliases;
- support of operands with overlapped encodings;
- identification of defined but unsupported operands.
Differential Revision: https://reviews.llvm.org/D121696
The namespaces of HWREGs is now overlapping with gfx10. Thus the
patch is longer than necessary to just support new names. It also
need to handle proper error messages, i.e. to issue a "specified
hardware register is not supported on this GPU" message.
This may need a major refactoring in the future.
Differential Revision: https://reviews.llvm.org/D121418
gfx90a allows the number of ACC registers (AGPRs) to be set
independently to the VGPR registers. For both HSA and PAL metadata, we
now include an "agpr_count" key to report the number of AGPRs set for
supported devices (gfx90a, gfx908, as determined by hasMAIInsts()).
This is collected from SIProgramInfo.NumAccVGPR for both HSA and PAL.
The AsmParser also now recognizes ".kernel.agpr_count" for supported
devices.
Differential Revision: https://reviews.llvm.org/D116140
Enabled HW_REG_HW_ID as an alias for HW_REG_HW_ID1. This is required for compatibility with existing code.
Differential Revision: https://reviews.llvm.org/D119939
Separate MCRegisterInfo::regsOverlap out from
TargetRegisterInfo::regsOverlap. This is useful in the AMDGPU AsmParser
where we only have access to MCRegisterInfo.
Differential Revision: https://reviews.llvm.org/D119533
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/MC/MCParser/MCAsmParser.h no longer includes llvm/MC/MCParser/MCAsmLexer.h
Preprocessed lines to build llvm on my setup:
after: 1068185081
before: 1068324320
So no compile time benefit to expect, but we still get the looser coupling
between files which is great.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119359
There's a few relevant forward declarations in there that may require downstream
adding explicit includes:
llvm/MC/MCContext.h no longer includes llvm/BinaryFormat/ELF.h, llvm/MC/MCSubtargetInfo.h, llvm/MC/MCTargetOptions.h
llvm/MC/MCObjectStreamer.h no longer include llvm/MC/MCAssembler.h
llvm/MC/MCAssembler.h no longer includes llvm/MC/MCFixup.h, llvm/MC/MCFragment.h
Counting preprocessed lines required to rebuild llvm-project on my setup:
before: 1052436830
after: 1049293745
Which is significant and backs up the change in addition to the usual benefits of
decreasing coupling between headers and compilation units.
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119244
Summary:
Add code object v5 support (deafult is still v4)
Generate metadata for implicit kernel args for the new ABI
Set the metadata version to be 1.2
Reviewers:
t-tye, b-sumner, arsenm, and bcahoon
Fixes:
SWDEV-307188, SWDEV-307189
Differential Revision:
https://reviews.llvm.org/D118272
