The original behavior was to always emit the offsets to each call site in the
call site table as uleb128 values, however on some architectures (eg RISCV)
these uleb128 offsets into the code cannot always be resolved until link time
(because relaxation will invalidate any calculated offsets), and there are no
appropriate relocations for uleb128 values. As a consequence it needs to be
possible to specify an alternative.
This also switches RISCV to use DW_EH_PE_udata4 for call side encodings in
.gcc_except_table
Differential Revision: https://reviews.llvm.org/D63415
Patch by Edward Jones.
llvm-svn: 366329
This patch sets correct encodings for DWARF exception handling for RISC-V
(other than call site encoding, which must be udata4 rather than uleb128 and
is handled by D63415).
This has the same intend as D63409, except this version matches GCC/binutils
behaviour which uses the same encodings regardless of PIC/non-PIC and
medlow/medany code model.
llvm-svn: 366327
Summary:
Pointed out in a comment for D49754, register spilling will currently
spill SPE registers at almost any offset. However, the instructions
`evstdd` and `evldd` require a) 8-byte alignment, and b) a limit of 256
(unsigned) bytes from the base register, as the offset must fix into a
5-bit offset, which ranges from 0-31 (indexed in double-words).
The update to the register spill test is taken partially from the test
case shown in D49754.
Additionally, pointed out by Kei Thomsen, globals will currently use
evldd/evstdd, though the offset isn't known at compile time, so may
exceed the 8-bit (unsigned) offset permitted. This fixes that as well,
by forcing it to always use evlddx/evstddx when accessing globals.
Part of the patch contributed by Kei Thomsen.
Reviewers: nemanjai, hfinkel, joerg
Subscribers: kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54409
llvm-svn: 366318
Add narrowScalar to half of original size for G_ICMP.
ClampScalar G_ICMP's operands 2 and 3 to to s32.
Select G_ICMP for pointers for MIPS32. Pointer compare is same
as for integers, it is enough to declare them as legal type.
Differential Revision: https://reviews.llvm.org/D64856
llvm-svn: 366317
As well as other LLVM targets we do not handle "offsettable"
memory addresses in any special way. In other words, the "o" constraint
is an exact equivalent of the "m" one. But some existing code require
the "o" constraint support.
This fixes PR42589.
Differential Revision: https://reviews.llvm.org/D64792
llvm-svn: 366299
Summary:
Currently, on Emscripten, dynamic linking is not supported with threads.
This means that if thread-local storage is used, it must be used in a
statically-linked executable. Hence, local-exec is the only possible model.
This diff compiles all TLS variables to use local-exec on Emscripten as a
temporary measure until dynamic linking is supported with threads.
The goal for this is to allow C++ types with constructors to be thread-local.
Currently, when `clang` compiles a `thread_local` variable with a constructor,
it generates `__tls_guard` variable:
@__tls_guard = internal thread_local global i8 0, align 1
As no TLS model is specified, this is treated as general-dynamic, which we do
not support (and cannot support without implementing dynamic linking support
with threads in Emscripten). As a result, any C++ constructor in `thread_local`
variables would not compile.
By compiling all `thread_local` as local-exec, `__tls_guard` will compile and
we can support C++ constructors with TLS without implementing dynamic linking
with threads.
Depends on D64537
Reviewers: tlively, aheejin, sbc100
Reviewed By: aheejin
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64776
llvm-svn: 366275
Summary:
Thread local variables are placed inside a `.tdata` segment. Their symbols are
offsets from the start of the segment. The address of a thread local variable
is computed as `__tls_base` + the offset from the start of the segment.
`.tdata` segment is a passive segment and `memory.init` is used once per thread
to initialize the thread local storage.
`__tls_base` is a wasm global. Since each thread has its own wasm instance,
it is effectively thread local. Currently, `__tls_base` must be initialized
at thread startup, and so cannot be used with dynamic libraries.
`__tls_base` is to be initialized with a new linker-synthesized function,
`__wasm_init_tls`, which takes as an argument a block of memory to use as the
storage for thread locals. It then initializes the block of memory and sets
`__tls_base`. As `__wasm_init_tls` will handle the memory initialization,
the memory does not have to be zeroed.
To help allocating memory for thread-local storage, a new compiler intrinsic
is introduced: `__builtin_wasm_tls_size()`. This instrinsic function returns
the size of the thread-local storage for the current function.
The expected usage is to run something like the following upon thread startup:
__wasm_init_tls(malloc(__builtin_wasm_tls_size()));
Reviewers: tlively, aheejin, kripken, sbc100
Subscribers: dschuff, jgravelle-google, hiraditya, sunfish, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64537
llvm-svn: 366272
This is part of what is requested by PR42023:
https://bugs.llvm.org/show_bug.cgi?id=42023
There's an extension needed for FP add, but exactly how we would specify
that using flags is not clear to me, so I left that as a TODO.
We're still missing patterns for partial reductions when the input vector
is 256-bit or 512-bit, but I think that's a failure of vector narrowing.
If we can reduce the widths, then this matching should work on those tests.
Differential Revision: https://reviews.llvm.org/D64760
llvm-svn: 366268
Summary:
This is exposed by our internal testing.
The reduced testcase will assert with "Impossible reg-to-reg copy"
We can't use COPY to do 32-bit to 64-bit conversion.
Reviewers: kbarton, hfinkel, nemanjai
Reviewed By: hfinkel
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64499
llvm-svn: 366255
I think this manages to not break the DAG handling with the divergent
predicates because the stadalone divergent patterns end up with a
higher priority than the pattern on the instruction definition.
The 16-bit versions don't work yet.
llvm-svn: 366254
When it is AReg_1024 this results in unnecessary copying into
AGPRs of a 32 element vectors even though they are not intended
for an mfma instruction.
Differential Revision: https://reviews.llvm.org/D64815
llvm-svn: 366252
Now that the patterns use the new PatFrag address space support, the
only blocker to importing most load patterns is the addressing mode
complex patterns.
llvm-svn: 366237
Summary:
Extend the atomic optimizer to handle signed and unsigned max and min
operations, as well as add and subtract.
Reviewers: arsenm, sheredom, critson, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64328
llvm-svn: 366235
Reimplement scheduling constraints for strict FP instructions in
ScheduleDAGInstrs::buildSchedGraph to allow for more relaxed
scheduling. Specifially, allow one strict FP instruction to
be scheduled across another, as long as it is not moved across
any global barrier.
Differential Revision: https://reviews.llvm.org/D64412
Reviewed By: cameron.mcinally
llvm-svn: 366222
Summary:
As per title. DAGCombiner only mathes the special case where b = 0, this patches extends the pattern to match any value of b.
Depends on D57302
Reviewers: hfinkel, RKSimon, craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59208
llvm-svn: 366214
Apparently the check for legal instructions during instruction
select does not happen without an asserts build, so these would
successfully select in release, and fail in debug.
Make s16 and/or/xor legal. These can just be selected directly
to the 32-bit operation, as is already done in SelectionDAG, so just
make them legal.
llvm-svn: 366210
The jcvt intrinsic defined in ACLE [1] is available when ARM_FEATURE_JCVT is defined.
This change introduces the AArch64 intrinsic, wires it up to the instruction and a new clang builtin function.
The __ARM_FEATURE_JCVT macro is now defined when an Armv8.3-A or higher target is used.
I've implemented the target detection logic in Clang so that this feature is enabled for architectures from armv8.3-a onwards (so -march=armv8.4-a also enables this, for example).
make check-all didn't show any new failures.
[1] https://developer.arm.com/docs/101028/latest/data-processing-intrinsics
Differential Revision: https://reviews.llvm.org/D64495
llvm-svn: 366197
The canonical GNU form of JALR resembles a load/store instruction rather
than placing the immediate offset as a separate argument, so match this
behaviour. Also add parser-only aliases for the three-operand form, and
add other shorter aliases also emitted by GNU tools.
Differential Revision: https://reviews.llvm.org/D55277
Patch by James Clarke.
llvm-svn: 366179
We mostly avoid sub with immediate but there are a couple cases that can create them. One is the add 128, %rax -> sub -128, %rax trick in isel. The other is when a SUB immediate gets created for a compare where both the flags and the subtract value is used. If we are unable to linearize the SelectionDAG to satisfy the flag user and the sub result user from the same instruction, we will clone the sub immediate for the two uses. The one that produces flags will eventually become a compare. The other will have its flag output dead, and could then be considered for LEA creation.
I added additional test cases to add.ll to show the the sub -128 trick gets converted to LEA and a case where we don't need to convert it.
This showed up in the current codegen for PR42571.
Differential Revision: https://reviews.llvm.org/D64574
llvm-svn: 366151
Summary:
This adds missing utility methods and copy instruction handling for
`exnref` type and also adds tests.
`tee` instruction tests are missing because `isTee` is currently only
used in ExplicitLocals pass and testing that pass in mir requires
serialization of stackified registers in mir files, which is a bit
nontrivial because `MachineFunctionInfo` only has info of vreg numbers
(which are large integers) but not the mir's register numbers. But this
change is quite trivial anyway.
Reviewers: tlively
Subscribers: dschuff, sbc100, jgravelle-google, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64705
llvm-svn: 366149
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
Summary:
This deletes the ll templates from the functions because they don't need
them (mir files need ll templates only when they have function calls or
BB names that are not numbers).
This also renames the filename to `reg-copy.mir`, because I'm planning
to add some more `reg-*.mir` soon.
Reviewers: tlively
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64704
llvm-svn: 366140
Summary:
Enable hoisting and merging m0 defs that are initialized with the same
immediate value. Fixes bug where removed instructions are not considered
to interfere with other inits, and make sure to not hoist inits before block
prologues.
Reviewers: rampitec, arsenm
Reviewed By: rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64766
llvm-svn: 366135
If a 1-bit value is in a 32-bit VGPR, the scalar opcodes set SCC to
whether the result is 0. If the inputs are SCC, these can be copied to
a 32-bit SGPR to produce an SCC result.
llvm-svn: 366125
This is a hack until I come up with a better way of dealing with the
pseudo-register banks used for boolean values. If the use instruction
constrains the register, the selector for the def instruction won't
see that the bank was VCC. A 1-bit SReg_32 is could ambiguously have
been SCCRegBank or VCCRegBank in wave32.
This is necessary to successfully select branches with and and/or/xor
condition.
llvm-svn: 366120
The extra test change is correct, although how it arrives there is a
bug that needs work. With wave32, the test for isVCC ambiguously
reports true for an SCC or VCC source. A new allocatable pseudo
register class for SCC may be necesssary.
llvm-svn: 366119
We need to make sure that we are sensibly dealing with vectors of types v2i64
and v2f64, even if most of the time we cannot generate native operations for
them. This mostly adds a lot of testing, plus fixes up a couple of the issues
found. And, or and xor can be legal for v2i64, and shifts combining needs a
slight fixup.
Differential Revision: https://reviews.llvm.org/D64316
llvm-svn: 366106
