An existing transformation replaces invoke instructions with a call to
the invoked function and a branch to the destination; when this happens,
we propagate the invoke's source location to the call but not to the
branch. This patch updates this behaviour to propagate to the branch as
well.
Found using https://github.com/llvm/llvm-project/pull/107279.
This is to fix a bug when a target only support conditional faulting
load, see test case hoist_store_without_cstore.
Split `-simplifycfg-hoist-loads-stores-with-cond-faulting` into
`-simplifycfg-hoist-loads-with-cond-faulting` and
`-simplifycfg-hoist-stores-with-cond-faulting` to control conditional
faulting load and store respectively.
These date back to when the non-intrinsic format of variable locations
was still being tested and was behind a compile-time flag, so not all
builds / bots would correctly run them. The solution at the time, to get
at least some test coverage, was to have tests opt-in to non-intrinsic
debug-info if it was built into LLVM.
Nowadays, non-intrinsic format is the default and has been on for more
than a year, there's no need for this flag to exist.
(I've downgraded the flag from "try" to explicitly requesting
non-intrinsic format in some places, so that we can deal with tests that
are explicitly about non-intrinsic format in their own commit).
The llvm.fake.use intrinsic is used to prevent certain values from being
optimized out for the benefit of debug info; it is not, however, a debug
or pseudo instruction itself and necessarily must not be treated as one,
since its purpose is to act like a normal instruction. In the original
commit that added them, the IR intrinsic however was treated as one in
`getPrevNonDebugInstruction` (but _not_ in `getNextNonDebugInstruction`,
or in the MIR equivalents). This patch correctly treats it as a
non-debug instruction.
As discussed in #94468, this causes switch lookup table entries which
are unreachable to be poison instead of filling them with a value from
one of the reachable cases.
---------
Co-authored-by: DianQK <dianqk@dianqk.net>
Allow a duplicate basic block with multiple predecessors to the
jump table to be simplified, by considering that the same basic
block may appear in more switch cases.
This is a follow up of #96878 to support hoisting load/store from BBs
have the same predecessor, if load/store are the only instructions and
the branch is unpredictable, e.g.:
```
void test (int a, int *c, int *d) {
if (a)
*c = a;
else
*d = a;
}
```
This is supposed to test multiplication of the linear multiplifier
with the largest value it can be multiplied with. However, if
we truncate TableSize-1 here, it might not actually be the largest
value. I think in practice this still works out, because in cases
where we'd truncate the value here we'd also fail the NonMonotonic
check. But to match the intent of the code, we should treat the
truncating case as overflowing.
If we can sink the a load/store, but not the gep producing its pointer
operand, don't sink the load/store either. This may prevent the gep from
being folded into an addressing mode, and may also negatively affect
further analysis.
Fixes https://github.com/llvm/llvm-project/issues/96838.
This is simplifycfg part of
https://github.com/llvm/llvm-project/pull/95515
In this PR, we support hoisting load/store with conditional faulting in
`SimplifyCFGOpt::speculativelyExecuteBB` to eliminate conditional
branches.
This is for cases like
```
void test (int a, int *b) {
if (a)
*b = a;
}
```
In the following patches, we will support the hoist in
`SimplifyCFGOpt::hoistCommonCodeFromSuccessors`.
That is for cases like
```
void test (int a, int *c, int *d) {
if (a)
*c = a;
else
*d = a;
}
```
This is a followup to https://github.com/llvm/llvm-project/pull/104579
to remove the limitation on sinking loads/stores of allocas entirely,
even if this would introduce a phi node.
Nowadays, SROA supports speculating load/store over select/phi.
Additionally, SimplifyCFG with sinking only runs at the end of the
function simplification pipeline, after SROA. I checked that the two
tests modified here still successfully SROA after the SimplifyCFG
transform.
We should, however, keep the limitation on lifetime intrinsics. SROA
does not have speculation support for these, and I've also found that
the way these are handled in the backend is very problematic
(https://github.com/llvm/llvm-project/issues/104776), so I think we
should leave them alone.
SimplifyCFG sinking currently does not sink loads/stores of allocas,
because historically SROA was unable to handle the resulting IR. Since
then, SROA both learned to speculate loads/stores over selects and phis,
*and* SimplifyCFG sinking has been deferred to the end of the function
simplification pipeline, which means that SROA happens before it.
As such, I believe that this workaround should no longer be necessary.
Given how sensitive SimplifyCFG sinking seems to be, this patch takes a
very conservative step towards removing this, by allowing sinking if we
don't actually need to form a phi over the pointer argument.
This fixes https://github.com/llvm/llvm-project/issues/104567, where
sinking a store to an escaped alloca allows converting a switch into
arithmetic.
Sinking currently only supports instructions that have zero or one uses.
Extend this to handle instructions with any number of uses, as long as
all uses are consistent (i.e. the "same" for all sinking candidates).
After #94462 this is basically just a matter of looping over all uses
instead of checking the first one only.
This patch makes the final major change of the RemoveDIs project, changing the
default IR output from debug intrinsics to debug records. This is expected to
break a large number of tests: every single one that tests for uses or
declarations of debug intrinsics and does not explicitly disable writing
records.
If this patch has broken your downstream tests (or upstream tests on a
configuration I wasn't able to run):
1. If you need to immediately unblock a build, pass
`--write-experimental-debuginfo=false` to LLVM's option processing for all
failing tests (remember to use `-mllvm` for clang/flang to forward arguments to
LLVM).
2. For most test failures, the changes are trivial and mechanical, enough that
they can be done by script; see the migration guide for a guide on how to do
this: https://llvm.org/docs/RemoveDIsDebugInfo.html#test-updates
3. If any tests fail for reasons other than FileCheck check lines that need
updating, such as assertion failures, that is most likely a real bug with this
patch and should be reported as such.
For more information, see the recent PSA:
https://discourse.llvm.org/t/psa-ir-output-changing-from-debug-intrinsics-to-debug-records/79578
When sinking instructions, we have to make sure that the uses of that
instruction are consistent: If used in a phi node in the sink target,
then the phi operands have to match the sink candidates. This allows the
phi to be removed when the instruction is sunk. This case is already
handled accurately.
However, what the current code doesn't handle are uses in the same
block. These are just unconditionally accepted, even though this needs
the same consistency check for the phi node that sinking the using
instruction would introduce.
Instead, the code has another check when actually performing the
sinking, which repeats the phi check (just at a later time, where all
the later instructions have already been sunk and any new phis
introduced).
This is problematic, because it messes up the profitability heuristic.
The code will think that certain instructions will get sunk, but they
actually won't. This may result in more phi nodes being created than is
considered profitable. See the changed test for a case where we no
longer do this after this patch.
The new approach makes sure that the uses are consistent during the
initial legality check. This is based on PhiOperands, which we already
collect.
The primary motivation for this is to generalize sinking to support more
than one use, and doing that generalization is hard with the current
split checking approach.
When transforming a switch with holes into a lookup table, we currently
use a mask to check if the current index is handled by the switch or if
it is a hole. If it is a hole, we skip loading from the lookup table.
Normally, if the switch's default case is unreachable this has no
impact, as the mask test gets optimized away by subsequent passes.
However, if the switch is large enough that the number of lookup table
entries exceeds the target's register width, we won't be able to fit all
the cases into a mask and the switch won't get transformed into a lookup
table. If we know that the switch's default case is unreachable, we know
that the mask is unnecessary and can skip constructing it entirely,
which allows us to transform the switch into a lookup table.
[Example](https://godbolt.org/z/7x7qfx8M1)
In the future, it might be interesting to consider allowing lookup table
masks to be more than one register large (e.g. using a constant array of
bit flags, similar to `std::bitset`).
Regenerate these with --check-globals. The manual global CHECKS
get dropped during regeneration otherwise.
Annoyingly UTC insists on putting the globals directly before the
first function, so the first comment is a bit out of place now.
Make BasicTTIImplBase's `isTypeLegal` check handle unknown types.
Current behavior is aborting.
Motivated by a use case in SimplifyCFG, where `isTypeLegal` is called on
a struct type and dies, when it could be treated as illegal and skipped.
In general it could make sense for unknown types to be allowed, and by
default just considered not legal, but the behavior can of course be
overriden.
In most cases, SETCC lowering will be able to simplify/commute the comparison by adjusting the constant.
TODO: We still need to adjust ExtraCost based on CostKind
Fixes#80122
Follow up to #79476 - that patch added a call to hoistLockstepIdenticalDPValues
which hoists identical DPValues in lockstep, matching dbg intrinsic hoisting
behaviour. The code deleted in this patch, which unconditionally hoists
DPValues, should have been deleted in that patch.
Update test with --try-experimental-debuginfo-iterators to check the behaviour.
Follow up to #79476 - that change introduces a call to
hoistLockstepIdenticalDPValues.
Hoist DPValues attached to each instruction being considered for hoisting if
they are identical in lock-step. This includes the final instructions which
are considered but not hoisted, because the corresponding dbg.values would
appear before those instruction and thus hoisted if identical.
Identical debug records hoisted:
llvm/test/Transforms/SimplifyCFG/hoist-dbgvalue.ll
Non-identical debug records not hoisted:
llvm/test/Transforms/SimplifyCFG/X86/pr39187-g.ll
Debug records attached to first not-hoisted instructions are hoisted:
llvm/test/Transforms/SimplifyCFG/hoist-dbgvalue-inlined.ll
Debugify is extremely useful as a testing and debugging tool, and a good
number of LLVM-IR transform tests use it. We need it to support "new"
non-instruction debug-info to get test coverage, but it's not important
enough to completely convert right now (and it'd be a large
undertaking). Thus: convert to/from dbg.value/DPValue mode on entry and
exit of the pass, which gives us the functionality without any further
work. The cost is compile-time, but again this is only happening during
tests.
Tested by: the large set of debugify tests enabled here. Note the
InstCombine test (cast-mul-select.ll) that hasn't been fully enabled:
this is because there's a debug-info sinking piece of code there that
hasn't been instrumented.
Remove the following warning.
```
WARNING: Change IR value name 'tmp4' or use --prefix-filecheck-ir-name to prevent possible conflict with scripted FileCheck name.
```
This reverts commit 20f0c68fd83a0147a8ec1722bd2e848180610288.
https://reviews.llvm.org/D153966#4464594 reports an optimization
regression in Rust.
Additionally this change has caused an unexpected 0.3% compile-time
regression.
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
Don't merge invokes if this replaces constant operands with phis
in a place where this is not legal.
This also disallows converting operand bundles from constant to
non-constant, in line with the restriction we use in other
transforms.
Fixes https://github.com/llvm/llvm-project/issues/61265.
Differential Revision: https://reviews.llvm.org/D146723
SimplifyCFG currently drops !nontemporal metadata when sinking
common instructions. With this change, SimplifyCFG and similar
transforms will preserve !nontemporal metadata as long as it is
set on both original instructions.
Differential Revision: https://reviews.llvm.org/D144298
