Instead of popping them and then immediately throwing them away, we can
just filter out globals and items in different scopes before adding them
to WorkList. Shouldn't change anything but keep the queue smaller.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D113864
It was being used occasionally already, and using it on the constructor
and getDbgEntityID has obvious type safety benefits.
Also use llvm_unreachable in the switch as usual, but since only these
two values are used in constructor calls I think it's still NFC.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D113862
https://reviews.llvm.org/D71677 copied a bunch of code from
EmitGCCInlineAsmStr() to EmitMSInlineAsmStr() but made a few small
(likely unintentional) changes. This makes these pieces look the same.
No behavior change.
(Why are these functions two copies? No great reason as far as I can tell.
https://reviews.llvm.org/rG1778831a3d1d24ab6545635f63da4d9c5f8f0ac7 did the
split; we might want to undo them at some point. But PR23933 suggests
that a bigger change is planned for this file in the future, so keeping
this incremental for now.)
Differential Revision: https://reviews.llvm.org/D113924
There's really no reason why anyone should use these special names in a variant.
I noticed this while reading the code: all other writes to OS are guarded by
this conditional, and the behavior with the check seems more correct, so
let's add the check.
Differential Revision: https://reviews.llvm.org/D113909
In a LTO build, the `end_sequence` in debug_line table for each compile unit (CU) points the end of text section which merged all CUs. The `end_sequence` needs to point to the end of each CU's range. This bug often causes invalid `debug_line` table in the final `.dSYM` binary for MachO after running `dsymutil` which tries to compensate an out-of-range address of `end_sequence`.
The fix is to sync the line table termination with the range operations that are already maintained in DwarfDebug. When CU or section changes, or nodebug functions appear or module is finished, the prior pending line table is terminated using the last range label. In the MC path where no range is tracked, the old logic is conservatively used to end the line table using the section end symbol.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D108261
For global variables and common blocks there is no way to create entities
through getOrCreateContextDIE(), so no need to obtain the context first.
Differential Revision: https://reviews.llvm.org/D113651
When emitting a reloc for the Wasm global __stack_pointer, it was inadvertedly added to the symbols used for generating aranges, which caused some aranges to use it as the end symbol in a symbol diff, which caused a reloc for it to be emitted, which then caused an assert in `wasm64` since we have no 64-bit relocs for Wasm globals.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=52376
Differential Revision: https://reviews.llvm.org/D113438
As discussed in:
* https://reviews.llvm.org/D94166
* https://lists.llvm.org/pipermail/llvm-dev/2020-September/145031.html
The GlobalIndirectSymbol class lost most of its meaning in
https://reviews.llvm.org/D109792, which disambiguated getBaseObject
(now getAliaseeObject) between GlobalIFunc and everything else.
In addition, as long as GlobalIFunc is not a GlobalObject and
getAliaseeObject returns GlobalObjects, a GlobalAlias whose aliasee
is a GlobalIFunc cannot currently be modeled properly. Creating
aliases for GlobalIFuncs does happen in the wild (e.g. glibc). In addition,
calling getAliaseeObject on a GlobalIFunc will currently return nullptr,
which is undesirable because it should return the object itself for
non-aliases.
This patch refactors the GlobalIFunc class to inherit directly from
GlobalObject, and removes GlobalIndirectSymbol (while inlining the
relevant parts into GlobalAlias and GlobalIFunc). This allows for
calling getAliaseeObject() on a GlobalIFunc to return the GlobalIFunc
itself, making getAliaseeObject() more consistent and enabling
alias-to-ifunc to be properly modeled in the IR.
I exercised some judgement in the API clients of GlobalIndirectSymbol:
some were 'monomorphized' for GlobalAlias and GlobalIFunc, and
some remained shared (with the type adapted to become GlobalValue).
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D108872
When compiling for the RWPI relocation model the debug information is wrong:
* the debug location is described as { DW_OP_addr Var }
instead of { DW_OP_constNu Var DW_OP_bregX 0 DW_OP_plus }
* the relocation type is R_ARM_ABS32 instead of R_ARM_SBREL32
Differential Revision: https://reviews.llvm.org/D111404
After D80369, the retainedTypes in CU's should not have any subprograms
so we should not handle that case when emitting debug info.
Differential Revision: https://reviews.llvm.org/D111593
This makes Wasm EH work with dynamic linking. So far we were only able
to handle destructors, which do not use any tags or LSDA info.
1. This uses `TargetExternalSymbol` for `GCC_except_tableN` symbols,
which points to the address of per-function LSDA info. It is more
convenient to use than `MCSymbol` because it can take additional
target flags.
2. When lowering `wasm_lsda` intrinsic, if PIC is enabled, make the
symbol relative to `__memory_base` and generate the `add` node. If
PIC is disabled, continue to use the absolute address.
3. Make tag symbols (`__cpp_exception` and `__c_longjmp`) undefined in
the backend, because it is hard to make it work with dynamic
linking's loading order. Instead, we make all tag symbols undefined
in the LLVM backend and import it from JS.
4. Add support for undefined tags to the linker.
Companion patches:
- https://github.com/WebAssembly/binaryen/pull/4223
- https://github.com/emscripten-core/emscripten/pull/15266
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D111388
Per discussion in https://reviews.llvm.org/D111199,
the existing btf_tag attribute will be renamed to
btf_decl_tag. This patch mostly updated the Bitcode and
DebugInfo test cases with new attribute name.
Differential Revision: https://reviews.llvm.org/D111591
This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.
This allows us to ensure that Support doesn't have includes from MC/*.
Differential Revision: https://reviews.llvm.org/D111454
This change fixes a bug where the compiler generates a prologue_end
for line 0 locs. That is because line 0 is not associated with any
source location, so there should not be a prolgoue_end at a location
that doesn't correspond to a source location.
There were some LLVM tests that were explicitly checking for line 0
prologue_end's as well since I believe that to be incorrect, I had to
change those tests as well.
Patch by Shubham Rastogi!
Differential Revision: https://reviews.llvm.org/D110740
To better reflect the meaning of the now-disambiguated {GlobalValue,
GlobalAlias}::getBaseObject after breaking off GlobalIFunc::getResolverFunction
(D109792), the function is renamed to getAliaseeObject.
This reverts c7f16ab3e3f27d944db72908c9c1b1b7366f5515 / r109694 - which
suggested this was done to improve consistency with the gdb test suite.
Possible that at the time GCC did not canonicalize integer types, and so
matching types was important for cross-compiler validity, or that it was
only a case of over-constrained test cases that printed out/tested the
exact names of integer types.
In any case neither issue seems to exist today based on my limited
testing - both gdb and lldb canonicalize integer types (in a way that
happens to match Clang's preferred naming, incidentally) and so never
print the original text name produced in the DWARF by GCC or Clang.
This canonicalization appears to be in `integer_types_same_name_p` for
GDB and in `TypeSystemClang::GetBasicTypeEnumeration` for lldb.
(I tested this with one translation unit defining 3 variables - `long`,
`long (*)()`, and `int (*)()`, and another translation unit that had
main, and a function that took `long (*)()` as a parameter - then
compiled them with mismatched compilers (either GCC+Clang, or
Clang+(Clang with this patch applied)) and no matter the combination,
despite the debug info for one CU naming the type "long int" and the
other naming it "long", both debuggers printed out the name as "long"
and were able to correctly perform overload resolution and pass the
`long int (*)()` variable to the `long (*)()` function parameter)
Did find one hiccup, identified by the lldb test suite - that CodeView
was relying on these names to map them to builtin types in that format.
So added some handling for that in LLVM. (these could be split out into
separate patches, but seems small enough to not warrant it - will do
that if there ends up needing any reverti/revisiting)
Differential Revision: https://reviews.llvm.org/D110455
As described on D111049, we're trying to remove the <string> dependency from error handling and replace uses of report_fatal_error(const std::string&) with the Twine() variant which can be forward declared.
We can use the raw_string_ostream::str() method to perform the implicit flush() and return a reference to the std::string container that we can then wrap inside Twine().
The ARM backend was explicitly setting global binding on the personality
symbol. This was added without any comment in a7ec2dcefd954, which
introduced EHABI support (back in 2011). None of the other backends do
anything equivalent, as far as I can tell.
This causes problems when attempting to wrap the personality symbol.
Wrapped symbols are marked as weak inside LTO to inhibit IPO (see
https://reviews.llvm.org/D33621). When we wrap the personality symbol,
it initially gets weak binding, and then the ARM backend attempts to
change the binding to global, which causes an error in MC because of
attempting to change the binding of a symbol from non-global to global
(the error was added in https://reviews.llvm.org/D90108).
Simply drop the ARM backend's explicit global binding setting to fix
this. This matches all the other backends, and a large internal
application successfully linked and ran with this change, so it
shouldn't cause any problems. Test via LLD, since wrapping is required
to exhibit the issue.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D110609
This patch emits DW_TAG_namelist and DW_TAG_namelist_item for fortran
namelist variables. DICompositeType is extended to support this fortran
feature.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D108553
New field `elements` is added to '!DIImportedEntity', representing
list of aliased entities.
This is needed to dump optimized debugging information where all names
in a module are imported, but a few names are imported with overriding
aliases.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D109343
In preparation for passing the MCSubtargetInfo (STI) through to writeNops
so that it can use the STI in operation at the time, we need to record the
STI in operation when a MCAlignFragment may write nops as padding. The
STI is currently unused, a further patch will pass it through to
writeNops.
There are many places that can create an MCAlignFragment, in most cases
we can find out the STI in operation at the time. In a few places this
isn't possible as we are in initialisation or finalisation, or are
emitting constant pools. When possible I've tried to find the most
appropriate existing fragment to obtain the STI from, when none is
available use the per module STI.
For constant pools we don't actually need to use EmitCodeAlign as the
constant pools are data anyway so falling through into it via an
executable NOP is no better than falling through into data padding.
This is a prerequisite for D45962 which uses the STI to emit the
appropriate NOP for the STI. Which can differ per fragment.
Note that involves an interface change to InitSections. It is now
called initSections and requires a SubtargetInfo as a parameter.
Differential Revision: https://reviews.llvm.org/D45961
The temporary object was used as a workaround when the target parser may
change STI. D14346 made the MCSubtargetInfo argument to
createMCAsmParser const, so we no longer need the temporary object.
This add support for SjLj using Wasm exception handling instructions:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/exception-handling/Exceptions.md
This does not yet support the mixed use of EH and SjLj within a
function. It will be added in a follow-up CL.
This currently passes all SjLj Emscripten tests for wasm0/1/2/3/s,
except for the below:
- `test_longjmp_standalone`: Uses Node
- `test_dlfcn_longjmp`: Uses NodeRAWFS
- `test_longjmp_throw`: Mixes EH and SjLj
- `test_exceptions_longjmp1`: Mixes EH and SjLj
- `test_exceptions_longjmp2`: Mixes EH and SjLj
- `test_exceptions_longjmp3`: Mixes EH and SjLj
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D108960
A new LLVM specific TAG DW_TAG_LLVM_annotation is added.
The name is suggested by Paul Robinson ([1]).
Currently, this tag is used to output __attribute__((btf_tag("string")))
annotations in dwarf. The following is an example for a global
variable with two btf_tag attributes:
0x0000002a: DW_TAG_variable
DW_AT_name ("g1")
DW_AT_type (0x00000052 "int")
DW_AT_external (true)
DW_AT_decl_file ("/tmp/home/yhs/work/tests/llvm/btf_tag/t.c")
DW_AT_decl_line (8)
DW_AT_location (DW_OP_addr 0x0)
0x0000003f: DW_TAG_LLVM_annotation
DW_AT_name ("btf_tag")
DW_AT_const_value ("tag1")
0x00000048: DW_TAG_LLVM_annotation
DW_AT_name ("btf_tag")
DW_AT_const_value ("tag2")
0x00000051: NULL
In the future, DW_TAG_LLVM_annotation may encode other type
of non-string const value.
[1] https://lists.llvm.org/pipermail/llvm-dev/2021-June/151250.html
Differential Revision: https://reviews.llvm.org/D106621
Md5 hashing is expansive. Using a hash map to look up already computed GUID for dwarf names. Saw a 2% build time improvement on an internal large application.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D108722
This patch emits DW_TAG_namelist and DW_TAG_namelist_item for fortran
namelist variables. DICompositeType is extended to support this fortran
feature.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D108553
Issue Details:
The addresses for SEH tables for Windows are incorrect as 1 was unconditionally being added to all addresses. +1 is required for the SEH end address (as it is exclusive), but the SEH start addresses is inclusive and so should be used as-is.
In the IP2State tables, the addresses are +1 for AMD64 to handle the return address for a call being after the actual call instruction but are as-is for ARM and ARM64 as the `StateFromIp` function in the VC runtime automatically takes this into account and adjusts the address that is it looking up.
Fix Details:
* Split the `getLabel` function into two: `getLabel` (used for the SEH start address and ARM+ARM64 IP2State addresses) and `getLabelPlusOne` (for the SEH end address, and AMD64 IP2State addresses).
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D107784
Basic block pointer is dereferenced unconditionally for MBBs with
hasAddressTaken property.
MBBs might have hasAddressTaken property without reference to BB.
Backend developers must assign fake BB to MBB to workaround this issue
and it should be fixed.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D108092
This patch is a revert of e08f205f5c2c. In that patch, DW_TAG_subprograms
were permitted to be referenced across CU boundaries, to improve stack
trace construction using call site information. Unfortunately, as
documented in PR48790, the way that subprograms are "owned" by dwarf units
is sufficiently complicated that subprograms end up in unexpected units,
invalidating cross-unit references.
There's no obvious way to easily fix this, and several attempts have
failed. Revert this to ensure correct DWARF is always emitted.
Three tests change in addition to the reversion, but they're all very
light alterations.
Differential Revision: https://reviews.llvm.org/D107076
Previously we would emit constant pool entries for ldr inline asm at the
very end of AsmPrinter::doFinalization(). However, if we're emitting
dwarf aranges, that would end all sections with aranges. Then if we have
constant pool entries to be emitted in those same sections, we'd hit an
assert that the section has already been ended.
We want to emit constant pool entries before emitting dwarf aranges.
This patch splits out arm32/64's constant pool entry emission into its
own MCTargetStreamer virtual method.
Fixes PR51208
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D107314
This fixes an assert firing when compiling code which involves 128 bit
integrals.
This would trigger runtime checks similar to this:
```
Assertion failed: getMinSignedBits() <= 64 && "Too many bits for int64_t", file llvm/include/llvm/ADT/APInt.h, line 1646
```
To get around this, we just saturate those big values.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D105320
to encode the constants for DW_AT_data_member_location.
Summary: In DWARF v3, DW_FORM_data4/8 in
DW_AT_data_member_location are interpreted as location
list pointers. Interpreting constants as pointers is
not expected, so we use DW_FORM_udata to encode the
constants.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D105687
