Previously these would crash. I don't think these can be generated
directly from C. Not sure if any optimizations can introduce them.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D113527
Not all scalar element types are allowed in vectors so we may not
be able to bitcast to a 1 element vector to use insert/extract.
This will become a bigger issue when the Zve extensions are commited.
For now, I'm using the ELEN limit to limit the element types.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D113219
This is consistent with what we do for other operands that are required
to be constants.
I don't think this results in any real changes. The pattern match
code for isel treats ConstantSDNode and TargetConstantSDNode the same.
These and MULHS/MULHU both default to Legal. Targets need to set
the ones they don't support to Expand.
I think MULHS/MULHU likely has priority in most places so this
change probably isn't directly testable. I found it while looking
at disabling MULHS/MULHU for nxvXi64 as required for Zve64x.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D113325
Similar to D110206, this patch optimizes unmasked vp.load intrinsics to
avoid the need of a vmset instruction to set the mask. It does so by
selecting a riscv_vle intrinsic rather than a riscv_vle_mask intrinsic.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D113022
Add new hasVInstructions() which is currently equivalent.
Replace vector uses of hasStdExtZfh/F/D with new vector specific
versions. The vector spec no longer requires that the vectors implement the
same types as scalar. It only requires that the scalar type is
the maximum size the vectors can support. This is currently
implemented using the scalar rule we were using before.
Add new hasVInstructionsI64() begin using to qualify code that
requires i64 vector elements.
This is all NFC for now, but we can start using this to better
implement D112408 which introduces the Zve extensions.
Reviewed By: frasercrmck, eopXD
Differential Revision: https://reviews.llvm.org/D112496
This can avoid a loss of decoupling with the scalar unit on cores
with decoupled scalar and vector units.
We should support FP too, but those use extract_element and not a
custom ISD node so it is a little different. I also left a FIXME
in the test for i64 extract and store on RV32.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109482
If one input of a fixed vector multiply is a sign/zero extend and
the other operand is a splat of a scalar, we can use a widening
multiply if the scalar value has sufficient sign/zero bits.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110028
This particular case was creating a `VMSET_VL` using the old
fixed-length type in order to pass a mask to other custom nodes
operating on the scalable container type. This kind of thing wasn't
caught for us; I only noticed when experimenting with odd-length
vectors, where it was trying to generate an invalid `v3i1` MVT.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D110420
Add the tail policy argument to LLVM IR intrinsics. There are two policies for tail elements. Tail agnostic means users do not care about the values in the tail elements and tail undisturbed means the values in the tail elements need to be kept after the operation. In order to let users control the tail policy, we add an additional argument at the end of the argument list.
For unmasked operations, we have no maskedoff and the tail policy is always tail agnostic. If users want to keep tail elements under unmasked operations, they could use all one mask in the masked operations to do it. So, we only add the additional argument for masked operations for most cases. There are exceptions listed below.
In this patch, we do not handle the following cases to reduce the complexity of the patch. There could be two separate patches for them.
* Use dest argument to control tail policy
vmerge.vvm/vmerge.vxm/vmerge.vim (add _t builtins with additional dest argument)
vfmerge.vfm (add _t builtins with additional dest argument)
vmv.v.v (add _t builtins with additional dest argument)
vmv.v.x (add _t builtins with additional dest argument)
vmv.v.i (add _t builtins with additional dest argument)
vfmv.v.f (add _t builtins with additional dest argument)
vadc.vvm/vadc.vxm/vadc.vim (add _t builtins with additional dest argument)
vsbc.vvm/vsbc.vxm (add _t builtins with additional dest argument)
* Always has tail argument for masked/unmasked intrinsics
Vector Single-Width Integer Multiply-Add Instructions (add _t and _mt builtins)
Vector Widening Integer Multiply-Add Instructions (add _t and _mt builtins)
Vector Single-Width Floating-Point Fused Multiply-Add Instructions (add _t and _mt builtins)
Vector Widening Floating-Point Fused Multiply-Add Instructions (add _t and _mt builtins)
Vector Reduction Operations (add _t and _mt builtins)
Vector Slideup Instructions (add _t and _mt builtins)
Vector Slidedown Instructions (add _t and _mt builtins)
Discussion: https://github.com/riscv/rvv-intrinsic-doc/pull/101
Differential Revision: https://reviews.llvm.org/D105092
This patch adds codegen support for lowering the vector-predicated
reduction intrinsics to RVV instructions. The process is similar to that
of the other reduction intrinsics, save for the fact that every VP
reduction has a start value. We reuse the existing custom "VL" nodes,
adding extra patterns where required to handle non-true masks.
To support these nodes, the `RISCVISD::VECREDUCE_*_VL` nodes have been
given an explicit "merge" operand. This is to faciliate the VP
reductions, where we must be careful to ensure that even if no operation
is performed (when VL=0) we still produce the start value. The RVV
reductions don't update the destination register under these conditions,
so we tie the splatted start value to the output register.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107657
We can use riscv_vse intrinsic instead of riscv_vse_mask. The code here
is based on similar code for handling masked.scatter and vp.scatter.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110206
This requires a minor change to CodeGenPrepare to ensure that
shouldSinkOperands will be called for And.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D110106
Optimize (add (mul x, c0), c1) -> (ADDI (MUL (ADDI, c1/c0), c0), c1%c0),
if c1/c0 and c1%c0 are simm12, while c1 is not.
Optimize (add (mul x, c0), c1) -> (MUL (ADDI, c1/c0), c0),
if c1%c0 is zero, and c1/c0 is simm12 while c1 is not.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108607
For strided accesses the loop vectorizer seems to prefer creating a
vector induction variable with a start value of the form
<i32 0, i32 1, i32 2, ...>. This value will be incremented each
loop iteration by a splat constant equal to the length of the vector.
Within the loop, arithmetic using splat values will be done on this
vector induction variable to produce indices for a vector GEP.
This pass attempts to dig through the arithmetic back to the phi
to create a new scalar induction variable and a stride. We push
all of the arithmetic out of the loop by folding it into the start,
step, and stride values. Then we create a scalar GEP to use as the
base pointer for a strided load or store using the computed stride.
Loop strength reduce will run after this pass and can do some
cleanups to the scalar GEP and induction variable.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107790
LICM may have pulled out a splat, but with .vx instructions we
can fold it into an operation.
This patch enables CGP to reverse the LICM transform and move the
splat back into the loop.
I've started with the commutable integer operations and shifts, but we can
extend this with more operations in future patches.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109394
Since i128 isn't a legal C type on RV32, I don't believe
libgcc implements these functions for RV32. compiler-rt
does implement them because i128 support is enabled
in order to handle long double.
This is consistent with 32-bit X86 and ARM.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D109383
This patch adds support for the vector-predicated `VP_STORE` and
`VP_LOAD` nodes. We do this in the same way we lower `MSTORE` and
`MLOAD`: to regular load/store instructions via intrinsics.
One necessary change was made to `SelectionDAGLegalize` so that
`VP_STORE` nodes' operation actions are taken from the stored "value"
operands, in the same vein as `STORE` or `MSTORE`.
Reviewed By: craig.topper, rogfer01
Differential Revision: https://reviews.llvm.org/D108999
This patch adds support for the `VP_SCATTER` and `VP_GATHER` nodes by
lowering them to RVV's `vsox`/`vlux` instructions, respectively. This
process is almost identical to the existing `MSCATTER`/`MGATHER` support.
One extra change was made to `SelectionDAGLegalize` so that
`VP_SCATTER`'s operation action is derived from its stored "value"
operand rather than its return type (which is always the chain).
Reviewed By: craig.topper, rogfer01
Differential Revision: https://reviews.llvm.org/D108987
This patch changes the register class to avoid accidentally setting
the AVL operand to X0 through MachineIR optimizations.
There are cases where we really want to use X0, but we can't get that
past the MachineVerifier with the register class as GPRNoX0. So I've
use a 64-bit -1 as a sentinel for X0. All other immediate values should
be uimm5. I convert it to X0 at the earliest possible point in the VSETVLI
insertion pass to avoid touching the rest of the algorithm. In
SelectionDAG lowering I'm using a -1 TargetConstant to hide it from
instruction selection and treat it differently than if the user
used -1. A user -1 should be selected to a register since it doesn't
fit in uimm5.
This is the rest of the changes started in D109110. As mentioned there,
I don't have a failing test from MachineIR optimizations anymore.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D109116
If the true and false values are the same, we don't need a SELECT_CC.
This would normally be folded before a select is legalized to
select_cc. The test case exploits the late legalization of vscale
to trigger a case where they become identical after legalization.
This works around an issue found on a test case in D107957. In that
case the true/false values were both eventually 0 and the select was
used by a vector AVL operand. The select_cc got expanded to control
flow and a phi, but the phi inputs were both copies from X0. MachineIR
optimizations simplified this to a single copy from X0 going into the
vector instruction. This became the input of a vsetvli after vsetvli
insertion. Then register coalescing folded the copy into the vsetvli.
X0 as the source of a vsetvli is a special encoding and should not be
created by coalesing. We need to fix our vsetvli handling to make sure
this can never happen any other way, but removing the unneeded select
is still a worthwhile optimization.
Similar to D108842, D108844, D108926, D108928, and D108936.
__has_builtin(builtin_mul_overflow) returns true for 32b RISCV targets,
but Clang is deferring to compiler RT when encountering long long types.
If the semantics of __has_builtin mean "the compiler resolves these,
always" then we shouldn't conditionally emit a libcall.
Link: https://bugs.llvm.org/show_bug.cgi?id=28629
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D108939
This adds an ELEN limit for fixed length vectors. This will scalarize
any elements larger than this. It will also disable some fractional
LMULs. For example, if ELEN=32 then mf8 becomes illegal, i32/f32
vectors can't use any fractional LMULs, i16/f16 can only use mf2,
and i8 can use mf2 and mf4.
We may also need something for the scalable vectors, but that has
interactions with the intrinsics and we can't scalarize a scalable
vector.
Longer term this should come from one of the Zve* features
Similar to what we do for add/sub/mul.
This can help remove some sext.w. There are some regressions on
some bswap tests, but I have an idea how to fix that for a follow up.
A new PACKW pattern is added to handle the new sext_inreg placement.
Differential Revision: https://reviews.llvm.org/D108663
This encapsulates the APInt creation and worklist management into
a helper function.
To keep one common interface I've use Log2_32 in places that
previously created a mask by subtracting 1 from a power of 2.
Differential Revision: https://reviews.llvm.org/D108324
We already do this for non-constants RHS. This just removes the
special case. I believe the special case may have been needed
because the ANY_EXTEND of a constant used to create zero extended
constants, but we recently changed that to produce sign extended
constants.
D107658 is needed to prevent some regressions.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107697
Similar for sub except sub isn't commutative.
Modify the existing and/or/xor folds to also work on ISD::SELECT
and not just RISCVISD::SELECT_CC. This is needed to make sure
we do this transform before type legalization turns i32 add/sub
into add/sub+sign_extend_inreg on RV64. If we don't do this before
that, the sign_extend_inreg will still be after the select.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107603
Shuffles which are broken into separate halves reveal splats in which
a half is accessed via one index; such operations can be optimized to
use "vrgather.vi".
This optimization could be achieved by adding extra patterns to match
`vrgather_vv_vl` which uses a splat as an index operand, but this patch
instead identifies splat earlier. This way, future optimizations can
build on top of the data gathered here, e.g., to splat-gather dominant
indices and insert any leftovers.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D107449
Previously we converted ISD condition codes to integers and stored
them directly in our MIR instructions. The ISD enum kind of belongs
to SelectionDAG so that seems like incorrect layering.
This patch instead uses a CondCode node on RISCV::SELECT_CC until
isel and then converts it from ISD encoding to a RISCV specific value.
This value can be converted to/from the RISCV branch opcodes in the
RISCV namespace.
My larger motivation is to possibly support a microarchitectural
feature of some CPUs where a short forward branch over a single
instruction can be predicated internally. This will require a new
pseudo instruction for select that needs to carry a branch condition
and live probably until RISCVExpandPseudos. At that point it can be
expanded to control flow without other instructions ending up in the
predicated basic block. Using an ISD encoding in RISCVExpandPseudos
doesn't seem like correct layering.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107400
The fcvt fp to integer instructions saturate if their input is
infinity or out of range, but the instructions produce a maximum
integer for nan instead of 0 required for the ISD opcodes.
This means we can use the instructions to do the saturating
conversion, but we'll need to fix up the nan case at the end.
We can probably improve the i8 and i16 default codegen as well,
but I'll leave that for a follow up.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D107230
