Summary:
llvm-xray changes:
- account-mode - process-id {...} shows after thread-id
- convert-mode - process {...} shows after thread
- parses FDR and basic mode pid entries
- Checks version number for FDR log parsing.
Basic logging changes:
- Update header version from 2 -> 3
FDR logging changes:
- Update header version from 2 -> 3
- in writeBufferPreamble, there is an additional PID Metadata record (after thread id record and tsc record)
Test cases changes:
- fdr-mode.cc, fdr-single-thread.cc, fdr-thread-order.cc modified to catch process id output in the log.
Reviewers: dberris
Reviewed By: dberris
Subscribers: hiraditya, llvm-commits, #sanitizers
Differential Revision: https://reviews.llvm.org/D49153
llvm-svn: 336974
Summary:
This patch clears up some of the semantics within the Stage class. Now, preExecute
can be called multiple times per simulated cycle. Previously preExecute was
only called once per cycle, and postExecute could have been called multiple
times.
Now, cycleStart/cycleEnd are called only once per simulated cycle.
preExecute/postExecute can be called multiple times per cycle. This
occurs because multiple execution events can occur during a single cycle.
When stages are executed (Pipeline::runCycle), the postExecute hook will
be called only if all Stages return a success from their 'execute' callback.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D49250
llvm-svn: 336959
Not all programs want section ordering when compiled with LTO.
In particular, the Linux kernel is very sensitive when it comes to linking, and
doesn't boot when each function is placed in its own sections.
Reviewed By: pcc
Differential Revision: https://reviews.llvm.org/D48756
llvm-svn: 336943
Summary:
This option appears to have been dropped as part of the refactoring in
r331663. Unfortunately, if we want to use llvm-strip as a drop-in
replacement for strip, this option should still be available.
Reviewers: alexshap
Reviewed By: alexshap
Subscribers: meikeb, kongyi, chh, jakehehrlich, llvm-commits, pirama
Differential Revision: https://reviews.llvm.org/D49226
llvm-svn: 336921
Summary:
This patch eliminates some redundancy in iterating across Listeners for the
Instruction and Stall HWEvents, by introducing a template onEvent routine.
This change was suggested by @courbet in https://reviews.llvm.org/D48576. I
hope that this patch addresses that suggestion appropriately. I do like this
change better than what we had previously.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb, courbet
Subscribers: javed.absar, tschuett, gbedwell, llvm-commits, courbet
Differential Revision: https://reviews.llvm.org/D48672
llvm-svn: 336916
Some programs (e.g. Linux) aren't able to handle function/data sections when
LTO is used. Thus they need a way to disable it. That can be done with these
plugin options:
-plugin-opt=-function-sections=0
-plugin-opt=-data-sections=0
llvm-svn: 336838
This makes easier to identify changes in the instruction info flags. It also
helps spotting potential regressions similar to the one recently introduced at
r336728.
Using the same character to mark MayLoad/MayStore/HasSideEffects is problematic
for llvm-lit. When pattern matching substrings, llvm-lit consumes tabs and
spaces. A change in position of the flag marker may not trigger a test failure.
This patch only changes the character used for flag `hasSideEffects`. The reason
why I didn't touch other flags is because I want to avoid spamming the mailing
because of the massive diff due to the numerous tests affected by this change.
In future, each instruction flag should be associated with a different character
in the Instruction Info View.
llvm-svn: 336797
When manually finishing the object writer in dsymutil, it's possible
that there are pending labels that haven't been resolved. This results
in an assertion when the assembler tries to fixup a label that doesn't
have an address yet.
Differential revision: https://reviews.llvm.org/D49131
llvm-svn: 336688
debug compilation dir when compiling assembly files with -g.
Part of PR38050.
Patch by Siddhartha Bagaria!
Differential Revision: https://reviews.llvm.org/D48988
llvm-svn: 336680
When implementing the DWARF accelerator tables in dsymutil I ran into an
assertion in the assembler. Debugging these kind of issues is a lot
easier when looking at the assembly instead of debugging the assembler
itself. Since it's only a matter of creating an AsmStreamer instead of a
MCObjectStreamer it made sense to turn this into a (hidden) dsymutil
feature.
Differential revision: https://reviews.llvm.org/D49079
llvm-svn: 336561
This is a short-term fix for PR38093.
For now, we llvm::report_fatal_error if the instruction builder finds an
unsupported instruction in the instruction stream.
We need to revisit this fix once we start addressing PR38101.
Essentially, we need a better framework for error handling.
llvm-svn: 336543
The reference implementation uses a case-insensitive string
comparison for strings of equal length. This will cause the
string "tEo" to compare less than "VUo". However we were using
a case sensitive comparison, which would generate the opposite
outcome. Switch to a case insensitive comparison. Also, when
one of the strings contains non-ascii characters, fallback to
a straight memcmp.
The only way to really test this is with a DIA test. Before this
patch, the test will fail (but succeed if link.exe is used instead
of lld-link). After the patch, it succeeds even with lld-link.
llvm-svn: 336464
This patch moves the construction of the default backend from llvm-mca.cpp and
into mca::Context. The Context class is responsible for holding ownership of
the simulated hardware components. These components are subclasses of
HardwareUnit. Right now the HardwareUnit is pretty bare-bones, but eventually
we might want to add some common functionality across all hardware components,
such as isReady() or something similar.
I have a feeling this patch will probably need some updates, but it's a start.
One thing I am not particularly fond of is the rather large interface for
createDefaultPipeline. That convenience routine takes a rather large set of
inputs from the llvm-mca driver, where many of those inputs are generated via
command line options.
One item I think we might want to change is the separating of ownership of
hardware components (owned by the context) and the pipeline (which owns
Stages). In short, a Pipeline owns Stages, a Context (currently) owns hardware.
The Pipeline's Stages make use of the components, and thus there is a lifetime
dependency generated. The components must outlive the pipeline. We could solve
this by having the Context also own the Pipeline, and not return a
unique_ptr<Pipeline>. Now that I think about it, I like that idea more.
Differential Revision: https://reviews.llvm.org/D48691
llvm-svn: 336456
This diff adds support for handling static libraries
to llvm-objcopy and llvm-strip.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D48413
llvm-svn: 336455
Suppress the diagnostic for mis-sized dbg.values when a value operand is
narrower than the unsigned variable it describes. Assume that a debugger
would implicitly zero-extend these values.
llvm-svn: 336452
When emitting a CU, store the MCSymbol pointing to the beginning of the
CU. We'll need this information later when emitting the .debug_names
section (DWARF5 accelerator table).
llvm-svn: 336433
This patch modifies the Scheduler heuristic used to select the next instruction
to issue to the pipelines.
The motivating example is test X86/BtVer2/add-sequence.s, for which llvm-mca
wrongly reported an estimated IPC of 1.50. According to perf, the actual IPC for
that test should have been ~2.00.
It turns out that an IPC of 2.00 for test add-sequence.s cannot possibly be
predicted by a Scheduler that only prioritizes instructions based on their
"age". A similar issue also affected test X86/BtVer2/dependent-pmuld-paddd.s,
for which llvm-mca wrongly estimated an IPC of 0.84 instead of an IPC of 1.00.
Instructions in the ReadyQueue are now ranked based on two factors:
- The "age" of an instruction.
- The number of unique users of writes associated with an instruction.
The new logic still prioritizes older instructions over younger instructions to
minimize the pressure on the reorder buffer. However, the number of users of an
instruction now also affects the overall rank. This potentially increases the
ability of the Scheduler to extract instruction level parallelism. This patch
fixes the problem with the wrong IPC reported for test add-sequence.s and test
dependent-pmuld-paddd.s.
llvm-svn: 336420
Summary:
Add support for two additional ObjC image info flags: `IS_SIMULATED` and
`HAS_CATEGORY_CLASS_PROPERTIES`.
`IS_SIMULATED` indicates a Mach-O binary built for iOS simulator.
`HAS_CATEGORY_CLASS_PROPERTIES` indicates a Mach-O binary built by a compiler
that supports class properties in categories.
Reviewers: enderby, compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48568
llvm-svn: 336411
We add an option to dump the entire global / public symbol record
stream. Previously we would dump globals or publics, but not both.
And when we did dump them, we would always dump them in the order
they were referenced by the corresponding hash streams, not in
the order they were serialized in. This patch adds a lower level
mode that just dumps the whole stream in serialization order.
Additionally, when dumping global-extras, we now dump the hash
bitmap as well as the record offset instead of dumping all zeros
for the offsets.
llvm-svn: 336407
Summary:
Add support for two additional ObjC image info flags: `IS_SIMULATED` and
`HAS_CATEGORY_CLASS_PROPERTIES`.
`IS_SIMULATED` indicates a Mach-O binary built for iOS simulator.
`HAS_CATEGORY_CLASS_PROPERTIES` indicates a Mach-O binary built by a compiler
that supports class properties in categories.
Reviewers: enderby, compnerd
Reviewed By: compnerd
Subscribers: keith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48568
llvm-svn: 336399
The target does just enough to be able to run llvm-exegesis in latency mode for
at least some opcodes.
Differential Revision: https://reviews.llvm.org/D48780
llvm-svn: 336187
The verifier identified several modules that were broken due to incorrect
linkage on declarations. To fix this, CompileOnDemandLayer2::extractFunction
has been updated to change decls to external linkage.
llvm-svn: 336150
Different CodeBlocks don't overlap. The same MCInst cannot appear in more than
one code block because all blocks are instantiated before the simulation is run.
We should always clear the content of map VariantDescriptors before every
simulation, since VariantDescriptors cannot possibly store useful information
for the next blocks. It is also "safer" to clear its content because `MCInst*`
is used as the key type for map VariantDescriptors.
llvm-svn: 336142
On darwin, all virtual sections have zerofill type, and having a
.zerofill directive in a non-virtual section is not allowed. Instead of
asserting, show a nicer error.
In order to use the equivalent of .zerofill in a non-virtual section,
the usage of .zero of .space is required.
This patch replaces the assert with an error.
Differential Revision: https://reviews.llvm.org/D48517
llvm-svn: 336127
Summary:
This adds a new -no-weak flag to nm to hide weak symbols in its output.
This also adds a -W alias for this which is analogous to -U.
Patch by Keith Smiley
Reviewers: kastiglione, enderby, compnerd
Reviewed By: kastiglione
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48751
llvm-svn: 336126
Currently the llvm-exegesis native architecture is determined by comparing the
llvm native architecture with X86, so to add a new target would mean adding a
new check. Change this to building up a list of the targets llvm-exegesis
supports then using that, as this means that when adding a new target you just
add the target to the list of supported targets.
Differential Revision: https://reviews.llvm.org/D48778
llvm-svn: 336105
Currently the cycle counter is taken from the subtarget schedule model, which
isn't any use if the subtarget doesn't have one. Delegate the decision to the
target benchmark runner, as it may know better what to do in that case, with
the default being the current behaviour.
Differential Revision: https://reviews.llvm.org/D48779
llvm-svn: 336099
We were printing every character, even those that weren't printable. It
doesn't really make sense for this option.
The string content was sticked to its address, added two spaces in
between.
Differential Revision: https://reviews.llvm.org/D48271
llvm-svn: 336058
The original binary holder has an optimization where it caches a static
library (archive) between consecutive calls to GetObjects. However, the
actual memory buffer wasn't cached between calls.
This made sense when dsymutil was processing objects one after each
other, but when processing them in parallel, several binaries have to be
in memory at the same time. For this reason, every link context
contained a binary holder.
Having one binary holder per context is problematic, because the same
static archive was cached for every object file. Luckily, when the file
is mmap'ed, this was only costing us virtual memory.
This patch introduces a new BinaryHolder variant that is fully cached,
for all the object files it load, as well as the static archives. This
way, we don't have to give up on this optimization of bypassing the
file system.
Differential revision: https://reviews.llvm.org/D48501
llvm-svn: 335990
