gettimeofday() isn't defined without a special header. Rather
than rely on C apis, let's just use modern C++11 to do this
portably on all platforms using std::chrono.
llvm-svn: 278182
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
It only contained a reimplementation of std::to_string, which I have replaced with usages of
pre-existing llvm::to_string (also, injecting members into the std namespace is evil).
llvm-svn: 278000
This finally removes the use of the Mutex and Condition classes. This is an
intricate patch as the Mutex and Condition classes were tied together.
Furthermore, many places had slightly differing uses of time values. Convert
timeout values to relative everywhere to permit the use of
std::chrono::duration, which is required for the use of
std::condition_variable's timeout. Adjust all Condition and related Mutex
classes over to std::{,recursive_}mutex and std::condition_variable.
This change primarily comes at the cost of breaking the TracingMutex which was
based around the Mutex class. It would be possible to write a wrapper to
provide similar functionality, but that is beyond the scope of this change.
llvm-svn: 277011
Summary:
We've had two copies of code for launching processes:
- one in NativeProcessLinux, used for launching debugged processes
- one in ProcessLauncherAndroid, used on android for launching all other kinds of processes
These have over time acquired support for various launch options, but neither supported all of
them. I now replace them with a single implementation ProcessLauncherLinux, which supports all
the options the individual versions supported and set it to be used to launch all processes on
linux.
This also works around the ETXTBSY issue on android when the process is started from the platform
instance, as that used to go through the version which did not contain the workaround.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D22457
llvm-svn: 276288
trade-offs. When LLDB's multi-line editing support was first introduced
for expressions / REPL contexts the behavior was as follows:
* The Return key is treated as a line-break except at the end of the input
buffer, where a completeness test is applied
This worked well enough when writing code, and makes it trivial to insert
new lines above code you've already typed. Just use cursor navigation to
move up and type freely. Where it was awkward is that the gesture to insert
a line break and end editing is conflated for most people. Sometimes you
want Return to end the editing session and other times you want to insert
a line break.
This commit changes the behavior as follows:
* The Return key is treated as the end of editing except at the end of the
input buffer, where a completeness test is applied
* The Meta+Return sequence is always treated as a line break. This is
consistent with conventions in Facebook and elsewhere since
Alt/Option+Return is often mapped to Meta+Return. The unfortunate
exception is on macOS where this *can* be the case, but isn't by
default. Sigh.
Note that by design both before and after the patch pasting a Return
character always introduces a line break.
<rdar://problem/26886287>
llvm-svn: 275482
for TestNamespaceLookup.py; didn't see anything obviously wrong so I'll
need to look at this more closely before re-committing. (passed OK on
macOS ;)
llvm-svn: 273531
There's uses of "macosx" that will be more tricky to
change, like in triples (e.g. "x86_64-apple-macosx10.11") -
for now I'm just updating source comments and strings printed
for humans.
llvm-svn: 273524
Summary:
In the case of client sockets, we are not binding to a specific port, so we
should be able to just request a new one. Disregarding refactors, this code
has been here since the initial LLDB checkin, so I was unable to figure out
whether it was added as a fix for a specific problem, or just for symmetry
with server sockets, but I see no side-effect from removing it now. I was
still able to create 10000 connections within a couple of seconds, so I think
it's unlikely we will exhaust the port space (previously, I would get an
error after a couple thousand connections).
This fixes an occasional issue with connecting to the android debug bridge
deamon on OSX when running the test suite, which would occasionaly fail with
EADDRINUSE. My best guess is that this was happening because two processes
were assigned the same client port number, and then things blew up because
they were both trying to connect to the same ADB server port. I have not
observed this issue happening on Linux or Windows.
Reviewers: clayborg
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D21088
llvm-svn: 272041
When USE_SETUPTERM_WORKAROUND is enabled, we were calling setupterm() multiple times and leaking memory on each subsequent call. This is now fixed by calling setupterm() once in the constructor and tracking if we have already setup a terminal for a file descriptor.
Calls to "el_set (m_editline, EL_ADDFN, ..." were leaking memory. If we switch over to call el_wset with wide strings when LLDB_EDITLINE_USE_WCHAR is set, then we no longer leak memory each time we construct a new Editline object.
The calls to "el_set (m_editline, EL_ADDFN, ..." were changed over to call "el_wset (m_editline, EL_ADDFN, ...". Note that when LLDB_EDITLINE_USE_WCHAR is not defined, then el_wset is #define'ed to el_set. All strings are wrapped in EditLineConstString which will use wide strings when needed, and normal C strings when LLDB_EDITLINE_USE_WCHAR is not defined.
<rdar://problem/26677627>
llvm-svn: 272036
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
Summary:
This replaces the C-style "void *" baton of the child process monitoring functions with a more
C++-like API taking a std::function. The motivation for this was that it was very difficult to
handle the ownership of the object passed into the callback function -- each caller ended up
implementing his own way of doing it, some doing it better than others. With the new API, one can
just pass a smart pointer into the callback and all of the lifetime management will be handled
automatically.
This has enabled me to simplify the rather complicated handshake in Host::RunShellCommand. I have
left handling of MonitorDebugServerProcess (my original motivation for this change) to a separate
commit to reduce the scope of this change.
Reviewers: clayborg, zturner, emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D20106
llvm-svn: 269205
Summary:
AdbClient was attempting to handle the case where the socket input arrived in pieces, but it was
failing to handle the case where the connection was closed before that happened. In this case, it
would just spin in an infinite loop calling Connection::Read. (This was also the cause of the
spurious timeouts on the darwin->android buildbot. The exact cause of the premature EOF remains
to be investigated, but is likely a server bug.)
Since this wait-for-a-certain-number-of-bytes seems like a useful functionality to have, I am
moving it (with the infinite loop fixed) to the Connection class, and adding an
appropriate test for it.
Reviewers: clayborg, zturner, ovyalov
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D19533
llvm-svn: 268380
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
Summary:
In D18689, I removed the call to Normalize() in FileSpec::SetFile, because it no longer seemed
needed, and it resolved a quirk in the FileSpec API (spec.GetCString() returnes a path with
backslashes, but spec.GetDirectory().GetCString() has forward slashes). This turned out to be a
problem because we would consider paths with different separators as different (which led to
unresolved breakpoints for instance).
Here, I am putting back in the call to Normalize() and adding a unittest for FileSpec::Equal. I
am commenting out the GetDirectory unittests until we figure out the what is the expected
behaviour here.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D19060
llvm-svn: 266286
Summary:
Even though FileSpec attempted to handle both kinds of path syntaxes (posix and windows) on both
platforms, it relied on the llvm path library to do its work, whose behavior differed on
different platforms. This led to subtle differences in FileSpec behavior between platforms. This
replaces the pieces of the llvm library with our own implementations. The functions are simply
copied from llvm, with #ifdefs replaced by runtime checks for ePathSyntaxWindows.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18689
llvm-svn: 265299
Win32 API calls that are Unicode aware require wide character
strings, but LLDB uses UTF8 everywhere. This patch does conversions
wherever necessary when passing strings into and out of Win32 API
calls.
Patch by Cameron
Differential Revision: http://reviews.llvm.org/D17107
Reviewed By: zturner, amccarth
llvm-svn: 264074
Summary:
This fixes a couple of corner cases in FileSpec, related to AppendPathComponent and
handling of root directory (/) file spec. I add a bunch of unit tests for the new behavior.
Summary of changes:
FileSpec("/bar").GetCString(): before "//bar", after "/bar".
FileSpec("/").CopyByAppendingPathComponent("bar").GetCString(): before "//bar", after "/bar".
FileSpec("C:", ePathSyntaxWindows).CopyByAppendingPathComponent("bar").GetCString(): before "C:/bar", after "C:\bar".
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18044
llvm-svn: 263207
Removed lldb_private::File::Duplicate() and the copy constructor and the assignment operator that used to duplicate the file handles and made them private so no one uses them. Previously the lldb_private::File::Duplicate() function duplicated files that used file descriptors, (int) but not file streams (FILE *), so the lldb_private::File::Duplicate() function only worked some of the time. No one else excep thee ScriptInterpreterPython was using these functions, so that aren't needed nor desired. Previously every time you would drop into the python interpreter we would duplicate files, and now we avoid this file churn.
<rdar://problem/24877720>
llvm-svn: 263161
PDB is Microsoft's debug information format, and although we
cannot yet generate it, we still must be able to consume it.
Reason for this is that debug information for system libraries
(e.g. kernel32, C Runtime Library, etc) only have debug info
in PDB format, so in order to be able to support debugging
of system code, we must support it.
Currently this code should compile on every platform, but on
non-Windows platforms the PDB plugin will return 0 capabilities,
meaning that for now PDB is only supported on Windows. This
may change in the future, but the API is designed in such a way
that this will require few (if any) changes on the LLDB side.
In the future we can just flip a switch and everything will
work.
This patch only adds support for line tables. It does not return
information about functions, types, global variables, or anything
else. This functionality will be added in a followup patch.
Differential Revision: http://reviews.llvm.org/D17363
Reviewed by: Greg Clayton
llvm-svn: 262528
Paths on Windows are not case-sensitive. Because of this, if a file
is called main.cpp, you should be able to set a breakpoint on it
by using the name Main.cpp. In an ideal world, you could just
tell people to match the case, but in practice this can be a real
problem as it requires you to know whether the person who compiled
the program ran "clang++ main.cpp" or "clang++ Main.cpp", both of
which would work, regardless of what the file was actually called.
This fixes http://llvm.org/pr22667
Patch by Petr Hons
Differential Revision: http://reviews.llvm.org/D17492
Reviewed by: zturner
llvm-svn: 261771
65535 is still a valid port. This should fix the android failures we were getting when we chose
to connect over 65535 to the remote lldb-server.
llvm-svn: 259638
On Mac OS X, this was working just fine in debug builds (presumably, because the right value ended up being at the right location for the variadic ABI), but not in Release builds
As a result, we were seeing failures with commands that set their own immediate output stream - only in Release builds, which always makes for a fun little investigation
I have removed those fcntl() calls and replaced them with dup() calls. This fixes the issue in both Debug and Release builds
llvm-svn: 258367
The FixIndentationCommand implementation has proven to be fragile across various libedit iterations. This patch reworks the command to use the same basic strategy as when moving between lines in a multi-line edit session: when indentation changes are required, exit line editing completely and restart with amended content. This approach won't be susceptible to subtle behavior differences libedit has introduced over time.
llvm-svn: 255548
This code was modifying the cursor and then expecting the editline
API call to see the effect for the next operation. This is misusing
the API. Newer editlines break on this code, fixed by this.
llvm-svn: 251457
m_directory = "/tmp"
m_filename = "."
To look like:
m_directory = "/tmp/."
m_filename = "foo.txt"
if "foo.txt" was appended to it. With this fix it will be:
m_directory = "/tmp"
m_filename = "foo.txt"
llvm-svn: 250770
A REPL takes over the command line and typically treats input as source code.
REPLs can also do code completion. The REPL class allows its subclasses to
implement the language-specific functionality without having to know about the
IOHandler-specific internals.
Also added a PluginManager-based way of getting to a REPL given a language and
a target.
Also brought in some utility code and expression options that are useful for
REPLs, such as line offsets for expressions, ANSI terminal coloring of errors,
and a few IOHandler convenience functions.
llvm-svn: 250753
There were a number of const qualifiers being cast away which caused warnings.
This cluttered the output hiding real errors. Silence them by explicit casting.
NFC.
llvm-svn: 250662
Summary:
On linux, the environment variables for temp directories that lldb checks for are generally not
defined, and the temp directory computation failed. This caused expression evaluation to fall
back to creating "/tmp/lldb-*.expr" debugging files instead of the usual
"$TMP/lldb/pid/lldb-*.expr". Crucially, these files were not cleaned up on lldb exit, which
caused clutter in the /tmp folder, especially on long-running machines (e.g. builtbots). This
commit fixes lldb to use llvm::sys::path::system_temp_directory, which does the same environment
variable dance, but (!) also falls back to the P_tmpdir macro, which is how the temp directory is
defined on linux.
Since the linux temp path computation now succeeds, I needed to also modify Android path
computation to check for actual directory existence, rather then checking whether the operation
failed.
Reviewers: clayborg, tberghammer
Subscribers: tberghammer, lldb-commits, danalbert, srhines, emaste
Differential Revision: http://reviews.llvm.org/D13772
llvm-svn: 250502
Python file handling got an overhaul in Python 3, and it affects
the way we have to interact with files. Notably:
1) `PyFile_FromFile` no longer exists, and instead we have to use
`PyFile_FromFd`. This means having a way to get an fd from
a FILE*. For this we reuse the lldb_private::File class to
convert between FILE*s and fds, since there are some subtleties
regarding ownership rules when FILE*s and fds refer to the same
file.
2) PyFile is no longer a builtin type, so there is no such thing as
`PyFile_Check`. Instead, files in Python 3 are just instances
of `io.IOBase`. So the logic for checking if something is a file
in Python 3 is to check if it is a subclass of that module.
Additionally, some unit tests are added to verify that `PythonFile`
works as expected on Python 2 and Python 3, and
`ScriptInterpreterPython` is updated to use `PythonFile` instead of
manual calls to the various `PyFile_XXX` methods.
llvm-svn: 250444
