It was only ever used there, already. The previous location seems
left-over from when the personality function was specified on a
per-landingpad basis, instead of per-function.
This change removes the `tidyLandingPads` function, which previously
had a few responsibilities:
1. Dealing with the deletion of an invoke, after MachineFunction lowering.
2. Dealing with the deletion of a landing pad BB, after MachineFunction lowering.
3. Cleaning up the type-id list generated by `MachineFunction::addLandingPad`.
Case 3 has been fixed in the generator, and the others are now handled
during table emission.
This change also removes `MachineFunction`'s `addCatchTypeInfo`,
`addFilterTypeInfo`, and `addCleanup` helper fns, as they had a single
caller, and being outlined didn't make it simpler.
Finally, as calling `tidyLandingPads` was effectively the only thing
`DwarfCFIExceptionBase` did, that class has been eliminated.
The existing behaviors and callbacks were overlapping and had very
confusing semantics: beginBasicBlock/endBasicBlock were not always
called, beginFragment/endFragment seemed like they were meant to mean
the same thing, but were slightly different, etc. This resulted in
confusing semantics, virtual method overloads, and control flow.
Remove the above, and replace with new beginBasicBlockSection and
endBasicBlockSection callbacks. And document them.
These are always called before the first and after the last blocks in
a function, even when basic-block-sections are disabled.
During fast-isel calling 'markFunctionEnd' in the base class will call
tidyLandingPads. This can cause an issue where we have determined that
we need ehinfo and emitted a traceback table with the bits set to
indicate that we will be emitting the ehinfo, but the tidying deletes
all landing pads. In this case we end up emitting a reference to
__ehinfo.N symbol, but not emitting a definition to said symbol and the
resulting file fails to assemble.
Differential Revision: https://reviews.llvm.org/D117040
The data member 'shouldEmitMoves' is only used in DwarfCFIException::beginFunction()
and 'shouldEmitCFI' in DwarfCFIExceptionBase serves its purpose.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101155
Summary:
AIX uses the existing EH infrastructure in clang and llvm.
The major differences would be
1. AIX do not have CFI instructions.
2. AIX uses a new personality routine, named __xlcxx_personality_v1.
It doesn't use the GCC personality rountine, because the
interoperability is not there yet on AIX.
3. AIX do not use eh_frame sections. Instead, it would use a eh_info
section (compat unwind section) to store the information about
personality routine and LSDA data address.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D91455
This patch handles CFI with basic block sections, which unlike DebugInfo does
not support ranges. The DWARF standard explicitly requires emitting separate
CFI Frame Descriptor Entries for each contiguous fragment of a function. Thus,
the CFI information for all callee-saved registers (possibly including the
frame pointer, if necessary) have to be emitted along with redefining the
Call Frame Address (CFA), viz. where the current frame starts.
CFI directives are emitted in FDE’s in the object file with a low_pc, high_pc
specification. So, a single FDE must point to a contiguous code region unlike
debug info which has the support for ranges. This is what complicates CFI for
basic block sections.
Now, what happens when we start placing individual basic blocks in unique
sections:
* Basic block sections allow the linker to randomly reorder basic blocks in the
address space such that a given basic block can become non-contiguous with the
original function.
* The different basic block sections can no longer share the cfi_startproc and
cfi_endproc directives. So, each basic block section should emit this
independently.
* Each (cfi_startproc, cfi_endproc) directive will result in a new FDE that
caters to that basic block section.
* Now, this basic block section needs to duplicate the information from the
entry block to compute the CFA as it is an independent entity. It cannot refer
to the FDE of the original function and hence must duplicate all the stuff that
is needed to compute the CFA on its own.
* We are working on a de-duplication patch that can share common information in
FDEs in a CIE (Common Information Entry) and we will present this as a follow up
patch. This can significantly reduce the duplication overhead and is
particularly useful when several basic block sections are created.
* The CFI directives are emitted similarly for registers that are pushed onto
the stack, like callee saved registers in the prologue. There are cfi
directives that emit how to retrieve the value of the register at that point
when the push happened. This has to be duplicated too in a basic block that is
floated as a separate section.
Differential Revision: https://reviews.llvm.org/D79978
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Rely on the assembler to finalize the layout of the DWARF/Itanium
exception-handling LSDA. Rather than calculate the exact size of each
thing in the LSDA, use assembler directives:
To emit the offset to the TTBase label:
.uleb128 .Lttbase0-.Lttbaseref0
.Lttbaseref0:
To emit the size of the call site table:
.uleb128 .Lcst_end0-.Lcst_begin0
.Lcst_begin0:
... call site table entries ...
.Lcst_end0:
To align the type info table:
... action table ...
.balign 4
.long _ZTIi
.long _ZTIl
.Lttbase0:
Using assembler directives simplifies the compiler and allows switching
the encoding of offsets in the call site table from udata4 to uleb128 for
a large code size savings. (This commit does not change the encoding.)
The combination of the uleb128 followed by a balign creates an unfortunate
dependency cycle that the assembler must sometimes resolve either by
padding an LEB or by inserting zero padding before the type table. See
PR35809 or GNU as bug 4029.
Patch by Ryan Prichard!
llvm-svn: 324749
GNU as rejects input where .cfi_sections is used after .cfi_startproc,
if the new section differs from the old. Adjust our output to always
emit .cfi_sections before the first .cfi_startproc to minimize necessary
code.
Differential Revision: https://reviews.llvm.org/D28011
llvm-svn: 290817
Summary: This is extracted from D17555
Reviewers: davidxl, reames, sanjoy, MatzeB, pete
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17580
llvm-svn: 262058
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
llvm-svn: 234679
In the case where just tables are part of the function section, this produces
more readable assembly by avoiding switching to the eh section and back
to .text.
This would also break with non unique section names, as trying to switch to
a unique section actually creates a new one.
llvm-svn: 231677
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
DwarfException served as a base class for exception handling directive emission.
However, this is also used by other exception models (e.g. Win64EH). Rename
this class to EHStreamer and split it out of DwarfException.h. NFC.
Use the opportunity to fix up some of the documentation comments to match
current LLVM style. Also rename some functions to conform better with current
LLVM coding style.
llvm-svn: 210622
This patch fixes an old FIXME by creating a MCTargetStreamer interface
and moving the target specific functions for ARM, Mips and PPC to it.
The ARM streamer is still declared in a common place because it is
used from lib/CodeGen/ARMException.cpp, but the Mips and PPC are
completely hidden in the corresponding Target directories.
I will send an email to llvmdev with instructions on how to use this.
llvm-svn: 192181
It was just a less powerful and more confusing version of
MCCFIInstruction. A side effect is that, since MCCFIInstruction uses
dwarf register numbers, calls to getDwarfRegNum are pushed out, which
should allow further simplifications.
I left the MachineModuleInfo::addFrameMove interface unchanged since
this patch was already fairly big.
llvm-svn: 181680
this clang will use .debug_frame in, for example,
clang -g -c -m32 test.c
This matches gcc's behaviour. It looks like .debug_frame is a bit bigger
than .eh_frame, but has the big advantage of not being allocated.
llvm-svn: 131140
the variable actually tracks.
N.B., several back-ends are using "HasCalls" as being synonymous for something
that adjusts the stack. This isn't 100% correct and should be looked into.
llvm-svn: 103802
instead of label ID's. This cleans up and regularizes a bunch
of code and makes way for future progress.
Unfortunately, this pointed out to me that JITDwarfEmitter.cpp
is largely copy and paste from DwarfException/MachineModuleInfo
and other places. This is very sad and disturbing. :(
One major change here is that TidyLandingPads moved from being
called in DwarfException::BeginFunction to being called in
DwarfException::EndFunction. There should not be any
functionality change from doing this, but I'm not an EH expert.
llvm-svn: 98459
