Linux kernel fs/binfmt_elf_fdpic.c supports FDPIC for MMU-less systems.
GCC/binutils/qemu support FDPIC ABI for ARM
(https://github.com/mickael-guene/fdpic_doc).
_ARM FDPIC Toolchain and ABI_ provides a summary.
This patch implements FDPIC relocations to the integrated assembler.
There are 6 static relocations and 2 dynamic relocations, with
R_ARM_FUNCDESC as both static and dynamic.
gas requires `--fdpic` to assemble data relocations like `.word f(FUNCDESC)`.
This patch adds `MCTargetOptions::FDPIC` and reports an error if FDPIC
is not set.
Pull Request: https://github.com/llvm/llvm-project/pull/82187
In WebAssembly, we have `WASM_SYMBOL_NO_STRIP` symbol flag to mark the
referenced content as retained. However, the flag is not enough to
express retained data that is not referenced by any symbol. This patch
adds a new segment flag`WASM_SEG_FLAG_RETAIN` to support "private"
linkage data that is retained by llvm.used.
This kind of data that is not referenced but must be retained is usually
used with encapsulation symbols (__start/__stop). Swift runtime uses
this technique and depends on the fact "all metadata sections in live
objects are retained", which was not guaranteed with `--gc-sections`
before this patch.
This is a revised version of https://reviews.llvm.org/D126950 (has been
reverted) based on @MaskRay's comments
The section headers for XCOFF files have a subtype flag for Dwarf
sections. This PR updates obj2yaml, yaml2obj, and llvm-readobj so that
they recognize the subtype.
This commit brings support for debug_names in DWARFYAML. It parses YAML
and generates emits a DWARF5 Accelerator table with the following
limitations:
1. All forms must have a fixed length (zero length is also ok).
2. Hard-coded support for DWARF 5 and DWARF32.
3. The generated table does not contain a hash index
All of these limitations can be lifted in the future, but for now this
is good enough to enable testing.
This adds the following values to the CodeView.h enums (and updates the
various functions that use them):
* CPUType:
* Added `Unknown`
* This is not currently documented in the online documentation, but this
is present in `cvconst.h` in the latest DIA SDK (Visual Studio 2022,
17.7.6)
* `Unknown` is the CPUType that is emitted by `aliasobj.exe` in the
Compile3Sym records, and can be found in objects that link with
`oldnames.lib`
* SourceLanguage (All of these are documented at
https://learn.microsoft.com/en-us/visualstudio/debugger/debug-interface-access/cv-cfl-lang?view=vs-2022
and are present in `cvconst.h` in the latest DIA SDK (Visual Studio
2022, 17.7.6))
* Added Go
* Added AliasObj
* emitted by `aliasobj.exe` in certain records, can be found in PDBs
that link with `oldnames.lib`
* Changed Swift to the official Microsoft enumeration
* Added `OldSwift`
* The old Swift enumeration of `S` was changed to `OldSwift` to allow
pdb dumping utilities to continue to emit correct source language
information for old PDBs
### WARNING
The `Swift` change is a potentially breaking change, as the swift
compiler will now emit `0x13` for the SourceLanguage type in PDB records
instead of `S`. This could potentially break utilities that relied on
the old enum value.
* CallType
* Added Swift
* This is not currently documented in the online documentation, but this
is present in `cvconst.h` in the latest DIA SDK (Visual Studio 2022,
17.7.6)
These generic targets include multiple GPUs and will, in the future,
provide a way to build once and run on multiple GPU, at the cost of less
optimization opportunities.
Note that this is just doing the compiler side of things, device libs an
runtimes/loader/etc. don't know about these targets yet, so none of them
actually work in practice right now. This is just the initial commit to
make LLVM aware of them.
This contains the documentation changes for both this change and #76954
as well.
yaml2obj creates invalid object files even when the input was created by
obj2yaml using a valid object file. On the other hand, yaml2obj is used
to intentionally create invalid object files for testing purposes.
This update balances using specified input values when provided and
computing file offsets and sizes if necessary.
XCOFF encodes a symbol type and alignment in a single 8-bit field. It is
easier to read and write YAML files if the fields can be specified
separately. This PR causes obj2yaml to write the fields separately and
allows yaml2obj to read either the single combined field or the separate
fields.
Introduce Code Object V6 in Clang, LLD, Flang and LLVM. This is the same
as V5 except a new "generic version" flag can be present in EFLAGS. This
is related to new generic targets that'll be added in a follow-up patch.
It's also likely V6 will have new changes (possibly new metadata
entries) added later.
Docs change are part of the follow-up patch #76955
Today `-split-machine-functions` and `-fbasic-block-sections={all,list}`
cannot be combined with `-basic-block-sections=labels` (the labels
option will be ignored).
The inconsistency comes from the way basic block address map -- the
underlying mechanism for basic block labels -- encodes basic block
addresses
(https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html).
Specifically, basic block offsets are computed relative to the function
begin symbol. This relies on functions being contiguous which is not the
case for MFS and basic block section binaries. This means Propeller
cannot use binary profiles collected from these binaries, which limits
the applicability of Propeller for iterative optimization.
To make the `SHT_LLVM_BB_ADDR_MAP` feature work with basic block section
binaries, we propose modifying the encoding of this section as follows.
First let us review the current encoding which emits the address of each
function and its number of basic blocks, followed by basic block entries
for each basic block.
| | |
|--|--|
| Address of the function | Function Address |
| Number of basic blocks in this function | NumBlocks |
| BB entry 1
| BB entry 2
| ...
| BB entry #NumBlocks
To make this work for basic block sections, we treat each basic block
section similar to a function, except that basic block sections of the
same function must be encapsulated in the same structure so we can map
all of them to their single function.
We modify the encoding to first emit the number of basic block sections
(BB ranges) in the function. Then we emit the address map of each basic
block section section as before: the base address of the section, its
number of blocks, and BB entries for its basic block. The first section
in the BB address map is always the function entry section.
| | |
|--|--|
| Number of sections for this function | NumBBRanges |
| Section 1 begin address | BaseAddress[1] |
| Number of basic blocks in section 1 | NumBlocks[1] |
| BB entries for Section 1
|..................|
| Section #NumBBRanges begin address | BaseAddress[NumBBRanges] |
| Number of basic blocks in section #NumBBRanges |
NumBlocks[NumBBRanges] |
| BB entries for Section #NumBBRanges
The encoding of basic block entries remains as before with the minor
change that each basic block offset is now computed relative to the
begin symbol of its containing BB section.
This patch adds a new boolean codegen option `-basic-block-address-map`.
Correspondingly, the front-end flag `-fbasic-block-address-map` and LLD
flag `--lto-basic-block-address-map` are introduced.
Analogously, we add a new TargetOption field `BBAddrMap`. This means BB
address maps are either generated for all functions in the compiling
unit, or for none (depending on `TargetOptions::BBAddrMap`).
This patch keeps the functionality of the old
`-fbasic-block-sections=labels` option but does not remove it. A
subsequent patch will remove the obsolete option.
We refactor the `BasicBlockSections` pass by separating the BB address
map and BB sections handing to their own functions (named
`handleBBAddrMap` and `handleBBSections`). `handleBBSections` renumbers
basic blocks and places them in their assigned sections.
`handleBBAddrMap` is invoked after `handleBBSections` (if requested) and
only renumbers the blocks.
- New tests added:
- Two tests basic-block-address-map-with-basic-block-sections.ll and
basic-block-address-map-with-mfs.ll to exercise the combination of
`-basic-block-address-map` with `-basic-block-sections=list` and
'-split-machine-functions`.
- A driver sanity test for the `-fbasic-block-address-map` option
(basic-block-address-map.c).
- An LLD test for testing the `--lto-basic-block-address-map` option.
This reuses the LLVM IR from `lld/test/ELF/lto/basic-block-sections.ll`.
- Renamed and modified the two existing codegen tests for basic block
address map (`basic-block-sections-labels-functions-sections.ll` and
`basic-block-sections-labels.ll`)
- Removed `SHT_LLVM_BB_ADDR_MAP_V0` tests. Full deprecation of
`SHT_LLVM_BB_ADDR_MAP_V0` and `SHT_LLVM_BB_ADDR_MAP` version less than 2
will happen in a separate PR in a few months.
This change allows a WasmObjectFile to be created from a wasm file even
if it uses typed funcrefs and GC types. It does not significantly change how
lib/Object models its various internal types (e.g. WasmSignature,
WasmElemSegment), so LLVM does not really "support" or understand such
files, but it is sufficient to parse the type, global and element sections, discarding
types that are not understood. This is useful for low-level binary tools such as
nm and objcopy, which use only limited aspects of the binary (such as function
definitions) or deal with sections as opaque blobs.
This is done by allowing `WasmValType` to have a value of `OTHERREF`
(representing any unmodeled reference type), and adding a field to
`WasmSignature` indicating it's a placeholder for an unmodeled reference
type (since there is a 1:1 correspondence between WasmSignature objects
and types in the type section).
Then the object file parsers for the type and element sections are expanded
to parse encoded reference types and discard any unmodeled fields.
This PR implements part 1 of yaml2obj for the GOFF Object File Format.
It adds support for the header and end records.
---------
Co-authored-by: Yusra Syeda <yusra.syeda@ibm.com>
Reviewed in PR (#71750). A part of [RFC - PGO Accuracy Metrics: Emitting and Evaluating Branch
and Block
Analysis](https://discourse.llvm.org/t/rfc-pgo-accuracy-metrics-emitting-and-evaluating-branch-and-block-analysis/73902).
This PR adds the PGOAnalysisMap data structure and implements encoding and
decoding through Object and ObjectYAML along with associated tests. When
emitted into the bb-addr-map section, each function is followed by the associated
pgo-analysis-map for that function. The emitting of each analysis in the map is
controlled by a bit in the bb-addr-map feature byte. All existing bb-addr-map
code can ignore the pgo-analysis-map if the caller does not request the data.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an
enum. This patch replaces support::{big,little,native} with
llvm::endianness::{big,little,native}.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an enum.
This patch replaces llvm::support::{big,little,native} with
llvm::endianness::{big,little,native}.
Now that llvm::support::endianness has been renamed to
llvm::endianness, we can use the shorter form. This patch replaces
support::endianness with llvm::endianness.
For DirectX, program signatures are encoded into three different binary
sections depending on if the signature is for inputs, outputs, or
patches. All three signature types use the same data structure encoding
so they can share a lot of logic.
This patch adds support for reading and writing program signature data
as both yaml and binary data.
Fixes#57743 and #57744
Fixes a crash in `-Wl,-emit-relocs` where the linker was not able to
write linker-synthetic absolute symbols to the symbol table.
This change adds a new symbol flag (`WASM_SYMBOL_ABS`), which means that
the symbol's offset is absolute and not relative to a given segment.
Such symbols include `__stack_low` and `__stack_low`.
Note that wasm object files never contains such symbols, only binaries
linked with `-Wl,-emit-relocs`.
Fixes: #67111
The DXContainer pipeline state information encodes a bunch of mask
vectors that are used to track things about the inputs and outputs from
each shader.
This adds support for reading and writing them throught he YAML test
interfaces. The writing logic in MC is extremely primitive and we'll
want to revisit the API for that, but since I'm not sure how we'll want
to generate the mask bits from DXIL during code generation I didn't want
to spend too much time on the API.
Fixes#59479
Support printing of symbols for MachO of `MH_FILESET` type.
This is achieved by extending `dumpSymbolNamesFromObject`
to encompass fileset handling, and including an offset in
`MachOObjectFile` class to locate embedded MachO headers.
Differential Revision: https://reviews.llvm.org/D159294
SmallString<0> is more flexible and avoids an unneeded copy in
ObjectYAML/OffloadEmitter.cpp.
Reviewed By: jhuber6
Differential Revision: https://reviews.llvm.org/D159335
The CodeView `S_ARMSWITCHTABLE` debug symbol is used to describe the layout of a jump table, it contains the following information:
* The address of the branch instruction that uses the jump table.
* The address of the jump table.
* The "base" address that the values in the jump table are relative to.
* The type of each entry (absolute pointer, a relative integer, a relative integer that is shifted).
Together this information can be used by debuggers and binary analysis tools to understand what an jump table indirect branch is doing and where it might jump to.
Documentation for the symbol can be found in the Microsoft PDB library dumper: 0fe89a942f/cvdump/dumpsym7.cpp (L5518)
This change adds support to LLVM to emit the `S_ARMSWITCHTABLE` debug symbol as well as to dump it out (for testing purposes).
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D149367
This reverts commit 8d0c3db388143f4e058b5f513a70fd5d089d51c3.
Causes crashes, see comments in https://reviews.llvm.org/D149367.
Some follow-up fixes are also reverted:
This reverts commit 636269f4fca44693bfd787b0a37bb0328ffcc085.
This reverts commit 5966079cf4d4de0285004eef051784d0d9f7a3a6.
This reverts commit e7294dbc85d24a08c716d9babbe7f68390cf219b.
The CodeView `S_ARMSWITCHTABLE` debug symbol is used to describe the layout of a jump table, it contains the following information:
* The address of the branch instruction that uses the jump table.
* The address of the jump table.
* The "base" address that the values in the jump table are relative to.
* The type of each entry (absolute pointer, a relative integer, a relative integer that is shifted).
Together this information can be used by debuggers and binary analysis tools to understand what an jump table indirect branch is doing and where it might jump to.
Documentation for the symbol can be found in the Microsoft PDB library dumper: 0fe89a942f/cvdump/dumpsym7.cpp (L5518)
This change adds support to LLVM to emit the `S_ARMSWITCHTABLE` debug symbol as well as to dump it out (for testing purposes).
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D149367
The pipeline state data captured in the PSV0 section of the DXContainer
file encodes signature elements which are read by the runtime to map
inputs and outputs from the GPU program.
This change adds support for generating and parsing signature elements
with testing driven through the ObjectYAML tooling.
Reviewed By: bogner
Differential Revision: https://reviews.llvm.org/D157671
Initially landed as 8c567e64f808f7a818965c6bc123fedf7db7336f, and
reverted in 4d800633b2683304a5431d002d8ffc40a1815520.
../llvm/include/llvm/BinaryFormat/DXContainerConstants.def
../llvm/test/ObjectYAML/DXContainer/PSVv1-amplification.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv1-compute.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv1-domain.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv1-geometry.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv1-vertex.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv2-amplification.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv2-compute.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv2-domain.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv2-geometry.yaml
../llvm/test/ObjectYAML/DXContainer/PSVv2-vertex.yaml
The pipeline state data captured in the PSV0 section of the DXContainer
file encodes signature elements which are read by the runtime to map
inputs and outputs from the GPU program.
This change adds support for generating and parsing signature elements
with testing driven through the ObjectYAML tooling.
Reviewed By: bogner
Differential Revision: https://reviews.llvm.org/D157671
There can be zero padding bytes at a section end for file alignment in
PECOFF. Exclude those padding bytes when reading the section data.
Differential Revision: https://reviews.llvm.org/D157059
Previously when objcopy generated section headers, it padded the LEB
that encodes the section size out to 5 bytes, matching the behavior of
clang. This is correct, but results in a binary that differs from the
input. This can sometimes have undesirable consequences (e.g. breaking
source maps).
This change makes the object reader remember the size of the LEB
encoding in the section header, so that llvm-objcopy can reproduce it
exactly. For sections not read from an object file (e.g. that
llvm-objcopy is adding itself), pad to 5 bytes.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D155535
When writing this initially I missed including the resource stride.
This change adds the resources stride to the serialized value.
I've also extended the testing and error reporting around parsing PSV
information. This adds tests to verify that the reader produces
meaningful error messages for malformed DXContainer files, and a test
that verifies the resource stride is respected in the reader even if
the stride isn't an expected or known value (as would happen if the
format changes in the future).
This is part of #59479.
Reviewed By: bogner, bob80905
Differential Revision: https://reviews.llvm.org/D155143
Use big obj copy in range for-loop will call copy constructor every time,
which can be avoided by use ref instead.
Reviewed By: skan
Differential Revision: https://reviews.llvm.org/D150024
