Current approach doesn't work well in cases when multiple paths are predicted to be "cold". By "cold" paths I mean those containing "unreachable" instruction, call marked with 'cold' attribute and 'unwind' handler of 'invoke' instruction. The issue is that heuristics are applied one by one until the first match and essentially ignores relative hotness/coldness
of other paths.
New approach unifies processing of "cold" paths by assigning predefined absolute weight to each block estimated to be "cold". Then we propagate these weights up/down IR similarly to existing approach. And finally set up edge probabilities based on estimated block weights.
One important difference is how we propagate weight up. Existing approach propagates the same weight to all blocks that are post-dominated by a block with some "known" weight. This is useless at least because it always gives 50\50 distribution which is assumed by default anyway. Worse, it causes the algorithm to skip further heuristics and can miss setting more accurate probability. New algorithm propagates the weight up only to the blocks that dominates and post-dominated by a block with some "known" weight. In other words, those blocks that are either always executed or not executed together.
In addition new approach processes loops in an uniform way as well. Essentially loop exit edges are estimated as "cold" paths relative to back edges and should be considered uniformly with other coldness/hotness markers.
Reviewed By: yrouban
Differential Revision: https://reviews.llvm.org/D79485
Using the store rightmost vector element instructions to do vector
element extraction and store. The rightmost vector element on little
endian is the zeroth vector element, with these patterns that element
can be extracted and stored in one instruction for all vector types.
Differential Revision: https://reviews.llvm.org/D89195
On subtargets that have a red zone, we will copy the stack pointer to the base
pointer in the prologue prior to updating the stack pointer. There are no other
updates to the base pointer after that. This suggests that we should be able to
restore the stack pointer from the base pointer rather than loading it from the
back chain or adding the frame size back to either the stack pointer or the
frame pointer.
This came about because functions that call setjmp need to restore the SP from
the FP because the back chain might have been clobbered
(see https://reviews.llvm.org/D92906). However, if the stack is realigned, the
restored SP might be incorrect (which is what caused the failures in the two
ASan test cases).
This patch was tested quite extensivelly both with sanitizer runtimes and
general code.
Differential revision: https://reviews.llvm.org/D93327
Summary: Some constants can be handled with less instructions than our current results. And it seems our original approach is not very easy to extend. Therefore this patch proposes to materialize all 64-bit constants by enumerated patterns.
I traversed almost all constants to verified the functionality of these pattens. A traversed comparison of the number of instructions used by the original method and the new method has also been completed, where no degradation was caused by this patch. This patch also passed Bootstrap test and SPEC test.
Improvements of this patch are shown in llvm/test/CodeGen/PowerPC/constants-i64.ll
Reviewed By: steven.zhang, stefanp
Differential Revision: https://reviews.llvm.org/D92089
This patch does two things:
1: fix the typo that intrinsic mfvscr should be with no readmem property
2: since VSCR is not modeled yet, add has side effect for SAT bit clobber
intrinsics/instructions.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90807
The LD/STD likewise instruction are selected only when the alignment in
the load/store >= 4 to deal with the case that the offset might not be
known(i.e. relocations). That means we have to select the X-Form load
for %0 = load i64, i64* %arrayidx, align 2 In fact, we can still select
the D-Form load if the offset is known. So, we only query the load/store
alignment when we don't know if the offset is a multiple of 4.
Reviewed By: jji, Nemanjai
Differential Revision: https://reviews.llvm.org/D93099
Clean up a TODO, to support folding a shift of a constant by a
select of constants, on targets with different shift operand sizes.
Reviewed By: RKSimon, lebedev.ri
Differential Revision: https://reviews.llvm.org/D90349
On PPC, the vector pair instructions are independent from MMA.
This patch renames the vector pair LLVM intrinsics and Clang builtins to replace the _mma_ prefix by _vsx_ in their names.
We also move the vector pair type/intrinsic/builtin tests to their own files.
Differential Revision: https://reviews.llvm.org/D91974
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
SUMMARY:
In order for the runtime on AIX to find the compact unwind section(EHInfo table),
we would need to set the following on the traceback table:
The 6th byte's longtbtable field to true to signal there is an Extended TB Table Flag.
The Extended TB Table Flag to be 0x08 to signal there is an exception handling info presents.
Emit the offset between ehinfo TC entry and TOC base after all other optional portions of traceback table.
The patch is authored by Jason Liu.
Reviewers: David Tenty, Digger Lin
Differential Revision: https://reviews.llvm.org/D92766
This patch enables the Clang type __vector_pair and its associated LLVM
intrinsics even when MMA is disabled. With this patch, the type is now controlled
by the PPC paired-vector-memops option. The builtins and intrinsics will be
renamed to drop the mma prefix in another patch.
Differential Revision: https://reviews.llvm.org/D91819
If a function happens to:
- call setjmp
- do a 16-byte stack allocation
- call a function that sets up a stack frame and longjmp's back
The stack pointer that is restores by setjmp will no longer point to a valid
back chain. According to the ABI, stack accesses in such a function are to be
frame pointer based - so it is an error (quite obviously) to restore the stack
from the back chain.
We already restore the stack from the frame pointer when there are calls to
fast_cc functions. We just need to also do that when there are calls to setjmp.
This patch simply does that.
This was pointed out by the Julia team.
Differential revision: https://reviews.llvm.org/D92906
The runtime library has two family library implementation for ppc_fp128 and fp128.
For IBM Long double(ppc_fp128), it is suffixed with 'l', i.e(sqrtl). For
IEEE Long double(fp128), it is suffixed with "ieee128" or "f128".
We miss to map several libcall for IEEE Long double.
Reviewed By: qiucf
Differential Revision: https://reviews.llvm.org/D91675
Some of the pattern matching in PPCInstrVSX.td and node lowering involving vectors assumes 64bit mode. This patch disables some of the unsafe pattern matching and lowering of BUILD_VECTOR in 32bit mode.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D92789
SUMMARY:
1. added a new option -xcoff-traceback-table to control whether generate traceback table for function.
2. implement the functionality of emit traceback table of a function.
Reviewers: hubert.reinterpretcast, Jason Liu
Differential Revision: https://reviews.llvm.org/D92398
Weak functions can be replaced by other functions at link time. Previously it
was assumed that no matter what the weak callee function was replaced with it
would still share the same TOC as the caller. This is no longer true as a weak
callee with a TOC setup can be replaced by another function that was compiled
with PC Relative and does not have a TOC at all.
This patch makes sure that all calls to functions defined as weak from a caller
that has a valid TOC have a nop after the call to allow a place for the linker
to restore the TOC.
Reviewed By: NeHuang
Differential Revision: https://reviews.llvm.org/D91983
Instruction darn was introduced in ISA 3.0. It means 'Deliver A Random
Number'. The immediate number L means:
- L=0, the number is 32-bit (higher 32-bits are all-zero)
- L=1, the number is 'conditioned' (processed by hardware to reduce bias)
- L=2, the number is not conditioned, directly from noise source
GCC implements them in three separate intrinsics: __builtin_darn,
__builtin_darn_32 and __builtin_darn_raw. This patch implements the
same intrinsics. And this change also addresses Bugzilla PR39800.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92465
The xxeval instruction was intorduced in Power PC in Power 10.
The instruction accepts three vector registers and an immediate.
Depending on the value of the immediate the instruction can be used
to perform certain bitwise boolean operations (and, or, xor, ...) on
the given vector registers.
This patch implements the AND and NAND patterns that can be used by
the instruction.
Reviewed By: nemanjai, #powerpc, bsaleil, NeHuang, jsji
Differential Revision: https://reviews.llvm.org/D92420
Summary: This patch added support for the intrinsics llvm.ppc.dcbfps and llvm.ppc.dcbstps.
dcbfps and dcbstps are actually extended mnemonics of dcbf.
dcbfps RA,RB ---> dcbf RA,RB,4
dcbstps RA,RB ---> dcbf RA,RB,6
Reviewed By: amyk, steven.zhang
Differential Revision: https://reviews.llvm.org/D91323
A simple SELECT is used for converting i1 to floating types on ppc32,
but in constrained cases, the chain is not handled properly. This patch
will fix that.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92365
Move fold of (sext (not i1 x)) -> (add (zext i1 x), -1) from X86 to DAGCombiner to improve codegen on other targets.
Differential Revision: https://reviews.llvm.org/D91589
When using accumulators in loops, they are passed around in PHI nodes of unprimed
accumulators, causing the generation of additional prime/unprime instructions.
This patch detects these cases and changes these PHI nodes to primed accumulator
PHI nodes. We also add IR and MIR test cases for several PHI node cases.
Differential Revision: https://reviews.llvm.org/D91391
PowerPC ISA support the input test for vector type v4f32 and v2f64.
Replace the software compare with hw test will improve the perf.
Reviewed By: ChenZheng
Differential Revision: https://reviews.llvm.org/D90914
Summary:
Not all system assembler supports `.uleb128 label2 - label1` form.
When the target do not support this form, we have to take
alternative manual calculation to get the offsets from them.
Reviewed By: hubert.reinterpretcast
Diffierential Revision: https://reviews.llvm.org/D92058
Summary:
AIX uses the existing EH infrastructure in clang and llvm.
The major differences would be
1. AIX do not have CFI instructions.
2. AIX uses a new personality routine, named __xlcxx_personality_v1.
It doesn't use the GCC personality rountine, because the
interoperability is not there yet on AIX.
3. AIX do not use eh_frame sections. Instead, it would use a eh_info
section (compat unwind section) to store the information about
personality routine and LSDA data address.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D91455
In lowering of FLT_ROUNDS_, FPSCR content will be moved into FP register
and then GPR, and then truncated into word.
For subtargets without direct move support, it will store and then load.
The load address needs adjustment (+4) only on big-endian targets. This
patch fixes it on using generic opcodes on little-endian and subtargets
with direct-move.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D91845
i1 is the native type for PowerPC if crbits is enabled. However, we need
to promote the i1 to i64 as we didn't have the pattern for i1.
Reviewed By: Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D92067
This reverts commit cf1c774d6ace59c5adc9ab71b31e762c1be695b1.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694d32efa44242c099e923a7f4d982095.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30edccd9e175d92bddeefcfa544751b2.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf17a7dca0874ace7490cc3836fb063f.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee89dadb8798ca8ed19848f33f4551d5.
Move the X86 VSELECT->UADDSAT fold to DAGCombiner - there's nothing target specific about these folds.
The SSE42 test diffs are relatively benign - its avoiding an extra constant load in exchange for an extra xor operation - there are extra register moves, which is annoying as all those operations should commute them away.
Differential Revision: https://reviews.llvm.org/D91876
For now, we will hardcode the result as 0.0 if the input is denormal or 0. That will
have the impact the precision. As the fsqrt added belong to the cold path of the
cmp+branch, it won't impact the performance for normal inputs for PowerPC, but improve
the precision if the input is denormal.
Reviewed By: Spatel
Differential Revision: https://reviews.llvm.org/D80974
This patch enables passing non variadic vector type parameters on the caller and callee side and vector return on AIX that are passed in vector registers only.
So far, support is enabled for only the AIX extended Altivec ABI Calling convention.
Reviewed By: sfertile, DiggerLin
Differential Revision: https://reviews.llvm.org/D86476
We currently don't match this which limits the effectiveness of D91120 until
InstCombine starts canonicalizing to llvm.abs. This should be easy to remove
if/when we remove the SPF_ABS handling.
Differential Revision: https://reviews.llvm.org/D92118
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
During reviewing https://reviews.llvm.org/D84419, @efriedma mentioned the gap between realigned stack pointer and origin stack pointer should be probed too whatever the alignment is. This patch fixes the issue for PPC64.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D88078
PowerPC has instruction ftsqrt/xstsqrtdp etc to do the input test for software square root.
LLVM now tests it with smallest normalized value using abs + setcc. We should add hook to
target that has test instructions.
Reviewed By: Spatel, Chen Zheng, Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D80706
