This patch transforms the sequence
lea (reg1, reg2), reg3
sub reg3, reg4
to two sub instructions
sub reg1, reg4
sub reg2, reg4
Similar optimization can also be applied to LEA/ADD sequence.
The modifications to TwoAddressInstructionPass is to ensure the operands of ADD
instruction has expected order (the dest register of LEA should be src register of ADD).
Differential Revision: https://reviews.llvm.org/D101970
This guarantees they meet this overlap exception:
"The destination EEW is smaller than the source EEW and the overlap
is in the lowest-numbered part of the source register group"
Being a single register guarantees the overlap is always in the
lowerst-number part of the group.
Reviewed By: frasercrmck, khchen
Differential Revision: https://reviews.llvm.org/D103351
Compares are considered a narrowing operation for register overlap.
I believe for LMUL<=1 they meet this exception to allow overlap
"The destination EEW is smaller than the source EEW and the overlap is in the
lowest-numbered part of the source register group"
Both the result and the sources will occupy a single register for
LMUL<=1 so the overlap would always be in the "lowest-numbered part".
Reviewed By: frasercrmck, HsiangKai
Differential Revision: https://reviews.llvm.org/D103336
This patch extends the RISC-V lowering of the 'fastcc' calling
convention to vector types, both fixed-length and scalable. Without this
patch, any function passing or returning vector types by value would
throw a compiler error.
Vectors are handled in 'fastcc' much as they are in the default calling
convention, the noticeable difference being the extended set of scalar
GPR registers that can be used to pass vectors indirectly.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D102505
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
Currently, X86 backend only has a global one-size-fits-all `FeatureFastVariableShuffle` feature,
which controls profitability of both the cross-lane and per-lane variable shuffles.
I guess, this has been fine so far.
But at least on AMD Zen 3, while per-line variable shuffles (e.g. `VPSHUFB`)
are as fast as as shuffles with fixed/immediate mask,
while lane-crossing shuffles, e.g. `VPERMPS` is performing worse.
So to get the benefits of variable-mask shuffles, but not the drawbacks of lane-crossing shuffles,
as suggested by @RKSimon, split the feature flag into two.
Differential Revision: https://reviews.llvm.org/D103274
The test CodeGen/PowerPC/vector-constrained-fp-intrinsics.ll checks code
generation for constrained floating point intrinsics. Many test cases in
it were implemented using operations on constants. Constant folding of
constrained intrinsics would make these test cases almost useless,
because they would check only constant loading.
To keep the tests useful, operations on constants were replaced with
operations on function parameters.
Differential Revision: https://reviews.llvm.org/D103259
The code gen for f32 to i32 bitcast is not currently the most efficient;
this patch removes some unneccessary instructions gerneated.
Differential revision: https://reviews.llvm.org/D100782
It breaks up the function pass manager in the codegen pipeline.
With empty parameters, it looks at the -mllvm flag -rewrite-map-file.
This is likely not in use.
Add a check that we only have one function pass manager in the codegen
pipeline.
Some tests relied on the fact that we had a module pass somewhere in the
codegen pipeline.
addr-label.ll crashes on ARM due to this change. This is because a
ARMConstantPoolConstant containing a BasicBlock to represent a
blockaddress may hold an invalid pointer to a BasicBlock if the
blockaddress is invalidated by its BasicBlock getting removed. In that
case all referencing blockaddresses are RAUW a constant int. Making
ARMConstantPoolConstant::CVal a WeakVH fixes the crash, but I'm not sure
that's the right fix. As a workaround, create a barrier right before
ISel so that IR optimizations can't happen while a
ARMConstantPoolConstant has been created.
Reviewed By: rnk, MaskRay, compnerd
Differential Revision: https://reviews.llvm.org/D99707
I accidentaly pushed a draft of D103280 that was discussed
during the review, but it was not supposed to be the final
version.
Rather than revert and recommit, I'm updating the existing
code. This way we have a record of the codegen diff that
would result if we decide to remove this predicate in the
future.
sext (vsetcc X, Y) --> vsetcc (zext X), (zext Y) --
(when the zexts are free and a bunch of other conditions)
We have a couple of similar folds to this already for vector selects,
but this pattern slips through because it is only a setcc.
The tests are based on the motivating case from:
https://llvm.org/PR50055
...but we need extra logic to get that example, so I've left that as
a TODO for now.
Differential Revision: https://reviews.llvm.org/D103280
The D35953, D62650 and D73691 introduced trimming of variables locations
in LiveDebugVariables pass, since there are some cases where after
the virtregrewrite we have exploded number of DBG_VALUEs created for some
inlined variables. As it looks, all problematic cases were regarding
inlined variables, so it seems reasonable to stop trimming the location
ranges for non-inlined variables.
It has very good impact on the llvm-locstats report.
Differential Revision: https://reviews.llvm.org/D102917
This patch fixes a bug in lowering scalable-vector types in RISC-V's
main calling convention. When scalable-vector types are split and passed
indirectly, the target is responsible for scaling the offset --
initially set to the known-minimum store size -- by the scalable factor.
Before this we were issuing overlapping loads or stores to the different
parts, leading to incorrect codegen.
Credit to @HsiangKai for spotting this.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D103262
DSE will currently only remove stores in the same block unless they can
be guaranteed to be loop invariant. This expands that to any stores that
are in the same Loop, at the same loop level. This should still account
for where AA/MSSA will not handle aliasing between loops, but allow the
dead stores to be removed where they overlap in the same loop iteration.
It requires adding loop info to DSE, but that looks fairly harmless.
The test case this helps is from code like this, which can come up in
certain matrix operations:
for(i=..)
dst[i] = 0;
for(j=..)
dst[i] += src[i*n+j];
After LICM, this becomes:
for(i=..)
dst[i] = 0;
sum = 0;
for(j=..)
sum += src[i*n+j];
dst[i] = sum;
The first store is dead, and with this patch is now removed.
Differntial Revision: https://reviews.llvm.org/D100464
This patch custom lowers FP_TO_[US]INT and [US]INT_TO_FP conversions
between floating-point and boolean vectors. As the default action is
scalarization, this patch both supports scalable-vector conversions and
improves the code generation for fixed-length vectors.
The lowering for these conversions can piggy-back on the existing
lowering, which lowers the operations to a supported narrowing/widening
conversion and then either an extension or truncation.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103312
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This ensures that the operands of any gather/scatter instructions that
we attempt to push out of the loop are invariant, preventing invalid IR
from being generated.
extractelement is poison if the index is out-of-bounds, so just
scalarizing the load may introduce an out-of-bounds load, which is UB.
To avoid introducing new UB, we can mask the index so it only contains
valid indices.
Fixes PR50382.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D103077
If the operand of the WhileLoopStart is flagged as killed, that
currently gets propogated to both the t2CMPri as the instruction is
reverted, and the newly created t2DoLoopStart. Only the second should
remain as killing the operand, the first dropping the flags.
Follow the same strategy used for atomic loads/stores by converting the operands to equally-sized integer types.
This change prevents the atomic expansion pass from generating illegal LL/SC pairs when targeting AArch64: `expand-atomicrmw-xchg-fp.ll` would previously instantiate intrinsics such as `llvm.aarch64.ldaxr.p0f32` that cannot be lowered.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D103232
We have special handling for a zext of a load <32b because the load does a zext
for free. In that case, we just select the G_ZEXT as if it were a copy but this
triggered the copy checking code to balk at the mismatched size.
This was being hidden because normally these get combined into G_ZEXTLOAD but
for atomics this doesn't happen. The test case here just uses a normal load
because the particular atomic isn't supported yet anyway.
If a cmpxchg specifies acquire or seq_cst on failure, make sure we
generate code consistent with that ordering even if the success ordering
is not acquire/seq_cst.
At one point, it was ambiguous whether this sort of construct was valid,
but the C++ standad and LLVM now accept arbitrary combinations of
success/failure orderings.
This doesn't address the corresponding issue in AtomicExpand. (This was
reported as https://bugs.llvm.org/show_bug.cgi?id=33332 .)
Fixes https://bugs.llvm.org/show_bug.cgi?id=50512.
Differential Revision: https://reviews.llvm.org/D103284
These fixed-length versions don't crash unlike the corresponding
scalable ones, but the code generation is scalarized. An imminent patch
will support scalable-vector conversions and improve the codegen for
these fixed-length conversions.
SwiftTailCC has a different set of requirements than the C calling convention
for a tail call. The exact argument sequence doesn't have to match, but fewer
ABI-affecting attributes are allowed.
Also make sure the musttail diagnostic triggers if a musttail call isn't
actually a tail call.
When flat scratch is used, the stack pointer needs to be added when
writing arguments to the stack.
For buffer instructions, this is done in SelectMUBUFScratchOffen
and SelectMUBUFScratchOffset.
Move that to call argument lowering, like it is done in GlobalISel.
Differential Revision: https://reviews.llvm.org/D103166
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
Also changes the fewerElements helper to use the lookthrough constant helper
instead of m_ICst, since m_ICst doesn't look through extends.
Differential Revision: https://reviews.llvm.org/D103227
AIX use `__ssp_canary_word` instead of `__stack_chk_guard`.
This patch update the target hook to use correct symbol,
so that the basic stackprotect feature can work.
The traceback will be handled in follow up patch.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D103100
If an instruction's AVL operand is a PHI node in the same block,
we may be able to peek through the PHI to find vsetvli instructions
that produce the AVL in other basic blocks. If we can prove those
vsetvli instructions have the same VTYPE and were the last vsetvli
in their respective blocks, then we don't need to insert a vsetvli
for this pseudo instruction.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D103277
This is the first in a series of patches to provide builtins for
compatibility with the XL compiler. Most of the builtins already had
intrinsics and only needed to be implemented in the front end.
Intrinsics were created for the three iospace builtins, eieio, and icbt.
Pseudo instructions were created for eieio and iospace_eieio to
ensure that nops were inserted before the eieio instruction.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D102443
Now that i've reimplemented the testcase generator
to produce actual IR (https://godbolt.org/z/s7PM8E6v9),
it turns out that this was the only discrepancy
from what the LV would produce.
