1) Overloaded (instruction-based) method is a wrapper around the current (opcode-based) method.
2) This patch also changes a few callsites (VectorCombine.cpp,
SLPVectorizer.cpp, CodeGenPrepare.cpp) to call the overloaded method.
3) This is a split of D128302.
Differential Revision: https://reviews.llvm.org/D131114
We currently assert in vectorizeTree(TreeEntry*) when processing a PHI
bundle in a block containing a catchswitch. We attempt to set the
IRBuilder insertion point following the catchswitch, which is invalid.
This is done so that ShuffleBuilder.finalize() knows where to insert
a shuffle if one is needed.
To avoid this occurring, watch out for catchswitch blocks during
buildTree_rec() processing, and avoid adding PHIs in such blocks to
the vectorizable tree. It is unlikely that constraining vectorization
over an exception path will cause a noticeable performance loss, so
this seems preferable to trying to anticipate when a shuffle will and
will not be required.
This patch slightly extends the limit on the RecursionMaxDepth inside
the SLP vectorizer. It does it only when it hits a load (or zext/sext of
a load), which allows it to peek through in the places where it will be
the most valuable, without ballooning out the O(..) by any 2^n factors.
Differential Revision: https://reviews.llvm.org/D122148
If the root order itself does not require reordering, we can just
remove its reorder mask safely (e.g., if the root node is a vector of
phis). But if this node is used as an operand in the graph, we cannot
delete the reordering, need to keep it. Otherwise the graph nodes are
not synchronized with the operands. It may cause an extra gather
instruction(s) or a compiler crash.
Also, need to be very careful when selecting the gather nodes for
reordering since there might several gather nodes with the same scalars
and we can try to reorder just the same node many times instead of
different nodes.
Differential Revision: https://reviews.llvm.org/D128680
`commonAlignment` is a shortcut to pick the smallest of two `Align`
objects. As-is it doesn't bring much value compared to `std::min`.
Differential Revision: https://reviews.llvm.org/D128345
Improved/fixed cost modeling for shuffles by providing masks, improved
cost model for non-identity insertelements.
Differential Revision: https://reviews.llvm.org/D115462
If the masked gather nodes must be reordered, we can just reorder
scalars, just like for gather nodes. But if the node contains reused
scalars, it must be handled same way as a regular vectorizable node,
since need to reorder reused mask, not the scalars directly.
Differential Revision: https://reviews.llvm.org/D128360
This reverts commit cac60940b771a0685d058a5b471c84cea05fdc46.
Caused -Os -fsanitize=memory -march=haswell miscompile to pytorch/cpuinfo.
See my latest comment (may update) on D115462.
This reverts commit f1ee2738b3d70fea803ac1f3401c2fc9f61e514a.
Revert due to the revert of a dependent commit `[SLP]Improve shuffles cost estimation where possible.`
During the reordering transformation we should try to avoid reordering bundles
like fadd,fsub because this may block them being matched into a single vector
instruction in x86.
We do this by checking if a TreeEntry is such a pattern and adding it to the
list of TreeEntries with orders that need to be considered.
Differential Revision: https://reviews.llvm.org/D125712
If the OffsetBeg + InsertVecSz is greater than VecSz, need to estimate
the cost as shuffle of 2 vector, not as insert of subvector. Otherwise,
the inserted subvector is out of range and compiler may crash.
Differential Revision: https://reviews.llvm.org/D128071
If the root scalar is mapped to to the smallest bit width, the vector is
truncated and the types between original buildvector and extracted value
mismatched. For extract, we emit sext/zext instructions, for shuffles we
can reuse oringal vector instead of the truncated one.
Differential Revision: https://reviews.llvm.org/D127974
Currently scatter vectorize nodes can be emitted only for GEPs with
constant indices. But we can also emit such nodes for GEPs with the same
ptr and non-constant vectorizable/gathered indices, if profitable. Patch
adds support for such nodes and tries to improve handling of GEPs with
non-const indeces for such nodes.
Metric: SLP.NumVectorInstructions
Program SLP.NumVectorInstructions
results results0 diff
test-suite :: External/SPEC/CFP2017speed/638.imagick_s/638.imagick_s.test 5243.00 5240.00 -0.1%
test-suite :: External/SPEC/CFP2017rate/538.imagick_r/538.imagick_r.test 5243.00 5240.00 -0.1%
test-suite :: External/SPEC/CFP2017rate/526.blender_r/526.blender_r.test 27550.00 27507.00 -0.2%
test-suite :: External/SPEC/CFP2006/453.povray/453.povray.test 5395.00 5380.00 -0.3%
test-suite :: External/SPEC/CFP2017rate/511.povray_r/511.povray_r.test 5389.00 5374.00 -0.3%
test-suite :: External/SPEC/CINT2017rate/520.omnetpp_r/520.omnetpp_r.test 961.00 958.00 -0.3%
test-suite :: External/SPEC/CINT2017speed/620.omnetpp_s/620.omnetpp_s.test 961.00 958.00 -0.3%
test-suite :: External/SPEC/CFP2006/447.dealII/447.dealII.test 5664.00 5643.00 -0.4%
test-suite :: External/SPEC/CFP2017rate/510.parest_r/510.parest_r.test 13202.00 13127.00 -0.6%
test-suite :: External/SPEC/CINT2006/445.gobmk/445.gobmk.test 212.00 207.00 -2.4%
test-suite :: MultiSource/Benchmarks/7zip/7zip-benchmark.test 890.00 850.00 -4.5%
test-suite :: External/SPEC/CINT2006/464.h264ref/464.h264ref.test 1695.00 1581.00 -6.7%
test-suite :: MultiSource/Applications/JM/lencod/lencod.test 2338.00 2140.00 -8.5%
test-suite :: SingleSource/UnitTests/matrix-types-spec.test 63.00 55.00 -12.7%
test-suite :: SingleSource/Benchmarks/Adobe-C++/loop_unroll.test 468.00 356.00 -23.9%
Geomean difference -0.3%
All numbers show increased number of generated vector instructions.
Diff:
SingleSource/Benchmarks/Adobe-C++/loop_unroll - better without LTO, but
need an extra analysis with LTO (with LTO compiler generates
masked_gather, while before regular loads were emitted because of extra
data, availbale at LTO time).
SingleSource/UnitTests/matrix-types-spec - more vector code.
MultiSource/Applications/JM/lencod/lencod - same.
External/SPEC/CINT2006/464.h264ref/464.h264ref - same.
MultiSource/Benchmarks/7zip/7zip-benchmark - same.
External/SPEC/CINT2006/445.gobmk/445.gobmk - no changes.
External/SPEC/CFP2017rate/510.parest_r/510.parest_r - more vector code.
External/SPEC/CFP2006/447.dealII/447.dealII - same
External/SPEC/CINT2017speed/620.omnetpp_s/620.omnetpp_s - same
External/SPEC/CINT2017rate/520.omnetpp_r/520.omnetpp - same
External/SPEC/CFP2017rate/511.povray_r/511.povray - same
External/SPEC/CFP2006/453.povray/453.povray - same
External/SPEC/CFP2017rate/526.blender_r/526.blender_r - same
External/SPEC/CFP2017rate/538.imagick_r/538.imagick_r - same
External/SPEC/CFP2017speed/638.imagick_s/638.imagick_s - same
Differential Revision: https://reviews.llvm.org/D127219
We can skip the analysis of the constant nodes, their order should not
affect the ordering of the trees/subtrees.
Differential Revision: https://reviews.llvm.org/D127775
Improved/fixed cost modeling for shuffles by providing masks, improved
cost model for non-identity insertelements.
Differential Revision: https://reviews.llvm.org/D115462
Improved/fixed cost modeling for shuffles by providing masks, improved
cost model for non-identity insertelements.
Differential Revision: https://reviews.llvm.org/D115462
Improved/fixed cost modeling for shuffles by providing masks, improved
cost model for non-identity insertelements.
Differential Revision: https://reviews.llvm.org/D115462
Extractelement instructions may come from different basic blocks, need
to take it into account when looking for a last instruction in the
bundle to prevent compiler crash.
Differential Revision: https://reviews.llvm.org/D126777
Patch improves compile time. For function calls, which cannot be
vectorized, create a unique group for each such a call instead of
subgroup. It prevents them from being grouped by a subgroups and
attempts for their vectorization.
Also, looks through casts operand to try to check their
groups/subgroups.
Reduces number of vectorization attempts. No changes in the statistics
for SPEC2017/2006/llvm-test-suite.
Differential Revision: https://reviews.llvm.org/D126476
Need to handle a corner case correctly, if all elements are Undefs/Poisons,
need to emit actual values, not just poisons.
Differential Revision: https://reviews.llvm.org/D126298
ScatterVectorize nodes should be handled same way as gathers in
reorderBottomToTop function, since we can simple reorder the loads in
this node. Because of that need to include such nodes to the list of
gathered nodes to fix compiler crash.
Differential Revision: https://reviews.llvm.org/D126378
SLP should build ScatterVectorize nodes only if they actually end up
with masked gather rather than with scalarization. In the second
scenario better to build a gather node.
Differential Revision: https://reviews.llvm.org/D126379
Need to use all ReductionOps when propagating flags for the reduction
ops, otherwise transformation is not correct. Plus, need to drop nuw/nsw
flags.
Differential Revision: https://reviews.llvm.org/D126371
The crash is caused by incorrect order set by reorderBottomToTop(), which
happens when it is reordering a TreeEntry which has a user that has already been
reordered earlier. Please see the detailed description in the lit test.
Differential Revision: https://reviews.llvm.org/D126099
To be used correctly in a sort-like function, isFirstInsertElement
function must follow weak strict ordering rule, i.e.
isFirstInsertElement(IE1, IE1) should return false.
Builds UserIgnore list only once as a SmallDenseSet without rebuilding
it between the runs, iterate over gathers instead list of reduction ops,
do some checks in the buildTree_rec only if the corresponding containers
are not empty.
SLP vectorizer emits extracts for externally used vectorized scalars and
estimates the cost for each such extract. But in many cases these
scalars are input for insertelement instructions, forming buildvector,
and instead of extractelement/insertelement pair we can emit/cost
estimate shuffle(s) cost and generate series of shuffles, which can be
further optimized.
Tested using test-suite (+SPEC2017), the tests passed, SLP was able to
generate/vectorize more instructions in many cases and it allowed to reduce
number of re-vectorization attempts (where we could try to vectorize
buildector insertelements again and again).
Differential Revision: https://reviews.llvm.org/D107966
This reverts commit fc9c59c355cb255446e571b4515b5e41a76503c4.
The patch triggers an assertion when building SPEC on X86. Reduced
reproducer shared at D107966.
Also reverts follow-up commit 11a09af76d11ad5a9f1f95b561112af17ff81f80.
SLP vectorizer emits extracts for externally used vectorized scalars and
estimates the cost for each such extract. But in many cases these
scalars are input for insertelement instructions, forming buildvector,
and instead of extractelement/insertelement pair we can emit/cost
estimate shuffle(s) cost and generate series of shuffles, which can be
further optimized.
Tested using test-suite (+SPEC2017), the tests passed, SLP was able to
generate/vectorize more instructions in many cases and it allowed to reduce
number of re-vectorization attempts (where we could try to vectorize
buildector insertelements again and again).
Differential Revision: https://reviews.llvm.org/D107966
