While -g[no-]simple-template-names is a driver option, the fancier
-gsimple-template-names={simple,mangled} option is cc1-only, so code
to handle it in the driver is dead.
Differential Revision: https://reviews.llvm.org/D122503
Adds `--product-name=` flag to the clang driver. This gets forwarded to
cc1 only when we are performing a ExtractAPI Action. This is used to
populate the `name` field of the module object in the generated SymbolGraph.
Differential Revision: https://reviews.llvm.org/D122141
clang -extract-api should accept multiple headers and forward them to a
single CC1 instance. This change introduces a new ExtractAPIJobAction.
Currently API Extraction is done during the Precompile phase as this is
the current phase that matches the requirements the most. Adding a new
phase would need to change some logic in how phases are scheduled. If
the headers scheduled for API extraction are of different types the
driver emits a diagnostic.
Differential Revision: https://reviews.llvm.org/D121936
The NVPTX toolchain uses target features to determine the PTX version to
use. However this isn't exposed externally like most other toolchain
specific target features are. Add this functionaliy in preparation for
using it in for OpenMP offloading.
Reviewed By: jdoerfert, tra
Differential Revision: https://reviews.llvm.org/D122089
This patch adds the offload kind to the embedded section name in
preparation for offloading to different kinda like CUDA or HIP.
Depends on D120288
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D120271
This relands commit 731347431976509823e38329a96fcbc69fe98cd2.
It failed on Windows/Mac because `-fjmc` is only checked for ELF targets.
Check the flag unconditionally instead and issue a warning for non-ELF targets.
The motivation is to enable the MSVC-style JMC instrumentation usable by a ELF-based
debugger. Since there is no prior experience implementing JMC feature for ELF-based
debugger, it might be better to just reuse existing MSVC-style JMC instrumentation.
For debuggers that support both ELF&COFF (like lldb), the JMC implementation might
be shared between ELF&COFF. If this is found to inadequate, it is pretty low-cost
switching to alternatives.
Implementation:
- The '-fjmc' is already a driver and cc1 flag. Wire it up for ELF in the driver.
- Refactor the JMC instrumentation pass a little bit.
- The ELF handling is different from MSVC in two places:
* the flag section name is ".just.my.code" instead of ".msvcjmc"
* the way default function is provided: MSVC uses /alternatename; ELF uses weak function.
Based on D118428.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D119910
This new flag enables `__has_feature(cxx_unstable)` that would replace libc++ macros for individual unstable/experimental features, e.g. `_LIBCPP_HAS_NO_INCOMPLETE_RANGES` or `_LIBCPP_HAS_NO_INCOMPLETE_FORMAT`.
This would make it easier and more convenient to opt-in into all libc++ unstable features at once.
Differential Revision: https://reviews.llvm.org/D120160
Introduce -fgpu-default-stream={legacy|per-thread} option to
support per-thread default stream for HIP runtime.
When -fgpu-default-stream=per-thread, HIP kernels are
launched through hipLaunchKernel_spt instead of
hipLaunchKernel. Also HIP_API_PER_THREAD_DEFAULT_STREAM=1
is defined by the preprocessor to enable other per-thread stream
API's.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D120298
Currently when we generate OpenMP offloading code we always make
fallback code for the CPU. This is necessary for implementing features
like conditional offloading and ensuring that unhandled pragmas don't
result in missing symbols. However, this is problematic for a few cases.
For offloading tests we can silently fail to the host without realizing
that offloading failed. Additionally, this makes it impossible to
provide interoperabiility to other offloading schemes like HIP or CUDA
because those methods do not provide any such host fallback guaruntee.
this patch adds the `-fopenmp-offload-mandatory` flag to prevent
generating the fallback symbol on the CPU and instead replaces the
function with a dummy global and the failed branch with 'unreachable'.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D120353
The runtime uses thread state values to indicate when we use an ICV or
are in nested parallelism. This is done for OpenMP correctness, but it
not needed in the majority of cases. The new flag added is
`-fopenmp-assume-no-thread-state`.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D120106
This patch passes in the AMDPGU math libraries to the linker wrapper.
The wrapper already handles linking OpenMP bitcode libraries via the
`--target-library` option. This should be sufficient to link in math
libraries for the accompanying architecture.
Fixes#53526.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D119841
This patch passes in the AMDPGU math libraries to the linker wrapper.
The wrapper already handles linking OpenMP bitcode libraries via the
`--target-library` option. This should be sufficient to link in math
libraries for the accompanying architecture.
Fixes#53526.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D119841
This patch adds a new Darwin clang driver environment variable in the
spirit of RC_DEBUG_OPTIONS, called RC_DEBUG_PREFIX_MAP, which allows a
meta build tool to add one additional -fdebug-prefix-map entry without
the knowledge of the build system.
rdar://85224675
Differential Revision: https://reviews.llvm.org/D119850
This patch adds support for linking CPU offloading applications in the
linker wrapper. We generate the necessary linking job using the host
linker's path and library arguments. This may not be true for more
complex offloading schemes, but this is sufficient for now.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D119613
Now that the old device runtime has been deleted there is only a single
target that differs by the triple and the architecture. Simplify the
scheme for identifying the library but directly using the triple.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D119638
This relands commit b380a31de084a540cfa38b72e609b25ea0569bb7.
Restrict the tests to Windows only since the flag symbol hash depends on
system-dependent path normalization.
The introduction and some examples are on this page:
https://devblogs.microsoft.com/cppblog/announcing-jmc-stepping-in-visual-studio/
The `/JMC` flag enables these instrumentations:
- Insert at the beginning of every function immediately after the prologue with
a call to `void __fastcall __CheckForDebuggerJustMyCode(unsigned char *JMC_flag)`.
The argument for `__CheckForDebuggerJustMyCode` is the address of a boolean
global variable (the global variable is initialized to 1) with the name
convention `__<hash>_<filename>`. All such global variables are placed in
the `.msvcjmc` section.
- The `<hash>` part of `__<hash>_<filename>` has a one-to-one mapping
with a directory path. MSVC uses some unknown hashing function. Here I
used DJB.
- Add a dummy/empty COMDAT function `__JustMyCode_Default`.
- Add `/alternatename:__CheckForDebuggerJustMyCode=__JustMyCode_Default` link
option via ".drectve" section. This is to prevent failure in
case `__CheckForDebuggerJustMyCode` is not provided during linking.
Implementation:
All the instrumentations are implemented in an IR codegen pass. The pass is placed immediately before CodeGenPrepare pass. This is to not interfere with mid-end optimizations and make the instrumentation target-independent (I'm still working on an ELF port in a separate patch).
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D118428
code object version determines ABI, therefore should not be mixed.
This patch emits amdgpu_code_object_version module flag in LLVM IR
based on code object version (default 4).
The amdgpu_code_object_version value is code object version times 100.
LLVM IR with different amdgpu_code_object_version module flag cannot
be linked.
The -cc1 option -mcode-object-version=none is for ROCm device library use
only, which supports multiple ABI.
Reviewed by: Artem Belevich
Differential Revision: https://reviews.llvm.org/D119026
The "-fzero-call-used-regs" option tells the compiler to zero out
certain registers before the function returns. It's also available as a
function attribute: zero_call_used_regs.
The two upper categories are:
- "used": Zero out used registers.
- "all": Zero out all registers, whether used or not.
The individual options are:
- "skip": Don't zero out any registers. This is the default.
- "used": Zero out all used registers.
- "used-arg": Zero out used registers that are used for arguments.
- "used-gpr": Zero out used registers that are GPRs.
- "used-gpr-arg": Zero out used GPRs that are used as arguments.
- "all": Zero out all registers.
- "all-arg": Zero out all registers used for arguments.
- "all-gpr": Zero out all GPRs.
- "all-gpr-arg": Zero out all GPRs used for arguments.
This is used to help mitigate Return-Oriented Programming exploits.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D110869
The original warning added in D115501 when pacbti is used with an
incompatible architecture was not exactly correct because it was
not really ignored and can affect codegen.
Therefore reword to say that the pacbti option is incompatible with
the given architecture.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D119166
AArch32/Armv8A introduced the performance deprecation of certain patterns
of IT instructions. After some debate internal to ARM, this is now being
reverted; i.e. no IT instruction patterns are performance deprecated
anymore, as the perfomance degredation is not significant enough.
This reverts the following:
"ARMv8-A deprecates some uses of the T32 IT instruction. All uses of
IT that apply to instructions other than a single subsequent 16-bit
instruction from a restricted set are deprecated, as are explicit
references to the PC within that single 16-bit instruction. This permits
the non-deprecated forms of IT and subsequent instructions to be treated
as a single 32-bit conditional instruction."
The deprecation no longer applies, but the behaviour may be controlled
by the -arm-restrict-it and -arm-no-restrict-it command-line options,
with the latter being the default. No warnings about complex IT blocks
will be generated.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D118044
This patch completely removes the old OpenMP device runtime. Previously,
the old runtime had the prefix `libomptarget-new-` and the old runtime
was simply called `libomptarget-`. This patch makes the formerly new
runtime the only runtime available. The entire project has been deleted,
and all references to the `libomptarget-new` runtime has been replaced
with `libomptarget-`.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D118934
The linker wrapper tool uses the 'nvlink' and 'ptxas' binaries to link
and assemble device files. Previously we searched for this using the
binaries in the user's path. This didn't work in cases where the user
passed in a specific Cuda path to Clang. This patch changes the linker
wrapper to accept an argument for the Cuda path we can get from Clang.
This should fix#53573.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D118944
Summary:
This patch implements the `-save-temps` flag for the linker wrapper.
This allows the user to inspect the intermeditary outpout that the
linker wrapper creates.
This patch adds support for a few extra flags in the linker wrapper,
such as debugging flags, verbose output, and passing arguments to ptxas. We also
now forward pass remarks to the LLVM backend so they will show up in the LTO
passes.
Depends on D117049
Differential Revision: https://reviews.llvm.org/D117156
Summary;
This patch adds support for embedding device images in the linker
wrapper tool. This will be used for performing JIT functionality in the
future.
Depends on D117048
Differential Revision: https://reviews.llvm.org/D117049
Summary:
This patch adds support for linking the OpenMP device bitcode library
late when doing LTO. This simply passes it in as an additional device
file when doing the final device linking phase with LTO. This has the
advantage that we don't link it multiple times, and the device
references do not get inlined and prevent us from doing needed OpenMP
optimizations when we have visiblity of the whole module.
Fix some failings where the implicit conversion of an Error to an
Expected triggered the deleted copy constructor.
Depends on D116675
Differential revision: https://reviews.llvm.org/D117048
This patch implements the fist support for handling LTO in the
offloading pipeline. The flag `-foffload-lto` is used to control if
bitcode is embedded into the device. If bitcode is found in the device,
the extracted files will be sent to the LTO pipeline to be linked and
sent to the backend. This implementation does not separately link the
device bitcode libraries yet.
Depends on D116675
Differential Revision: https://reviews.llvm.org/D116975
This patch introduces a linker wrapper tool that allows us to preprocess
files before they are sent to the linker. This adds a dummy action and
job to the driver stage that builds the linker command as usual and then
replaces the command line with the wrapper tool.
Depends on D116543
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D116544
This patch adds support for embedding the device object files into the
host IR to create a fat binary. Each offloading file will be inserted
into a section with the following naming format
`.llvm.offloading.<triple>.<arch>.<filename>`.
Depends on D116542
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D116543
This patch introduces the `-fopenmp-new-driver` option which instructs
the compiler to use a new driver scheme for producing offloading code.
In this scheme we create a complete offloading object file and then pass
it as input to the host compilation phase. This will allow us to embed
the object code in the backend phase.
This is the start of a series of commits to rework the OpenMP offloading driver
pipeline. The goal of this is to simplify the steps required for creating an
offloading program. This patch changes the driver's configuration to simply pass
the device file back to the host as an input so it can be embedded as an LLVM IR
global during the backend, then simply passes that object file to the linker.
This driver implementation will currently create the following phases,
```
$ clang input.c -fopenmp -fopenmp-targets=nvptx64 -fopenmp-new-driver -ccc-print-phases
+- 0: input, "input.c", c, (host-openmp)
+- 1: preprocessor, {0}, cpp-output, (host-openmp)
+- 2: compiler, {1}, ir, (host-openmp)
| | +- 3: input, "input.c", c, (device-openmp)
| | +- 4: preprocessor, {3}, cpp-output, (device-openmp)
| |- 5: compiler, {4}, ir, (device-openmp)
| +- 6: offload, "host-openmp (x86_64-unknown-linux-gnu)" {2}, "device-openmp (nvptx64)" {5}, ir
| +- 7: backend, {6}, assembler, (device-openmp)
|- 8: assembler, {7}, object, (device-openmp)
+- 9: offload, "host-openmp (x86_64-unknown-linux-gnu)" {2}, "device-openmp (nvptx64)" {8}, ir
+- 10: backend, {9}, assembler, (host-openmp)
+- 11: assembler, {10}, object, (host-openmp)
12: clang-linker-wrapper, {11}, image, (host-openmp)
```
Which will map to the following bindings
```
# "x86_64-unknown-linux-gnu" - "clang", inputs: ["input.c"], output: "/tmp/input-bae62e.bc"
# "nvptx64" - "clang", inputs: ["input.c", "/tmp/input-bae62e.bc"], output: "/tmp/input-76784e.s"
# "nvptx64" - "NVPTX::Assembler", inputs: ["/tmp/input-76784e.s"], output: "/tmp/input-8f29db.o"
# "x86_64-unknown-linux-gnu" - "clang", inputs: ["/tmp/input-bae62e.bc", "/tmp/input-8f29db.o"], output: "/tmp/input-545450.o"
# "x86_64-unknown-linux-gnu" - "Offload::Linker", inputs: ["/tmp/input-545450.o"], output: "a.out"
```
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D116541
Branch protection in M-class is supported by
- Armv8.1-M.Main
- Armv8-M.Main
- Armv7-M
Attempting to enable this for other architectures, either by
command-line (e.g -mbranch-protection=bti) or by target attribute
in source code (e.g. __attribute__((target("branch-protection=..."))) )
will generate a warning.
In both cases function attributes related to branch protection will not
be emitted. Regardless of the warning, module level attributes related to
branch protection will be emitted when it is enabled via the command-line.
The following people also contributed to this patch:
- Victor Campos
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D115501
GCC added -gz=zlib-gnu in 2014 for -gz meaning change (.zdebug =>
SHF_COMPRESSED) and the legacy zlib-gnu hasn't gain adoption.
According to Debian Code Search (`gz=zlib-gnu`), no project uses -gz=zlib-gnu
(valgrind has a configure to use -gz=zlib). Any possible -gz=zlib-gnu user can
switch to -gz smoothly (supported by integrated assemblers for many years;
binutils 2.26).
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D117744
