It's still in use in a few places so we can't delete it yet but there's not
many at this point.
Differential Revision: https://reviews.llvm.org/D103352
This patch transforms the sequence
lea (reg1, reg2), reg3
sub reg3, reg4
to two sub instructions
sub reg1, reg4
sub reg2, reg4
Similar optimization can also be applied to LEA/ADD sequence.
The modifications to TwoAddressInstructionPass is to ensure the operands of ADD
instruction has expected order (the dest register of LEA should be src register of ADD).
Differential Revision: https://reviews.llvm.org/D101970
It breaks up the function pass manager in the codegen pipeline.
With empty parameters, it looks at the -mllvm flag -rewrite-map-file.
This is likely not in use.
Add a check that we only have one function pass manager in the codegen
pipeline.
Some tests relied on the fact that we had a module pass somewhere in the
codegen pipeline.
addr-label.ll crashes on ARM due to this change. This is because a
ARMConstantPoolConstant containing a BasicBlock to represent a
blockaddress may hold an invalid pointer to a BasicBlock if the
blockaddress is invalidated by its BasicBlock getting removed. In that
case all referencing blockaddresses are RAUW a constant int. Making
ARMConstantPoolConstant::CVal a WeakVH fixes the crash, but I'm not sure
that's the right fix. As a workaround, create a barrier right before
ISel so that IR optimizations can't happen while a
ARMConstantPoolConstant has been created.
Reviewed By: rnk, MaskRay, compnerd
Differential Revision: https://reviews.llvm.org/D99707
I accidentaly pushed a draft of D103280 that was discussed
during the review, but it was not supposed to be the final
version.
Rather than revert and recommit, I'm updating the existing
code. This way we have a record of the codegen diff that
would result if we decide to remove this predicate in the
future.
sext (vsetcc X, Y) --> vsetcc (zext X), (zext Y) --
(when the zexts are free and a bunch of other conditions)
We have a couple of similar folds to this already for vector selects,
but this pattern slips through because it is only a setcc.
The tests are based on the motivating case from:
https://llvm.org/PR50055
...but we need extra logic to get that example, so I've left that as
a TODO for now.
Differential Revision: https://reviews.llvm.org/D103280
The D35953, D62650 and D73691 introduced trimming of variables locations
in LiveDebugVariables pass, since there are some cases where after
the virtregrewrite we have exploded number of DBG_VALUEs created for some
inlined variables. As it looks, all problematic cases were regarding
inlined variables, so it seems reasonable to stop trimming the location
ranges for non-inlined variables.
It has very good impact on the llvm-locstats report.
Differential Revision: https://reviews.llvm.org/D102917
extractelement is poison if the index is out-of-bounds, so just
scalarizing the load may introduce an out-of-bounds load, which is UB.
To avoid introducing new UB, we can mask the index so it only contains
valid indices.
Fixes PR50382.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D103077
Using the proper API automatically sets `__stack_chk_guard` to `dso_local` if
`Reloc::Static`. This wasn't strictly necessary until recently when dso_local was
no longer implied by `TargetMachine::shouldAssumeDSOLocal` for
`__stack_chk_guard`. By using the proper API, we can avoid generating unnecessary
GOT relocations.
Reviewed By: vitalybuka
Differential Revision: https://reviews.llvm.org/D102646
Follow the same strategy used for atomic loads/stores by converting the operands to equally-sized integer types.
This change prevents the atomic expansion pass from generating illegal LL/SC pairs when targeting AArch64: `expand-atomicrmw-xchg-fp.ll` would previously instantiate intrinsics such as `llvm.aarch64.ldaxr.p0f32` that cannot be lowered.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D103232
If a cmpxchg specifies acquire or seq_cst on failure, make sure we
generate code consistent with that ordering even if the success ordering
is not acquire/seq_cst.
At one point, it was ambiguous whether this sort of construct was valid,
but the C++ standad and LLVM now accept arbitrary combinations of
success/failure orderings.
This doesn't address the corresponding issue in AtomicExpand. (This was
reported as https://bugs.llvm.org/show_bug.cgi?id=33332 .)
Fixes https://bugs.llvm.org/show_bug.cgi?id=50512.
Differential Revision: https://reviews.llvm.org/D103284
Parameter positions seem like they should be unsigned.
While there, make function names lowercase per coding standards.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D103224
SwiftTailCC has a different set of requirements than the C calling convention
for a tail call. The exact argument sequence doesn't have to match, but fewer
ABI-affecting attributes are allowed.
Also make sure the musttail diagnostic triggers if a musttail call isn't
actually a tail call.
Also changes the fewerElements helper to use the lookthrough constant helper
instead of m_ICst, since m_ICst doesn't look through extends.
Differential Revision: https://reviews.llvm.org/D103227
Adjusting the load register type is a widenScalar type action, not a
lowering. lowerLoad should be reserved for operations that change the
memory access size, such as unaligned load decomposition. With this
trying to adjust the register type, it was hard to avoid infinite
loops in the legalizer. Adds a bandaid to avoid regressing a few
AArch64 tests, but I'm not sure what the exact condition is and
there's probably a cleaner way to do this.
For AMDGPU this regresses handling of some cases for unaligned loads,
but the way this is currently working is a pretty ugly hack.
Breaks check-llvm on non-linux, see comments on https://reviews.llvm.org/D85085
This reverts commit caae570978c490a137921b9516162a382831209e
and follow-up commit 1546c52d971292ed4145b6d41aaca0d02229ebff.
This patch adds a way for the target to configure the type it uses for
the explicit vector length operands of VP SDNodes. The type must be a
legal integer type (there is still no target-independent legalization of
this operand) and must currently be at least as big as i32, the type
used by the IR intrinsics. An implicit zero-extension takes place on
targets which choose a larger type. All VP nodes should be created with
this type used for the EVL operand.
This allows 64-bit RISC-V to avoid custom legalization of all VP nodes,
keeping them in their target-independent form for that bit longer.
Reviewed By: simoll
Differential Revision: https://reviews.llvm.org/D103027
DAGCombine's `mergeStoresOfConstantsOrVecElts` optimization is told
whether it's to use vector types and also whether it's to issue a
truncating store. However, the truncating store code path assumes a
scalar integer `ConstantSDNode`, and when using vector types it creates
either a `BUILD_VECTOR` or `CONCAT_VECTORS` to store: neither of which
is a constant.
The `riscv64` target is able to expose a crash here because it switches
on both code paths at the same time. The `f32` is stored as `i32` which
must be promoted to `i64`, necessitating a truncating store.
It also decides later that it prefers a vector store of `v2f32`.
While vector truncating stores are legal, this combine is not able to
emit them. We also don't have a test case. This patch adds an assert to
catch this case more gracefully, and updates one of the caller functions
to the function to turn off the use of truncating stores when preferring
vectors.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103173
This patch extends the cases in which the legalizer is able to express
VSELECT in terms of XOR/AND/OR. When dealing with a VSELECT between
boolean vector types, the mask itself is an all-ones or all-ones value
of the operand type, so a 0/1 boolean type behaves identically to a 0/-1
type.
This greatly helps RISC-V which relies on expansion for these nodes. It
also allows scalable-vector bool VSELECTs to use the default expansion,
where before it would crash in SelectionDAG::UnrollVectorOp.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D103147
Thhis is a port from the DAG legalization. We're still missing some of the
canonicalizations of shuffles but it's a start.
Differential Revision: https://reviews.llvm.org/D102828
There were a bunch of lost debug location remarks that show up when legalizing
tail calls on AArch64.
This would happen because we drop the return in the block where we emit the
tail call. So, we end up dropping the debug location, which makes the
LostDebugLocObserver report a missing debug location.
Although it's *true* that we lose these debug locations, this isn't
a particularly useful remark. We expect to drop these debug locations when
emitting tail calls. Suppressing remarks in this case is preferable, since the
amount of noise could hide actual debug location related bugs.
To do this, I just plumbed the LostDebugLocObserver through the relevant
LegalizerHelper functions. This is the only case I can think of where we need
the LostDebugLocObserver in the LegalizerHelper. So, rather than storing it
in the LegalizerHelper proper and mucking around with the constructors, I
figured it'd be cleanest to take the simplest path for now.
This clears up ~20 noisy lost debug location remarks on CTMark in AArch64 at
-Os.
Differential Revision: https://reviews.llvm.org/D103128
This patch addresses multiple things:
1) It ensures that const_value is emitted when possible with basic block
sections.
2) It emits location lists such that the labels are always within the
section boundary.
3) It fixes a bug when the parameter is first used in a non-entry block
which is in a different section from the entry block.
Differential Revision: https://reviews.llvm.org/D85085
This patch introduces "DBG_PHI" instructions, a marker of where a PHI
instruction used to be, before PHI elimination. Under the instruction
referencing model, we want to know where every value in the function is
defined -- and a PHI, even if implicit, is such a place.
Just like instruction numbers, we can use this to identify a value to be
used as a variable value, but we don't need to know what instruction
defines that value, for example:
bb1:
DBG_PHI $rax, 1
[... more insts ... ]
bb2:
DBG_INSTR_REF 1, 0, !1234, !DIExpression()
This specifies that on entry to bb1, whatever value is in $rax is known
as value number one -- and the later DBG_INSTR_REF marks the position
where variable !1234 should take on value number one.
PHI locations are stored in MachineFunction for the duration of the
regalloc phase in the DebugPHIPositions map. The map is populated by
PHIElimination, and then flushed back into the instruction stream by
virtregrewriter. A small amount of maintenence is needed in
LiveDebugVariables to account for registers being split, but only for
individual positions, not for entire ranges of blocks.
Differential Revision: https://reviews.llvm.org/D86812
DwarfDebug unconditionally assumes for all call instructions the 0th
operand is the callee operand, which seems to be true for other targets,
but not for WebAssembly. This adds `TargetInstrInfo::getCallOperand`
method whose default implementation returns `getOperand(0)` and makes
WebAssembly overrides it to use its own utility method to get the callee
operand.
This also fixes an existing bug in `WebAssembly::getCalleeOp`, which was
uncovered by this CL.
Reviewed By: dschuff, djtodoro
Differential Revision: https://reviews.llvm.org/D102978
Support virtual, physical and tied i128 register operands in inline assembly.
i128 is on SystemZ not really supported and is not a legal type and generally
such a value will be split into two i64 parts. There are however some
instructions that require a pair of two GPR64 registers contained in the GR128
bit reg class, which is untyped.
For inline assmebly operands, it proved to be very cumbersome to first follow
the general behavior of splitting an i128 operand into two parts and then
later rebuild the INLINEASM MI to have one GR128 register. Instead, some
minor common code changes were made to SelectionDAGBUilder to only create one
GR128 register part to begin with. In particular:
- getNumRegisters() now has an optional parameter "RegisterVT" which is
passed by AddInlineAsmOperands() and GetRegistersForValue().
- The bitcasting in GetRegistersForValue is not performed if RegVT is
Untyped.
- The RC for a tied use in AddInlineAsmOperands() is now computed either from
the tied def (virtual register), or by getMinimalPhysRegClass() (physical
register).
- InstrEmitter.cpp:EmitCopyFromReg() has been fixed so that the register
class (DstRC) can also be computed for an illegal type.
In the SystemZ backend getNumRegisters(), splitValueIntoRegisterParts() and
joinRegisterPartsIntoValue() have been implemented to handle i128 operands.
Differential Revision: https://reviews.llvm.org/D100788
Review: Ulrich Weigand
Precursor to D100944. The logic for determining the unique ID had become
quite difficult to reason about, so I have factored this out into a
separate function.
Differential Revision: https://reviews.llvm.org/D102336
- When memory intrinsics, such as memcpy, the attached scoped AA
metadata is not passed down to the backend. As a result, the backend
cannot schedule relevant memory operations around them following that
hint. In this patch, SelectionDAG is enhanced to propagate that
metadata (scoped AA only) when they are lowered into loads and stores.
Differential Revision: https://reviews.llvm.org/D102215
The findLoopPreheader function will currently not find a preheader if it
branches to multiple different loop headers. This patch adds an option
to relax that, allowing ARMLowOverheadLoops to process more loops
successfully. This helps with WhileLoopStart setup instructions that can
branch/fallthrough to the low overhead loop and to branch to a separate
loop from the same preheader (but I don't believe it is possible for
both loops to be low overhead loops).
Differential Revision: https://reviews.llvm.org/D102747
This makes it possible for targets to define their own MCObjectFileInfo.
This MCObjectFileInfo is then used to determine things like section alignment.
This is a follow up to D101462 and prepares for the RISCV backend defining the
text section alignment depending on the enabled extensions.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101921
D29668 enabled to avoid a useless copy of the argument value into an alloca if the caller places it in memory (as it often happens on x86) by directly forwarding the pointer to it. This optimization is illegal if the type contains padding bytes: if a truncating store into the alloca is replaced the upper bits are filled with garbage and produce code misbehaving at runtime.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D102153
D88631 added initial support for:
- -mstack-protector-guard=
- -mstack-protector-guard-reg=
- -mstack-protector-guard-offset=
flags, and D100919 extended these to AArch64. Unfortunately, these flags
aren't retained for LTO. Make them module attributes rather than
TargetOptions.
Link: https://github.com/ClangBuiltLinux/linux/issues/1378
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D102742
SelectionDAG forces us to have a weird ABI for 16-bit values without
legal 16-bit operations, but currently GlobalISel bypasses this and
sometimes ends up using the gfx8+ ABI in some contexts. Make sure
we're testing the normal ABI to avoid a test change in a future patch.
This reapplies c0f3dfb9, which was reverted following the discovery of
crashes on linux kernel and chromium builds - these issues have since
been fixed, allowing this patch to re-land.
This reverts commit 4397b7095d640f9b9426c4d0135e999c5a1de1c5.
The function `reduceOperationWidth` helps to legalize a vector
operation either by narrowing its type or by scalarizing the
operation itself. It currently supports instructions with one result.
This patch, in addition allows the same for instructions with two
results (for instance, G_SDIVREM).
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D100725
Previously APFloat::convertToDouble may be called only for APFloats that
were built using double semantics. Other semantics like single precision
were not allowed although corresponding numbers could be converted to
double without loss of precision. The similar restriction applied to
APFloat::convertToFloat.
With this change any APFloat that can be precisely represented by double
can be handled with convertToDouble. Behavior of convertToFloat was
updated similarly. It make the conversion operations more convenient and
adds support for formats like half and bfloat.
Differential Revision: https://reviews.llvm.org/D102671
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Re-landed again after D102819 fixed PowerPC to correctly zero-extend all
of its atomics as it claimed to do, since the combination of that bug
and this optimisation caused buildbot regressions.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
This reverts commit 4bf69fb52b3c445ddcef5043c6b292efd14330e0.
This broke spec2k6/403.gcc under -global-isel. Details to follow once I've
reduced the problem.
The use of `SelectionDAG::getSplatValue` isn't guaranteed to return a
type-legal splat value as it may implicitly extract a vector element
from another shuffle. It is not permitted to introduce an illegal type
when lowering shuffles.
This patch addresses the crash by adding a boolean flag to
`getSplatValue`, defaulting to false, which when set will ensure a
type-legal return value. If it is unable to do that it will fail to
return a splat value.
I've been through the existing uses of `getSplatValue` in other targets
and was unable to find a need or test cases showing a need to update
their uses. In some cases, the call is made during `LegalizeVectorOps`
which may still produce illegal scalar types. In other situations, the
illegally-typed splat value may be quickly patched up to a legal type
(such as any-extending the returned `extract_vector_elt` up to a legal
type) before `LegalizeDAG` notices.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102687
Currently, variadic dbg.values (i.e. those using a DIArgList as part of
their location) are not handled properly by FastISel or GlobalISel, and
will produce invalid DBG_VALUE instructions if they encounter them. This
patch fixes this issue by emitting undef DBG_VALUE instructions for
variadic dbg.values, so that no incorrect instruction is produced and
any prior variable location is terminated.
This is simply a quick-fix to prevent errors; a correct implementation
should come later for these ISel pipelines to ensure that we do not drop
debug information unnecessarily.
Differential Revision: https://reviews.llvm.org/D102500
