This patch turns VPWidenSelectRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84682
Interfaces changed to take `ElementCount` as parameters:
* LoopVectorizationPlanner::buildVPlans
* LoopVectorizationPlanner::buildVPlansWithVPRecipes
* LoopVectorizationCostModel::selectVectorizationFactor
This patch is NFC for fixed-width vectors.
Reviewed By: dmgreen, ctetreau
Differential Revision: https://reviews.llvm.org/D90879
This patch turns VPWidenCall into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84681
This patch changes the type of Start, End in VFRange to be an ElementCount
instead of `unsigned`. This is done as preparation to make VPlans for
scalable vectors, but is otherwise NFC.
Reviewed By: dmgreen, fhahn, vkmr
Differential Revision: https://reviews.llvm.org/D90715
This reverts the revert commit 408c4408facc3a79ee4ff7e9983cc972f797e176.
This version of the patch includes a fix for a crash caused by
treating ICmp/FCmp constant expressions as instructions.
Original message:
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
This reverts the revert commit a1b53db32418cb6ed6f5b2054d15a22b5aa3aeb9.
This patch includes a fix for a reported issue, caused by
matchSelectPattern returning UMIN for selects of pointers in
some cases by looking to some connected casts.
For now, ensure integer instrinsics are only returned for selects of
ints or int vectors.
This reverts commit 19225704890632cd2552f41ada41600a20db1371.
This appears to cause a crash in the following example
a, b, c;
l() {
int e = a, f = l, g, h, i, j;
float *d = c, *k = b;
for (;;)
for (; g < f; g++) {
k[h] = d[i];
k[h - 1] = d[j];
h += e << 1;
i += e;
}
}
clang -cc1 -triple i386-unknown-linux-gnu -emit-obj -target-cpu pentium-m -O1 -vectorize-loops -vectorize-slp reduced.c
llvm::Type *llvm::Type::getWithNewBitWidth(unsigned int) const: Assertion `isIntOrIntVectorTy() && "Original type expected to be a vector of integers or a scalar integer."' failed.
As per the comment in VPRecipeBase, clients should not rely on
getVPRecipeID, as it may change in the future. It should only be used in
classof implementations. Use isa instead in getFirstNonPhi.
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
Reviewed By: dmgreen, RKSimon
Differential Revision: https://reviews.llvm.org/D90070
Some architectures do not have general vector select instructions (e.g.
AArch64). But some cmp/select patterns can be vectorized using other
instructions/intrinsics.
One example is using min/max instructions for certain patterns.
This patch updates the cost calculations for selects in the SLP
vectorizer to consider using min/max intrinsics.
This patch does not change SLP vectorizer's codegen itself to actually
generate those intrinsics, but relies on the backends to lower the
vector cmps & selects. This keeps things simple on the SLP side and
works well in practice for AArch64.
This exposes additional SLP vectorization opportunities in some
benchmarks on AArch64 (-O3 -flto).
Metric: SLP.NumVectorInstructions
Program base slp diff
test-suite...ications/JM/ldecod/ldecod.test 502.00 697.00 38.8%
test-suite...ications/JM/lencod/lencod.test 1023.00 1414.00 38.2%
test-suite...-typeset/consumer-typeset.test 56.00 65.00 16.1%
test-suite...6/464.h264ref/464.h264ref.test 804.00 822.00 2.2%
test-suite...006/453.povray/453.povray.test 3335.00 3357.00 0.7%
test-suite...CFP2000/177.mesa/177.mesa.test 2110.00 2121.00 0.5%
test-suite...:: External/Povray/povray.test 2378.00 2382.00 0.2%
Reviewed By: RKSimon, samparker
Differential Revision: https://reviews.llvm.org/D89969
These logically belong together since it's a base commit plus
followup fixes to less common build configurations.
The patches are:
Revert "CfgInterface: rename interface() to getInterface()"
This reverts commit a74fc481588fcea9317cbf1f6c5888a30c9edd2d.
Revert "Wrap CfgTraitsFor in namespace llvm to please GCC 5"
This reverts commit f2a06875b604c00cbe96e54363f4f5d28935d610.
Revert "Try to make GCC5 happy about the CfgTraits thing"
This reverts commit 03a5f7ce12e2111c8b7bc5a95cff4c51b516250f.
Revert "Introduce CfgTraits abstraction"
This reverts commit c0cdd22c72fab47a3c37b5a8401763995cadaa77.
The warning would fire when calling isDereferenceableAndAlignedInLoop
with a scalable load. Calling isDereferenceableAndAlignedInLoop with a
scalable load would result in the use of the now deprecated implicit
cast of TypeSize to uint64_t through the overloaded operator.
This patch fixes this issue by:
- no longer considering vector loads as candidates in
canVectorizeWithIfConvert. This doesn't make sense in the context of
identifying scalar loads to vectorize.
- making use of getFixedSize inside isDereferenceableAndAlignedInLoop --
this removes the dependency on the deprecated interface, and will
trigger an assertion error if the function is ever called with a
scalable type.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D89798
The CfgTraits abstraction simplfies writing algorithms that are
generic over the type of CFG, and enables writing such algorithms
as regular non-template code that operates on opaque references
to CFG blocks and values.
Implementations of CfgTraits provide operations on the concrete
CFG types, e.g. `IrCfgTraits::BlockRef` is `BasicBlock *`.
CfgInterface is an abstract base class which provides operations
on opaque types CfgBlockRef and CfgValueRef. Those opaque types
encapsulate a `void *`, but the meaning depends on the concrete
CFG type. For example, MachineCfgTraits -- for use with MachineIR
in SSA form -- encodes a Register inside CfgValueRef. Converting
between concrete references and opaque/generic ones is done by
CfgTraits::{fromGeneric,toGeneric}. Convenience methods
CfgTraits::{un}wrap{Iterator,Range} are available as well.
Writing algorithms in terms of CfgInterface adds some overhead
(virtual method calls, plus in same cases it removes the
opportunity to inline iterators), but can be much more convenient
since generic algorithms can be written as non-templates.
This patch adds implementations of CfgTraits for all CFGs on
which dominator trees are calculated, so that the dominator
tree can be ported to this machinery. Only IrCfgTraits (LLVM IR)
and MachineCfgTraits (Machine IR in SSA form) are complete, the
other implementations are limited to the absolute minimum
required to make the upcoming dominator tree changes work.
v5:
- fix MachineCfgTraits::blockdef_iterator and allow it to iterate over
the instructions in a bundle
- use MachineBasicBlock::printName
v6:
- implement predecessors/successors for all CfgTraits implementations
- fix error in unwrapRange
- rename toGeneric/fromGeneric into wrapRef/unwrapRef to have naming
that is consistent with {wrap,unwrap}{Iterator,Range}
- use getVRegDef instead of getUniqueVRegDef
v7:
- std::forward fix in wrapping_iterator
- fix typos
v8:
- cleanup operators on CfgOpaqueType
- address other review comments
Change-Id: Ia75f4f268fded33fca11218a7d578c9aec1f3f4d
Differential Revision: https://reviews.llvm.org/D83088
We can not bitcast pointers across different address spaces, and VectorCombine
should be careful when it attempts to find the original source of the loaded
data.
Differential Revision: https://reviews.llvm.org/D89577
This is an initial cleanup of the way LoopVersioning interacts with LAA.
Currently LoopVersioning has 2 ways of initializing things:
1. Passing LAI and passing UseLAIChecks = true
2. Passing UseLAIChecks = false, followed by calling setSCEVChecks and
setAliasChecks.
Both ways of initializing lead to the same result and the duplication
seems more complicated than necessary.
This patch removes the UseLAIChecks flag from the constructor and the
setSCEVChecks & setAliasChecks helpers and move initialization
exclusively to the constructor.
This simplifies things, by providing a single way to initialize
LoopVersioning and reducing duplication.
Reviewed By: Meinersbur, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84406
This reverts the revert commit 710aceb645e7dba4de7053eef2c616311b9163d4
and includes a fix for a memsan failure.
Original message:
This patch turns VPMemoryInstructionRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
LV fails with assertion checking that UF > 0. We already set UF to 1 if it is 0 except the case when IC > MaxInterleaveCount. The fix is to set UF to 1 for that case as well.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D87679
This patch turns VPMemoryInstructionRecipe into a VPValue and uses it
during VPlan construction and codegeneration instead of the plain IR
reference where possible.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D84680
I have introduced a new template PolySize class, where the template
parameter determines the type of quantity, i.e. for an element
count this is just an unsigned value. The ElementCount class is
now just a simple derivation of PolySize<unsigned>, whereas TypeSize
is more complicated because it still needs to contain the uint64_t
cast operator, since there are still many places in the code that
rely upon this implicit cast. As such the class also still needs
some of it's own operators.
I've tried to minimise the amount of code in the base PolySize
class, which led to a couple of changes:
1. In some places we were relying on '==' operator comparisons
between ElementCounts and the scalar value 1. I didn't put this
operator in the new PolySize class, and thought it was actually
clearer to use the isScalar() function instead.
2. I removed the isByteSized function and replaced it with calls
to isKnownMultipleOf(8).
I've also renamed NextPowerOf2 to be coefficientNextPowerOf2 so
that it's more consistent with coefficientDivideBy.
Differential Revision: https://reviews.llvm.org/D88409
This expands upon the inloop reductions added in e9761688e41cb9e976,
allowing them to be inserted into tail folded loops. Reductions are
generates with the form:
x = select(mask, vecop, zero)
v = vecreduce.add(x)
c = add chain, v
Where zero here is chosen as the identity value for add reductions. The
backend is then expected to fold the select and the vecreduce into a
single predicated instruction.
Most of the code is fairly straight forward, except for the creation of
blockmasks which need to ensure they are created in dominance order. The
order they are added is altered to be after any phis, keeping the
requirements for the underlying IR.
Differential Revision: https://reviews.llvm.org/D84451
We currently collect the ICmp and Add from an induction variable,
marking them as dead so that vplan values are not created for them. This
extends that to include any single use trunk from the ICmp, which allows
the Add to more readily be removed too.
This can help with costing vplan nodes, as the ICmp and Add are more
reliably removed and are not double-counted.
Differential Revision: https://reviews.llvm.org/D88873
Update the code responsible for deleting VPBBs and recipes to properly
update users and release operands.
This is another preparation for D84680 & following patches towards
enabling modeling def-use chains in VPlan.
This adds a helper to convert a VPRecipeBase pointer to a VPUser, for
recipes that inherit from VPUser. Once VPRecipeBase directly inherits
from VPUser this helper can be removed.
When updating operands of a VPUser, we also have to adjust the list of
users for the new and old VPValues. This is required once we start
transitioning recipes to become VPValues.
Now that VPUser is not inheriting from VPValue, we can take the next
step and turn the recipes that already manage their operands via VPUser
into VPUsers directly. This is another small step towards traversing
def-use chains in VPlan.
This is NFC with respect to the generated code, but makes the interface
more powerful.
These were only really used for 2 things. One was to check if the operand matches the phi if it exists. The other was for the createOp method to build the reduction.
For the first case we still have the operation we just need to know how to index its operands. So I've modified getLHS/getRHS to just use the opcode/kind to know how to find the right operands on an instruction that is now passed in.
For the other case we had to create an OperationData object to set the LHS/RHS values and copy the opcode/kind from another object. We would then just call createOp on that temporary object. Instead I've made LHS/RHS arguments to createOp and removed all these temporary objects.
Differential Revision: https://reviews.llvm.org/D88193
All of the callers already have an Instruction *. Many of them
from a dyn_cast.
Also update the OperationData constructor to use a Instruction&
to remove a dyn_cast and make it clear that the pointer is non-null.
Differential Revision: https://reviews.llvm.org/D88132
This refactors VPuser to not inherit from VPValue to facilitate
introducing operations that introduce multiple VPValues (e.g.
VPInterleaveRecipe).
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D84679
This provides a convenient way to print VPValues and recipes in a
debugger. In particular it saves the user from instantiating
VPSlotTracker to print recipes or values.
