This was reverted to mitigate mitigate miscompiles caused by
the logical and/or to bitwise and/or fold. Reapply it now that
the underlying issue has been fixed by D101191.
-----
This patch folds more operations to poison.
Alive2 proof: https://alive2.llvm.org/ce/z/mxcb9G (it does not contain tests about div/rem because they fold to poison when raising UB)
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D92270
This patch disables the SIFormMemoryClauses pass at -O1. This pass has a
significant impact on compilation time, so we only want it to be enabled
starting from -O2.
Differential Revision: https://reviews.llvm.org/D101939
Improve the code generation of build_vector.
Use the v_pack_b32_f16 instruction instead of
v_and_b32 + v_lshl_or_b32
Differential Revision: https://reviews.llvm.org/D98081
Patch by Julien Pagès!
No need to handle invariant loads when avoiding WAR conflicts, as
there cannot be a vector store to the same memory location.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D101177
The waitcnt pass would increment the number of vmem events for some buffer
invalidates that were not handled by the pass.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D102252
Moving code sinking pass before structurizer creates more sinking
opportunities.
The extra flow edges introduced by the structurizer can have adverse
effects on sinking, because the sinking pass prefers moving instructions
to blocks with unique predecessors and the structurizer destroys that
property in some cases.
A notable example is moving high-latency image instructions across kills.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D101115
Large loads on target that does not useFlatForGlobal have to be split
in regbankselect. This did not happen in case when destination had vgpr
bank and address had sgpr bank.
Instead of checking if address bank is sgpr check bank of the destination.
Differential Revision: https://reviews.llvm.org/D101992
gfx9 does not work with negative offsets, gfx10 works only with
aligned negative offsets, but not with unaligned negative offsets.
This is slightly more conservative than needed, gfx9 does support
negative offsets when a VGPR address is used and gfx10 supports
negative, unaligned offsets when an SGPR address is used, but we
do not make use of that with this patch.
Differential Revision: https://reviews.llvm.org/D101292
Retrying after revert and fix (removed implicit def flag from operand). Now
passes with expensive_checks enabled.
Since there is a single scratch resource descriptor for all shaders, if there is
a wave32 and a wave64 shader (for instance for VsFs pairs)
then the const_index_stride will be incorrect for wave32 shaders.
Differential Revision: https://reviews.llvm.org/D101830
Change-Id: Ie3b8b2921237968caca91527dd0c97b1b0cc0360
Based off a discussion on D89281 - where the AARCH64 implementations were being replaced to use funnel shifts.
Any target that has efficient funnel shift lowering can handle the shift parts expansion using the same expansion, avoiding a lot of duplication.
I've generalized the X86 implementation and moved it to TargetLowering - so far I've found that AARCH64 and AMDGPU benefit, but many other targets (ARM, PowerPC + RISCV in particular) could easily use this with a few minor improvements to their funnel shift lowering (or the folding of their target ops that funnel shifts lower to).
NOTE: I'm trying to avoid adding full SHIFT_PARTS legalizer handling as I think it might actually be possible to remove these opcodes in the medium-term and use funnel shift / libcall expansion directly.
Differential Revision: https://reviews.llvm.org/D101987
Since there is a single scratch resource descriptor for all shaders, if there is
a wave32 and a wave64 shader (for instance for VsFs pairs)
then the const_index_stride will be incorrect for wave32 shaders.
Differential Revision: https://reviews.llvm.org/D101830
Change-Id: Id8de5566b0d1a07a814e2e7db016df9d20bf6d2c
Instruction test for inactive kill/demote needs to be based on
actual opcode not whether instruction would be lowered to demote.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D101966
First clean up the strange API of tryConstantFoldOp where it took an
immediate operand value, but no indication of which operand it was the
value for.
Second clean up the loop that calls tryConstantFoldOp so that it does
not have to restart from the beginning every time it folds an
instruction.
This is NFCI but there are some minor changes caused by the order in
which things are folded.
Differential Revision: https://reviews.llvm.org/D100031
This shall speedup compilation and also remove threshold
limitations used by memory dependency analysis.
It also seem to fix the bug in the coalescer_remat.ll
where an SMRD load was used in presence of a potentially
clobbering store.
Fixes: SWDEV-272132
Differential Revision: https://reviews.llvm.org/D101962
Preexisting waitcnt may not update the scoreboard if the instruction
being examined needed to wait on fewer counters than what was encoded in
the old waitcnt instruction. Fixing this results in the elimination of
some redudnat waitcnt.
These changes also enable combining consecutive waitcnt into a single
S_WAITCNT or S_WAITCNT_VSCNT instruction.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D100281
This change enables emitting CFI unwind information for debugging purpose
for targets with MCAsmInfo::ExceptionsType == ExceptionHandling::None.
Currently generating CFI unwind information is entangled with supporting
the exceptions, even when AsmPrinter explicitly recognizes that the unwind
tables are being generated as debug information.
In fact, the unwind information is not generated even if we specify
--force-dwarf-frame-section, unless exceptions are enabled. The LIT test
llvm/test/CodeGen/AMDGPU/debug_frame.ll demonstrates this behavior.
Enable this option for AMDGPU to prepare for future patches which add
complete CFI support.
Reviewed By: dblaikie, MaskRay
Differential Revision: https://reviews.llvm.org/D78778
Widen 1 and 2 byte scalar loads to 4 bytes when sufficiently
aligned to avoid using a global load.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D100430
An address can be a uniform sum of two i64 bit values.
That regularly happens in a loop where index is an induction
variable promoted to 64 bit by the LSR. We can materialize
zero in a VGPR and still use SADDR form of the load.
Differential Revision: https://reviews.llvm.org/D101591
Unfortunately the current call lowering code is built on top of the
legacy MVT/DAG based code. However, GlobalISel was not using it the
same way. In short, the DAG passes legalized types to the assignment
function, and GlobalISel was passing the original raw type if it was
simple.
I do believe the DAG lowering is conceptually broken since it requires
picking a type up front before knowing how/where the value will be
passed. This ends up being a problem for AArch64, which wants to pass
i1/i8/i16 values as a different size if passed on the stack or in
registers.
The argument type decision is split across 3 different places which is
hard to follow. SelectionDAG builder uses
getRegisterTypeForCallingConv to pick a legal type, tablegen gives the
illusion of controlling the type, and the target may have additional
hacks in the C++ part of the call lowering. AArch64 hacks around this
by not using the standard AnalyzeFormalArguments and special casing
i1/i8/i16 by looking at the underlying type of the original IR
argument.
I believe people have generally assumed the calling convention code is
processing the original types, and I've discovered a number of dead
paths in several targets.
x86 actually relies on the opposite behavior from AArch64, and relies
on x86_32 and x86_64 sharing calling convention code where the 64-bit
cases implicitly do not work on x86_32 due to using the pre-legalized
types.
AMDGPU targets without legal i16/f16 have always used a broken ABI
that promotes to i32/f32. GlobalISel accidentally fixed this to be the
ABI we should have, but this fixes it so we're using the worse ABI
that is compatible with the DAG. Ideally we would fix the DAG to match
the old GlobalISel behavior, but I don't wish to fight that battle.
A new native GlobalISel call lowering framework should let the target
process the incoming types directly.
CCValAssigns select a "ValVT" and "LocVT" but the meanings of these
aren't entirely clear. Different targets don't use them consistently,
even within their own call lowering code. My current belief is the
intent was "ValVT" is supposed to be the legalized value type to use
in the end, and and LocVT was supposed to be the ABI passed type
(which is also legalized).
With the default CCState::Analyze functions always passing the same
type for these arguments, these only differ when the TableGen part of
the lowering decide to promote the type from one legal type to
another. AArch64's i1/i8/i16 hack ends up inverting the meanings of
these values, so I had to add an additional hack to let the target
interpret how large the argument memory is.
Since targets don't consistently interpret ValVT and LocVT, this
doesn't produce quite equivalent code to the initial DAG
lowerings. I've opted to consistently interpret LocVT as the in-memory
size for stack passed values, and ValVT as the register type to assign
from that memory. We therefore produce extending loads directly out of
the IRTranslator, whereas the DAG would emit regular loads of smaller
values. This will also produce loads/stores that are wider than the
argument value if the allocated stack slot is larger (and there will
be undef padding bytes). If we had the optimizations to reduce
load/stores based on truncated values, this wouldn't produce a
different end result.
Since ValVT/LocVT are more consistently interpreted, we now will emit
more G_BITCASTS as requested by the CCAssignFn. For example AArch64
was directly assigning types to some physical vector registers which
according to the tablegen spec should have been casted to a vector
with a different element type.
This also moves the responsibility for inserting
G_ASSERT_SEXT/G_ASSERT_ZEXT from the target ValueHandlers into the
generic code, which is closer to how SelectionDAGBuilder works.
I had to xfail an x86 test since I don't see a quick way to fix it
right now (I filed bug 50035 for this). It's broken independently of
this change, and only triggers since now we end up with more ands
which hit the improperly handled selection pattern.
I also observed that FP arguments that need promotion (e.g. f16 passed
as f32) are broken, and use regular G_TRUNC and G_ANYEXT.
TLDR; the current call lowering infrastructure is bad and nobody has
ever understood how it chooses types.
- Move the code preventing CSE of `isConvergent` instrs into
`ProcessBlockCSE` (from `isProfitableToCSE`)
- Add comments explaining why `isConvergent` is used to prevent
CSE of non-local instrs in MachineCSE and the new test
Improve the code generation of fp_to_sint
and fp_to_uint for integer on 16-bits.
Differential Revision: https://reviews.llvm.org/D101481
Patch by Julien Pagès!
This patch disables some of the passes at -O1. These passes have a significant
impact on compilation time, so we only want them to be enabled starting from -O2.
Differential Revision: https://reviews.llvm.org/D101414
Removing an assertion introduced with D68945. The
patch was later reverted with 6531a78ac4b5, but failed
to remove this assertion. It causes a problem while
trying to split a 64-bit argument into sub registers.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D101594
Extend the legalization of global SADDR loads and stores
with changing to VADDR to the FLAT scratch instructions.
Differential Revision: https://reviews.llvm.org/D101408
Instead of legalizing saddr operand with a readfirstlane
when address is moved from SGPR to VGPR we can just
change the opcode.
Differential Revision: https://reviews.llvm.org/D101405
SITargetLowering::LowerFormalArguments asserts that none of these
features are used for graphics calling conventions, so
AnnotateKernelFeatures should not add them.
Differential Revision: https://reviews.llvm.org/D101534
SIPreEmitPeephole did not try to remove redundant s_set_gpr_idx_*
instructions in blocks that end with a conditional branch instruction.
This seems like a simple oversight.
Differential Revision: https://reviews.llvm.org/D101629
The only effect of the optimization is to remove s_set_gpr_idx_*
instructions, and update_mir_test_checks.py always inserts CHECK: rather
than CHECK-NEXT: checks, so without this implicit negative check, the
tests would always pass even if the optimization did nothing.
Differential Revision: https://reviews.llvm.org/D101622
