Implicit uses of non-register value types places impossible to satisfy
constraints on the legalizer / artifact combiner. These prevent
writing sensible legalize rules for the artifacts without triggering
infinite loops in the legalizer.
The verifier really needs to enforce this, but I'm not sure what the
exact conditions would look like yet.
SelectionDAG and GlobalISel take different failure paths for these and
end up producing different failure errors. Check both so the test
passes when the default is switched.
This interferes with GlobalISel's much better handling of the
situation.
This should really be disable for GlobalISel. However, the fallback
only re-runs the selection passes, and doesn't go back and rerun any
codegen IR passes. I haven't come up with a good solution to this
problem.
This is to initially handleg immAllOnesV, which should match
G_BUILD_VECTOR or G_BUILD_VECTOR_TRUNC. In the future, it could be
used for other patterns cases that map to multiple G_* instructions,
such as G_ADD and G_PTR_ADD.
D77152 tried to do this but got it wrong in the shift-by-zero case.
D86430 reverted the wrong code. Reimplement the optimization with
different code depending on whether the shift amount is known to be
non-zero (modulo bitwidth).
This improves code quality for fshl tests on AMDGPU, which only has an
fshr instruction.
Differential Revision: https://reviews.llvm.org/D86438
Handle workitem intrinsics. There isn't really away to adequately test
this right now, since none of the known bits users are fine grained
enough to test the edge conditions. This triggers a number of
instances of the new 64-bit to 32-bit shift combine in the existing
tests.
shl ([sza]ext x, y) => zext (shl x, y).
Turns expensive 64 bit shifts into 32 bit if it does not overflow the
source type:
This is a port of an AMDGPU DAG combine added in
5fa289f0d8ff85b9e14d2f814a90761378ab54ae. InstCombine does this
already, but we need to do it again here to apply it to shifts
introduced for lowered getelementptrs. This will help matching
addressing modes that use 32-bit offsets in a future patch.
TableGen annoyingly assumes only a single match data operand, so
introduce a reusable struct. However, this still requires defining a
separate GIMatchData for every combine which is still annoying.
Adds a morally equivalent function to the existing
getShiftAmountTy. Without this, we would have to do try to repeatedly
query the legalizer info and guess at what type to use for the shift.
This is a fixup of commit 0819a6416fd217 (D77152) which could
result in miscompiles. The miscompile could only happen for targets
where isOperationLegalOrCustom could return different values for
FSHL and FSHR.
The commit mentioned above added logic in expandFunnelShift to
convert between FSHL and FSHR by swapping direction of the
funnel shift. However, that transform is only legal if we know
that the shift count (modulo bitwidth) isn't zero.
Basically, since fshr(-1,0,0)==0 and fshl(-1,0,0)==-1 then doing a
rewrite such as fshr(X,Y,Z) => fshl(X,Y,0-Z) would be incorrect if
Z modulo bitwidth, could be zero.
```
$ ./alive-tv /tmp/test.ll
----------------------------------------
define i32 @src(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = fshl i32 %x, i32 %y, i32 %z
ret i32 %t0
}
=>
define i32 @tgt(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = sub i32 32, %z
%t1 = fshr i32 %x, i32 %y, i32 %t0
ret i32 %t1
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
i32 %x = #x00000000 (0)
i32 %y = #x00000400 (1024)
i32 %z = #x00000000 (0)
Source:
i32 %t0 = #x00000000 (0)
Target:
i32 %t0 = #x00000020 (32)
i32 %t1 = #x00000400 (1024)
Source value: #x00000000 (0)
Target value: #x00000400 (1024)
```
It could be possible to add back the transform, given that logic
is added to check that (Z % BW) can't be zero. Since there were
no test cases proving that such a transform actually would be useful
I decided to simply remove the faulty code in this patch.
Reviewed By: foad, lebedev.ri
Differential Revision: https://reviews.llvm.org/D86430
This is the slowest operation in the already slow pass.
Instead of sorting just put a stall list into an ordered
map.
Differential Revision: https://reviews.llvm.org/D86253
Do not break down local loads and stores so ds_read/write_b96/b128 in
ISelLowering can be selected on subtargets that support them and if align
requirements allow them.
Differential Revision: https://reviews.llvm.org/D84403
Fix local ds_read/write_b96/b128 so they can be selected if the alignment
allows. Otherwise, either pick appropriate ds_read2/write2 instructions or break
them down.
Differential Revision: https://reviews.llvm.org/D81638
Features UnalignedBufferAccess and UnalignedDSAccess are now used to determine
whether hardware supports such access.
UnalignedAccessMode should be used to enable them.
hasUnalignedBufferAccessEnabled() and hasUnalignedDSAccessEnabled() can be
now used to quickly check both.
Differential Revision: https://reviews.llvm.org/D84522
Adjust alignment requirements for ds_read/write_b96/b128.
GFX9 and onwards allow misaligned access for reads and writes but only if
SH_MEM_CONFIG.alignment_mode allows it.
UnalignedDSAccess is set on GCN subtargets from GFX9 onward to let us know if we
can relax alignment requirements.
UnalignedAccessMode acts similary to UnalignedBufferAccess for DS instructions
but only from GFX9 onward and is supposed to match alignment_mode. By default
alignment of 4 is required.
Differential Revision: https://reviews.llvm.org/D82788
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
Summary:
- HIP uses an unsized extern array `extern __shared__ T s[]` to declare
the dynamic shared memory, which size is not known at the
compile time.
Reviewers: arsenm, yaxunl, kpyzhov, b-sumner
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82496
Assuming this is used to split a memory access into smaller pieces,
the new access should still have the same aliasing properties as the
original memory access. As far as I can tell, this wasn't
intentionally dropped. It may be necessary to drop this if you are
moving the operand outside of the bounds of the original object in
such a way that it may alias another IR object, but I don't think any
of the existing users are doing this. Some of the uses widen into
unused alignment padding, which I think is OK.
Custom lower and widen odd sized loads up to the alignment. The
default set of legalization actions doesn't have a way to represent
this. This fixes naturally aligned <3 x s8> and <3 x s16> loads.
This also starts moving towards eliminating the buggy and
overcomplicated legalization rules for narrowing. All the memory size
changes should be done in the lower or custom action, not NarrowScalar
/ FewerElements. These currently have redundant and ambiguous code
with the lower action.
Summary:
When the resource descriptor is of vgpr, we need a waterfall loop
to read into a sgpr. In this patchm we generalized the implementation
to work for any regster class sizes, and extend the work to MIMG
instructions.
Fixes: SWDEV-223405
Reviewers:
arsenm, nhaehnle
Differential Revision:
https://reviews.llvm.org/D82603
By detecting this sign extend pattern early, we can uncover opportunities for
more optimizations.
Differential Revision: https://reviews.llvm.org/D85965
We weren't looking through the parameters on calls at all.
E.g., say you had
```
declare i32 @zext(i32 zeroext %x)
...
%y = call i32 @zext(i32 %something)
...
```
At the point of the call, we wouldn't know that the %something should have the
zeroext attribute.
This sets flags in about the same way as
TargetLoweringBase::ArgListEntry::setAttributes.
Differential Revision: https://reviews.llvm.org/D86125
Previously, it would successfully select and assert if not HSA or PAL
when expanding the pseudoinstruction. We don't need the
pseudoinstruction anymore since we know the total size after
legalization.
The code to determine the value size was overcomplicated and only
correct in the case where the result register already had a register
class assigned. We can always take the size directly from the
register's type.
The previous implementation was incorrect, and based off incorrect
instruction definitions. Unfortunately we can't match natural
addressing in a lot of cases due to the shift/scale applied in
getelementptrs. This relies on reducing the 64-bit shift to 32-bits.
The artifact combiner searches for the uses of G_MERGE_VALUES for
unmerge/trunc that need further combining. This also needs to handle
the vector merge opcodes the same way. This fixes leaving behind some
pairs I expected to be removed, that were if the legalizer is run a
second time.
We may have an SGPR->VGPR copy if a totally uniform pointer
calculation is used for a VGPR pointer operand.
Also hack around a bug in MUBUF matching which would incorrectly use
MUBUF for global when flat was requested. This should really be a
predicate on the parent pattern, but the DAG always checked this
manually inside the complex pattern.
The VGPR component is a 32-bit offset, not 64-bits.
I'm not sure what the correct syntax is for this. This maintains the
vaddr position and leaves saddr in the end "off" position. This is
particularly terrible for stores, since the operand order is now <vgpr
offset>, <data>, <sgpr base>, splitting the pointer operands. I
suppose this is a logical consequence from the mistake of not putting
the data operand first. I'm not sure what sp3 does.
This was only used for matching the saddr addressing mode of global
instructions, but this was not implemented correctly. The instruction
definitions aren't even correct, and are defined as using a 64-bit
VGPR component. Eliminate this pass to enable correcting the
instruction definitions. A new matching implementation can work in
GlobalISel or relying on DAG divergence information for the base
address.
It did not process hazard for ds_permute because it does not
load or store even though it is DS.
Differential Revision: https://reviews.llvm.org/D86003
These should really match either G_BUILD_VECTOR or
G_BUILD_VECTOR_TRUNC, but there doesn't seem to be an existing
mechanism for matching alternative opcodes. There is GIM_SwitchOpcode,
but it seems to assume it's oly only used for matcher optimization.
I could also omit any opcode check and rely on the matcher directly
checking the opcode, but the table optimizer currently assumes there
has to be an opcode check.
Also doesn't try to handle undef elements like the DAG version.
Unfortunately this ends up not working as expected on targets with
16-bit operations due to AMDGPUCodeGenPrepare's promotion of uniform
16-bit ops to i32.
The vector case annoyingly requires switching the checked opcode,
since constants for vectors aren't directly handled.
I also need to think more carefully about whether this is valid for i1.
PAL recently got support for multiple ELF sections and relocations,
therefore we can now use .rodata sections instead of forcing constants
into .text.
Differential Revision: https://reviews.llvm.org/D85895
