Stop using the _term variants of the mov to save the initial exec
value before the waterfall loop. This cannot be glued to the bottom of
the block because we may need to spill the result register. Just use a
regular mov, like the loops produced on the DAG path. Fixes some
verification errors with regalloc fast.
This was inserting the new G_CONSTANT after the use, and the later
block scan would run off the end. Fix calling SkipPHIsAndLabels for no
apparent reason.
Fma combine assumes that MRI.getVRegDef(Reg)->getOperand(0).getReg() = Reg
which is not true when Reg is defined by instruction with multiple defs
e.g. G_UNMERGE_VALUES.
Fix is to keep register and the instruction that defines register in
DefinitionAndSourceRegister and use when needed.
Differential Revision: https://reviews.llvm.org/D117032
After the split register allocation changes in eebe841a47cb it is no
longer necessary to reserve a VGPR before RA. This can also create bugs
when IPRA is enabled since we cannot predict that a called function may
not reserve any register if it does not have any SGPR spills. If that
happens those functions may override reserved registers that are
normally callee saved. Added a test to show this.
Fixes: SWDEV-309900
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D115551
This reverts commit 640beb38e7710b939b3cfb3f4c54accc694b1d30.
That commit caused performance degradtion in Quicksilver test QS:sGPU and a functional test failure in (rocPRIM rocprim.device_segmented_radix_sort).
Reverting until we have a better solution to s_cselect_b64 codegen cleanup
Change-Id: Ifc167b3c2dae7a65920676f22a97ba76485f3456
Reviewed By: kzhuravl
Differential Revision: https://reviews.llvm.org/D116686
Change-Id: I1abf49b74a7e2ba0e0205f747a4154a468b9d7f2
We were trying to guess at the original IR type for image intrinsics
after legalization to figure out if they were d16, but this didn't
work. Explicitly track if this is a d16 operation or not in the
opcode, as is done for the buffer intrinsics.
The OpenCL library is using f32 image writes with a dmask of 15 for
some reason, and this was incorrectly switching them to use d16. Fixes
image failures in the OpenCL conformance test. The equivalent dmask
for loads doesn't even select in either selector.
If we know the source is a valid object, we do not need to insert a
null check. This misses a lot of opportunities from
metadata/attributes not tracked in codegen.
Change CombinerHelper::matchBitfieldExtractFromShrAnd to use
getPreferredShiftAmountTy for the shift-amount-like operands of G_UBFX
just like all the other G_[SU]BFX combines do. This better matches the
AMDGPU legality rules for these instructions.
Differential Revision: https://reviews.llvm.org/D116803
1. Fix CombinerHelper::matchBitfieldExtractFromAnd to check legality
with the correct types for the G_UBFX that it builds.
2. Fix AMDGPUTargetLowering::isConstantUnsignedBitfieldExtractLegal to
match the legality rules: result and first operand can be s32 or s64
but the "shift amount" operands are always s32.
3. Add AMDGPU tests where the post-legalizer combiner would create
illegal MIR without the above fixes.
Differential Revision: https://reviews.llvm.org/D116802
This change adds the patterns and divergence predicates for the ctpop (bitcount) nodes
to make them selected according to the divergence.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D116284
The function that optimally inserts the exec mask
restore operations by combining the blocks currently
visits the lowered END_CF pseudos in the forward
direction as it iterates the setvector in the order
the entries are inserted in it.
Due to the absence of BranchFolding at -O0, the
irregularly placed BBs cause the forward traversal
to incorrectly place two unconditional branches in
certain BBs while combining them, especially when
an intervening block later gets optimized away in
subsequent iterations.
It is avoided by reverse iterating the setvector.
The blocks at the bottom of a function will get
optimized first before processing those at the top.
Fixes: SWDEV-315215
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D116273
This reverts commit 859ebca744e634dcc89a2294ffa41574f947bd62.
The change contained many unrelated changes and e.g. restored
unit test failes for the old lld port.
This reverts commit 640beb38e7710b939b3cfb3f4c54accc694b1d30.
That commit caused performance degradtion in Quicksilver test QS:sGPU and a functional test failure in (rocPRIM rocprim.device_segmented_radix_sort).
Reverting until we have a better solution to s_cselect_b64 codegen cleanup
Change-Id: Ibf8e397df94001f248fba609f072088a46abae08
Reviewed By: kzhuravl
Differential Revision: https://reviews.llvm.org/D115960
Change-Id: Id169459ce4dfffa857d5645a0af50b0063ce1105
In 'trunc' i16/32/64 to i1 pattern the 'and $src, 1' node supply operand to 'setcc'.
The latter is selected to S_CMP_EQ/V_CMP_EQ dependent on the divergence. In case the 'and' is scalar
and 'setcc' is divergent, we need VGPR to SGPR copy to adjust input operand for V_CMP_EQ.
This patch changes the S_AND_B32 to V_AND_B32_e64 in the 'trunc to i1' divergent patterns.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D116241
Removing dead frame indices for VGPR to AGPR spills is incorrect
when the frame index is shared by multiple objects, which may
occur due to stack slot coloring. The problem is that subsequent
code that processes the other object will assert because the stack
frame index is marked dead.
Removing dead frame indices is needed prior to stack slot
coloring, which is what happens with SGPR to VGPR spills. These
spills are lowered prior to stack slot coloring, but the VGPR
to AGPR spills are processed afterwards during the Prolog/Epilog
Inserter pass. This patch marks the VGPR to AGPR spill slot as
dead if the slot is not used by another object.
Differential Revision: https://reviews.llvm.org/D115996
Delete inst-select-insert.xfail.mir.
G_INSERT instructions in inst-select-insert.xfail.mir are no longer
legal after D114198. This breaks build bots, since builds with
LLVM_ENABLE_ASSERTIONS=Off don't check for legality and report cannot
select while build with LLVM_ENABLE_ASSERTIONS=On reports instruction
is not legal.
Artifact combiner is not able to access individual elements after using
LCMTy style merge/unmerge, extract and insert to change vector number of
elements (pad with undef or split to sub-vector instructions).
Use unmerge to individual elements instead and then merge elements into
requested types.
Change argument lowering for vectors and moreElementsVector to use
buildPadVectorWithUndefElements and buildDeleteTrailingVectorElements.
FewerElementsVector had a few helpers that had different behavior,
introduce new helper for most of the opcodes.
FewerElementsVector helper is more flexible since it can create leftover
instruction smaller then requested type (useful in case target wants to
avoid pad with undef and use fewer registers). If target does not want
leftover of different type it should call more elements first.
Some helpers were performing more elements first to have split without
leftover. Opcodes that used this helper use clampMaxNumElementsStrict
(does more elements first) in LegalizerInfo to avoid test changes.
Fixes failures caused by failing to combine artifacts created during
more/fewer elements vector.
Differential Revision: https://reviews.llvm.org/D114198
Precommit for D114198 (Rework more/fewer elements for vectors).
Regenerate auto-generated mir tests for vectors (use CHECK-NEXT instead
of CHECK). Remove -global-isel-abort=0 where it is no longer needed.
Add mir tests for different AMDGPU sub-targets and they way they lower
function vector arguments (tests for legalization artifact combiner).
This change enables divergence-driven instruction selection for the build_vector DAG nodes.
It also enables packed i16 instructions for GFX9.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D116187
Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D114652
These actions should only be used for adjusting the register types
(and the memory type as needed to satisfy the register
type). Unaligned accesses should be split as a type of lowering.
This has the effect of improving the code in many cases since now we
produce zextloads instead of separate loads with ands. The load/store
legality rules still seem far more complicated than necessary though.
ctlz/cttz get lowered to the set of target opcodes
This change enables the ISel to select SALU or VALU form according to the SDNode divergence.
CTLZ - S_FLBIT_I32_B32 if uniform and V_FFBH_U32_e64 if divergent
CTTZ - S_FF1_I32_B32 if uniform and V_FFBL_B32_e64 if divergent
Also @llvm.amdgcn.sffbh.i32 gets lowered to S_FLBIT_I32 if uniform and V_FFBH_I32_e64 if divergent
NOTE: 64bit versions S_FF1_I32_B64 and S_FLBIT_I32_B64 are not currently supported by the DAG ISel.
ctlz/cttz with i64 input are split into two 32bit instructions. Nevertheless, they already have the patterns
and were equipped with the divergence predicates to make sure they will be selected correctly when enabled.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D116044
This patch enables divergence predicates for min/max nodes.
It makes ISD::MIN/MAX selected to S_MIN_I(U)32/S_MAX_I(U)32 or V_MIN_I(U)32_e64/V_MAX_I(U)32_e64
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D115954
The "not" is defined as XOR $src -1.
We need to transform this pattern to either S_NOT_B32 or V_NOT_B32_e32
dependent on the "xor" node divergence.
Reviewed By: rampitec, foad
Differential Revision: https://reviews.llvm.org/D115884
The LOD bias operand is of type 'half' when the A16-bit is ON' for MIMG instructions.
'bias' is only 16-bit but occupies 32-bits with upper 16-bits containing junk.
The patch fixes both the paths(ISelDAG and GlobalISel) for proper encoding of LOD bias operand.
Differential Revision: https://reviews.llvm.org/D111754
This patch introduces the eviction analysis and the eviction advisor,
the default implementation, and the scaffolding for introducing the
other implementations of the advisor.
Differential Revision: https://reviews.llvm.org/D115707
D112556 added verification that the live interval for a subreg operand
must have subranges. This patch fixes a corner case, where if all subreg
operands for a particular register are undef uses then no subranges
are required. This matches how LiveIntervalCalc would build the live
intervals in the first place, since an undef use is not considered
to read the register.
Before this patch, CodeGen/AMDGPU/no-remat-indirect-mov.mir would fail
with -early-live-intervals:
# After Live Interval Analysis
...
*** Bad machine code: Live interval for subreg operand has no subranges ***
- function: index_vgpr_waterfall_loop
- basic block: %bb.1 (0x6a9a968) [352B;496B)
- instruction: 432B %24:vgpr_32 = V_MOV_B32_e32 undef %18.sub0:vreg_512, implicit $exec, implicit %18:vreg_512, implicit $m0
- operand 1: undef %18.sub0:vreg_512
Differential Revision: https://reviews.llvm.org/D115360
This is an optimization, but also fixes a compile failure when no free
VGPRs are available. The problem still exists for gfx908 where a
scratch register is still required. This also still exists for the
SGPR to AGPR case.
This was a workaround for not supporting indirect calls when
instcombine didn't eliminate constant expression casts of the callee
at -O0. Indirect calls are supposed to work now, so drop the hack.
Teach convertToThreeAddress to use the V_FMA_F16_gfx9 pseudo (i.e. the
standard instruction in GFX9 onwards) instead of V_FMA_F16 (the legacy
pseudo for GFX8 compatibility, which is no longer supported in GFX10).
This follows the example of macToMad in SIFoldOperands.
Differential Revision: https://reviews.llvm.org/D115731
